> -----Original Message-----
> From: mr...@math.ut.ee [mailto:mr...@math.ut.ee] On Behalf Of Meelis
> Roos
> Sent: Thursday, February 08, 2018 11:58 PM
> To: linux-scsi@vger.kernel.org; dl-esc-Aacraid Linux Driver
> <aacr...@microsemi.com>
> Subject: [PATCH] aacraid: fix shutdown crash when init fails
> 
> 
> When aacraid init fails with "AAC0: adapter self-test failed.", shutdown 
> leads to
> UBSAN warning and then oops:
> 
> [154316.118423]
> =================================================================
> ===============
> [154316.118508] UBSAN: Undefined behaviour in drivers/scsi/scsi_lib.c:2328:27
> [154316.118566] member access within null pointer of type 'struct Scsi_Host'
> [154316.118631] CPU: 2 PID: 14530 Comm: reboot Tainted: G        W        
> 4.15.0-
> dirty #89
> [154316.118701] Hardware name: Hewlett Packard HP NetServer/HP System
> Board, BIOS 4.06.46 PW 06/25/2003 [154316.118774] Call Trace:
> [154316.118848]  dump_stack+0x48/0x65
> [154316.118916]  ubsan_epilogue+0xe/0x40 [154316.118976]
> __ubsan_handle_type_mismatch+0xfb/0x180
> [154316.119043]  scsi_block_requests+0x20/0x30 [154316.119135]
> aac_shutdown+0x18/0x40 [aacraid] [154316.119196]
> pci_device_shutdown+0x33/0x50 [154316.119269]
> device_shutdown+0x18a/0x390 [...] [154316.123435] BUG: unable to handle
> kernel NULL pointer dereference at 000000f4 [154316.123515] IP:
> scsi_block_requests+0xa/0x30
> 
> This is because aac_shutdown() does
> 
>         struct Scsi_Host *shost = pci_get_drvdata(dev);
>         scsi_block_requests(shost);
> 
> and that assumes shost has been assigned with pci_set_drvdata().
> 
> However, pci_set_drvdata(pdev, shost) is done in aac_probe_one() far after
> bailing out with error from calling the init function
> ((*aac_drivers[index].init)(aac)), and when the init function fails, no error 
> is
> returned from aac_probe_one() so PCI layer assumes there is driver attached,
> and tries to shut it down later.
> 
> Fix it by returning error from aac_probe_one() when card-specific init 
> function
> fails.
> 
> This fixes reboot on my HP NetRAID-4M with dead battery.
> 
> Signed-off-by: Meelis Roos <mr...@linux.ee>

Reviewed-by: Dave Carroll <david.carr...@microsemi.com>

Reply via email to