On 11/30/2017 04:40 AM, Himanshu Madhani wrote:
> When driver is loaded in Target/Dual mode, it creates QPair
> to support MQ and allocates resources for each QPair. This Qpair
> initialization is delayed until the FW personality is changed to
> Dual/Target mode by issuing chip reset. At the time of chip reset
> firmware is re-initilized in correct personality all the QPairs
> are initialized by sending MBC_INITIALIZE_MULTIQ (001Fh).
> 
> This patch fixes memory leak by adding check to issue
> MBC_INITIALIZE_MULTIQ command only while deleting rsp/req queue
> when the flag is set for initiator mode, and clean up QPair resources
> correctly during the driver unload. This MBX does not need to be
> issued for Target/Dual mode because chip reset will reset ISP.
> 
> Fixes: d65237c7f0860 ("scsi: qla2xxx: Fix mailbox failure while deleting 
> Queue pairs")
> Cc: <sta...@vger.kernel.org> # 4.10+
> Signed-off-by: Himanshu Madhani <himanshu.madh...@cavium.com>
> ---
>  drivers/scsi/qla2xxx/qla_init.c |  4 +---
>  drivers/scsi/qla2xxx/qla_mid.c  | 18 ++++++++++--------
>  2 files changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
> index 57b8f43c5980..58663df38627 100644
> --- a/drivers/scsi/qla2xxx/qla_init.c
> +++ b/drivers/scsi/qla2xxx/qla_init.c
> @@ -8220,9 +8220,6 @@ int qla2xxx_delete_qpair(struct scsi_qla_host *vha, 
> struct qla_qpair *qpair)
>       int ret = QLA_FUNCTION_FAILED;
>       struct qla_hw_data *ha = qpair->hw;
>  
> -     if (!vha->flags.qpairs_req_created && !vha->flags.qpairs_rsp_created)
> -             goto fail;
> -
>       qpair->delete_in_progress = 1;
>       while (atomic_read(&qpair->ref_count))
>               msleep(500);
> @@ -8230,6 +8227,7 @@ int qla2xxx_delete_qpair(struct scsi_qla_host *vha, 
> struct qla_qpair *qpair)
>       ret = qla25xx_delete_req_que(vha, qpair->req);
>       if (ret != QLA_SUCCESS)
>               goto fail;
> +
>       ret = qla25xx_delete_rsp_que(vha, qpair->rsp);
>       if (ret != QLA_SUCCESS)
>               goto fail;
> diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
> index 618ca272d01a..e538e6308885 100644
> --- a/drivers/scsi/qla2xxx/qla_mid.c
> +++ b/drivers/scsi/qla2xxx/qla_mid.c
> @@ -575,14 +575,15 @@ qla25xx_free_rsp_que(struct scsi_qla_host *vha, struct 
> rsp_que *rsp)
>  int
>  qla25xx_delete_req_que(struct scsi_qla_host *vha, struct req_que *req)
>  {
> -     int ret = -1;
> +     int ret = QLA_SUCCESS;
>  
> -     if (req) {
> +     if (req && vha->flags.qpairs_req_created) {
>               req->options |= BIT_0;
>               ret = qla25xx_init_req_que(vha, req);
> +             if (ret != QLA_SUCCESS)
> +                     return QLA_FUNCTION_FAILED;
>       }
> -     if (ret == QLA_SUCCESS)
> -             qla25xx_free_req_que(vha, req);
> +     qla25xx_free_req_que(vha, req);
>  
>       return ret;
>  }
> @@ -590,14 +591,15 @@ qla25xx_delete_req_que(struct scsi_qla_host *vha, 
> struct req_que *req)
>  int
>  qla25xx_delete_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp)
>  {
> -     int ret = -1;
> +     int ret = QLA_SUCCESS;
>  
> -     if (rsp) {
> +     if (rsp && vha->flags.qpairs_rsp_created) {
>               rsp->options |= BIT_0;
>               ret = qla25xx_init_rsp_que(vha, rsp);
> +             if (ret != QLA_SUCCESS)
> +                     return QLA_FUNCTION_FAILED;
>       }
> -     if (ret == QLA_SUCCESS)
> -             qla25xx_free_rsp_que(vha, rsp);
> +     qla25xx_free_rsp_que(vha, rsp);
>  
>       return ret;
>  }
> 
Reviewed-by: Hannes Reinecke <h...@suse.com>

Cheers,

Hannes
-- 
Dr. Hannes Reinecke                Teamlead Storage & Networking
h...@suse.de                                   +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)

Reply via email to