On Wed, Feb 07, 2018 at 08:12:35AM -0800, Nilesh Javali wrote:
> From: Andrew Vasquez <andrew.vasq...@cavium.com>
>
> The data in NVRAM is not guaranteed to be NUL terminated.
> Since snprintf expects byte-stream to accommodate null byte,
> the CHAP secret is truncated.
> Use sprintf instead of snprintf to fix the truncation of
> CHAP name and secret.
>
> Signed-off-by: Andrew Vasquez <andrew.vasq...@cavium.com>
> Signed-off-by: Nilesh Javali <nilesh.jav...@cavium.com>
Makes sense, limits the data copied out instead of the entire output
length and ensures that the newline and \0 are always in the output.
Signed-off-by: Chris Leech <cle...@redhat.com>
> ---
> drivers/scsi/qedi/qedi_main.c | 24 ++++++++++++------------
> 1 file changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c
> index 8808f0d..deaed93 100644
> --- a/drivers/scsi/qedi/qedi_main.c
> +++ b/drivers/scsi/qedi/qedi_main.c
> @@ -1842,8 +1842,8 @@ static ssize_t qedi_show_boot_ini_info(void *data, int
> type, char *buf)
>
> switch (type) {
> case ISCSI_BOOT_INI_INITIATOR_NAME:
> - rc = snprintf(str, NVM_ISCSI_CFG_ISCSI_NAME_MAX_LEN, "%s\n",
> - initiator->initiator_name.byte);
> + rc = sprintf(str, "%.*s\n", NVM_ISCSI_CFG_ISCSI_NAME_MAX_LEN,
> + initiator->initiator_name.byte);
> break;
> default:
> rc = 0;
> @@ -1910,8 +1910,8 @@ static umode_t qedi_ini_get_attr_visibility(void *data,
> int type)
>
> switch (type) {
> case ISCSI_BOOT_TGT_NAME:
> - rc = snprintf(str, NVM_ISCSI_CFG_ISCSI_NAME_MAX_LEN, "%s\n",
> - block->target[idx].target_name.byte);
> + rc = sprintf(str, "%.*s\n", NVM_ISCSI_CFG_ISCSI_NAME_MAX_LEN,
> + block->target[idx].target_name.byte);
> break;
> case ISCSI_BOOT_TGT_IP_ADDR:
> if (ipv6_en)
> @@ -1932,20 +1932,20 @@ static umode_t qedi_ini_get_attr_visibility(void
> *data, int type)
> block->target[idx].lun.value[0]);
> break;
> case ISCSI_BOOT_TGT_CHAP_NAME:
> - rc = snprintf(str, NVM_ISCSI_CFG_CHAP_NAME_MAX_LEN, "%s\n",
> - chap_name);
> + rc = sprintf(str, "%.*s\n", NVM_ISCSI_CFG_CHAP_NAME_MAX_LEN,
> + chap_name);
> break;
> case ISCSI_BOOT_TGT_CHAP_SECRET:
> - rc = snprintf(str, NVM_ISCSI_CFG_CHAP_PWD_MAX_LEN, "%s\n",
> - chap_secret);
> + rc = sprintf(str, "%.*s\n", NVM_ISCSI_CFG_CHAP_NAME_MAX_LEN,
> + chap_secret);
> break;
> case ISCSI_BOOT_TGT_REV_CHAP_NAME:
> - rc = snprintf(str, NVM_ISCSI_CFG_CHAP_NAME_MAX_LEN, "%s\n",
> - mchap_name);
> + rc = sprintf(str, "%.*s\n", NVM_ISCSI_CFG_CHAP_NAME_MAX_LEN,
> + mchap_name);
> break;
> case ISCSI_BOOT_TGT_REV_CHAP_SECRET:
> - rc = snprintf(str, NVM_ISCSI_CFG_CHAP_PWD_MAX_LEN, "%s\n",
> - mchap_secret);
> + rc = sprintf(str, "%.*s\n", NVM_ISCSI_CFG_CHAP_NAME_MAX_LEN,
> + mchap_secret);
> break;
> case ISCSI_BOOT_TGT_FLAGS:
> rc = snprintf(str, 3, "%hhd\n", SYSFS_FLAG_FW_SEL_BOOT);
> --
> 1.8.3.1
>
