On Mon, Feb 05, 2018 at 08:02:07PM +0800, Can Guo wrote: > From: Gilad Broner <gbro...@codeaurora.org> > > Different platforms may have different number of lanes for the UFS link. > Add parameter to device tree specifying how many lanes should be > configured for the UFS link. And don't print err message for clocks > that are optional, this leads to unnecessary confusion about failure. > > Signed-off-by: Gilad Broner <gbro...@codeaurora.org> > Signed-off-by: Subhash Jadavani <subha...@codeaurora.org> > Signed-off-by: Can Guo <c...@codeaurora.org> > > diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt > b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt > index 5357919..4cee3f9 100644 > --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt > +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt > @@ -31,6 +31,9 @@ Optional properties: > defined or a value in the array is "0" then it is > assumed > that the frequency is set by the parent clock or a > fixed rate clock source. > +- lanes-per-direction: number of lanes available per direction - > either 1 or 2. > + Note that it is assume same number of lanes is used > both directions at once.
Seems reasonable until someone does not make things symmetrical. We should design for that case. > + If not specified, default is 2 lanes per direction. > > Note: If above properties are not defined it can be assumed that the supply > regulators or clocks are always on.
