On 08/04/2017 06:26 PM, Meelis Roos wrote: >> Older Controller might not support volume status, so disable >> it if 'hpsa_allow_any' is present. > > It makes my DL380G4 boot with hpsa.hpsa_allow_any=1 and it seems to > work. Howevere, there are multiole verbose dmesg entries about failing > things: > Hehe. How cool is that?
> 0.267224] HP HPSA Driver (v 3.4.18-0) > [ 0.267351] hpsa 0000:04:03.0: unsupported board ID: 0x40910e11 > [ 0.267494] hpsa 0000:04:03.0: unsupported board ID: 0x40910e11 > [ 0.267695] hpsa 0000:04:03.0: PCI IRQ 51 -> rerouted to legacy IRQ 19 > [ 0.267889] hpsa 0000:04:03.0: Physical aborts not supported > [ 0.268036] hpsa 0000:04:03.0: Logical aborts not supported > [ 0.268163] hpsa 0000:04:03.0: HP SSD Smart Path aborts not supported > [ 0.448240] scsi host0: hpsa > [ 0.452228] hpsa 0000:04:03.0: report luns requested format 2, got 0 > [ 0.453950] hpsa 0000:04:03.0: hpsa0: hpsa_update_device_info: can't get > device id for host 0:C0:T0:L0 Direct-Access MAN3735MC > [ 0.454312] hpsa 0000:04:03.0: SCSI status: LUN:0000000000000000 > CDB:26000000000015000801000000000000 > [ 0.454525] hpsa 0000:04:03.0: SCSI Status = 02, Sense key = 0x05, ASC = > 0x3a, ASCQ = 0x00 Curious. CDB 26 is a vendor specific command, and the controller responds with 'Medium not present'. Will be checking what's happening here. > Among these, the following show up red in dmesg: > > report luns requested format 2, got 0 > hpsa0: hpsa_update_device_info: can't get device id for host 0:C0:T0:L0 > Direct-Access MAN3735MC > hpsa0: hpsa_update_device_info: can't get device id for host 0:C0:T-1:L-1 > Direct-Access MAP3735NC > report luns requested format 2, got 0 > Hmm. Looking into it. But thanks for testing! Cheers, Hannes -- Dr. Hannes Reinecke Teamlead Storage & Networking h...@suse.de +49 911 74053 688 SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton HRB 21284 (AG Nürnberg)
