Split off device, target, and bus reset functionality into
individual functions.
Signed-off-by: Hannes Reinecke <h...@suse.com>
---
drivers/scsi/aacraid/linit.c | 141 +++++++++++++++++++++++++++++++------------
1 file changed, 102 insertions(+), 39 deletions(-)
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index bf21006..57b2077 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -861,68 +861,129 @@ static u8 aac_eh_tmf_hard_reset_fib(struct aac_dev *aac,
struct fib *fib,
}
/*
- * aac_eh_reset - Reset command handling
+ * aac_eh_dev_reset - Device reset command handling
* @scsi_cmd: SCSI command block causing the reset
*
*/
-static int aac_eh_reset(struct scsi_cmnd* cmd)
+static int aac_eh_dev_reset(struct scsi_cmnd *cmd)
{
struct scsi_device * dev = cmd->device;
struct Scsi_Host * host = dev->host;
struct aac_dev * aac = (struct aac_dev *)host->hostdata;
int count;
u32 bus, cid;
+ struct fib *fib;
int ret = FAILED;
- int status = 0;
-
+ int status;
+ u8 command;
bus = aac_logical_to_phys(scmd_channel(cmd));
cid = scmd_id(cmd);
- if (bus < AAC_MAX_BUSES && cid < AAC_MAX_TARGETS &&
- aac->hba_map[bus][cid].devtype == AAC_DEVTYPE_NATIVE_RAW) {
- struct fib *fib;
- int status;
- u8 command;
+ if (bus >= AAC_MAX_BUSES || cid >= AAC_MAX_TARGETS ||
+ aac->hba_map[bus][cid].devtype != AAC_DEVTYPE_NATIVE_RAW)
+ return FAILED;
- pr_err("%s: Host adapter reset request. SCSI hang ?\n",
- AAC_DRIVERNAME);
+ pr_err("%s: Host adapter reset request. SCSI hang ?\n",
+ AAC_DRIVERNAME);
- fib = aac_fib_alloc(aac);
- if (!fib)
- return ret;
+ fib = aac_fib_alloc(aac);
+ if (!fib)
+ return ret;
- if (aac->hba_map[bus][cid].reset_state == 0) {
- /* start a HBA_TMF_LUN_RESET TMF request */
- command = aac_eh_tmf_lun_reset_fib(aac, fib,
- bus, cid,
- cmd->device->lun);
- aac->hba_map[bus][cid].reset_state++;
- } else if (aac->hba_map[bus][cid].reset_state >= 1) {
- /* already tried, start a hard reset now */
- command = aac_eh_tmf_hard_reset_fib(aac, fib, bus, cid);
- aac->hba_map[bus][cid].reset_state = 0;
+ /* start a HBA_TMF_LUN_RESET TMF request */
+ command = aac_eh_tmf_lun_reset_fib(aac, fib, bus, cid,
+ cmd->device->lun);
+
+ cmd->SCp.sent_command = 0;
+
+ status = aac_hba_send(command, fib,
+ (fib_callback) aac_hba_callback,
+ (void *) cmd);
+
+ /* Wait up to 15 seconds for completion */
+ for (count = 0; count < 15; ++count) {
+ if (cmd->SCp.sent_command) {
+ ret = SUCCESS;
+ break;
}
- cmd->SCp.sent_command = 0;
+ msleep(1000);
+ }
- status = aac_hba_send(command, fib,
- (fib_callback) aac_hba_callback,
- (void *) cmd);
+ return ret;
+}
- /* Wait up to 15 seconds for completion */
- for (count = 0; count < 15; ++count) {
- if (cmd->SCp.sent_command) {
- ret = SUCCESS;
- break;
- }
- msleep(1000);
+/*
+ * aac_eh_target_reset - Target reset command handling
+ * @scsi_cmd: SCSI command block causing the reset
+ *
+ */
+static int aac_eh_target_reset(struct scsi_cmnd *cmd)
+{
+ struct scsi_device * dev = cmd->device;
+ struct Scsi_Host * host = dev->host;
+ struct aac_dev * aac = (struct aac_dev *)host->hostdata;
+ int count;
+ u32 bus, cid;
+ int ret = FAILED;
+ struct fib *fib;
+ int status;
+ u8 command;
+
+ bus = aac_logical_to_phys(scmd_channel(cmd));
+ cid = scmd_id(cmd);
+ if (bus >= AAC_MAX_BUSES || cid >= AAC_MAX_TARGETS ||
+ aac->hba_map[bus][cid].devtype != AAC_DEVTYPE_NATIVE_RAW)
+ return FAILED;
+
+ pr_err("%s: Host adapter reset request. SCSI hang ?\n",
+ AAC_DRIVERNAME);
+
+ fib = aac_fib_alloc(aac);
+ if (!fib)
+ return ret;
+
+
+ /* already tried, start a hard reset now */
+ command = aac_eh_tmf_hard_reset_fib(aac, fib, bus, cid);
+
+ cmd->SCp.sent_command = 0;
+
+ status = aac_hba_send(command, fib,
+ (fib_callback) aac_hba_callback,
+ (void *) cmd);
+
+ /* Wait up to 15 seconds for completion */
+ for (count = 0; count < 15; ++count) {
+ if (cmd->SCp.sent_command) {
+ ret = SUCCESS;
+ break;
}
+ msleep(1000);
+ }
- if (ret == SUCCESS)
- return ret;
+ return ret;
+}
+
+/*
+ * aac_eh_bus_reset - Bus reset command handling
+ * @scsi_cmd: SCSI command block causing the reset
+ *
+ */
+static int aac_eh_bus_reset(struct scsi_cmnd* cmd)
+{
+ struct scsi_device * dev = cmd->device;
+ struct Scsi_Host * host = dev->host;
+ struct aac_dev * aac = (struct aac_dev *)host->hostdata;
+ int count;
+ u32 bus, cid;
+ int status = 0;
- } else {
+ bus = aac_logical_to_phys(scmd_channel(cmd));
+ cid = scmd_id(cmd);
+ if (bus >= AAC_MAX_BUSES || cid >= AAC_MAX_TARGETS ||
+ aac->hba_map[bus][cid].devtype != AAC_DEVTYPE_NATIVE_RAW) {
/* Mark the assoc. FIB to not complete, eh handler does this */
for (count = 0;
count < (host->can_queue + AAC_NUM_MGT_FIB);
@@ -1409,7 +1470,9 @@ ssize_t aac_get_serial_number(struct device *device, char
*buf)
.change_queue_depth = aac_change_queue_depth,
.sdev_attrs = aac_dev_attrs,
.eh_abort_handler = aac_eh_abort,
- .eh_bus_reset_handler = aac_eh_reset,
+ .eh_device_reset_handler = aac_eh_dev_reset,
+ .eh_target_reset_handler = aac_eh_target_reset,
+ .eh_bus_reset_handler = aac_eh_bus_reset,
.eh_host_reset_handler = aac_eh_host_reset,
.can_queue = AAC_NUM_IO_FIB,
.this_id = MAXIMUM_NUM_CONTAINERS,
--
1.8.5.6
