Hi, The patch set has been sent twice. Please ignore the later sent/received patch set.
I had sent the original patch set on Saturday, but I did not receive a confirmation nor did any mailing list archive(http://marc.info/?l=linux-scsi) pick them up (should have waited). The next day I resent the patch set and here we are. Regards, Raghava Aditya > -----Original Message----- > From: [email protected] [mailto:linux-scsi- > [email protected]] On Behalf Of Raghava Aditya Renukunta > Sent: Sunday, May 7, 2017 6:34 AM > To: [email protected]; [email protected]; linux- > [email protected] > Cc: Dave Carroll <[email protected]>; Gana Sridaran > <[email protected]>; Scott Benesh > <[email protected]>; Prasad Munirathnam > <[email protected]> > Subject: [PATCH 00/19] aacraid: Patchset with reset rework and misc fixes > > EXTERNAL EMAIL > > > This patchset primarily focuses on tweaking and hardening the controller > reset support for both ARC and HBA1000 devices. Now the driver can only > reset the controller thru eh reset. Included a srb memory fix and pci > dma allocation fix. > > Raghava Aditya Renukunta (19): > [SCSI] aacraid: Remove GFP_DMA for raw srb memory > [SCSI] aacraid: Fix DMAR issues with iommu=pt > [SCSI] aacraid: Added 32 and 64 queue depth for arc natives > [SCSI] aacraid: Set correct Queue Depth for HBA1000 RAW disks > [SCSI] aacraid: Remove reset support from check_health > [SCSI] aacraid: Change wait time for fib completion > [SCSI] aacraid: Log count info of scsi cmds before reset > [SCSI] aacraid: Print ctrl status before eh reset > [SCSI] aacraid: Using single reset mask for IOP reset > [SCSI] aacraid: Rework IOP reset > [SCSI] aacraid: Add periodic checks to see IOP reset status > [SCSI] aacraid: Rework SOFT reset code > [SCSI] aacraid: Rework aac_src_restart > [SCSI] aacraid: Use correct function to get ctrl health > [SCSI] aacraid: Make sure ioctl returns on controller reset > [SCSI] aacraid: Enable ctrl reset for both hba and arc > [SCSI] aacraid: Add reset debugging statements > [SCSI] aacraid: Remove reference to Series-9 > [SCSI] aacraid: Update driver version to 50834 > > drivers/scsi/aacraid/aachba.c | 17 ++- > drivers/scsi/aacraid/aacraid.h | 22 +++- > drivers/scsi/aacraid/commctrl.c | 13 ++- > drivers/scsi/aacraid/comminit.c | 18 +--- > drivers/scsi/aacraid/commsup.c | 73 +++++++------ > drivers/scsi/aacraid/linit.c | 232 ++++++++++++++++++++++++-------------- > -- > drivers/scsi/aacraid/src.c | 136 +++++++++++++---------- > 7 files changed, 296 insertions(+), 215 deletions(-) > > -- > 2.7.4
