On 01/03/18 12:48, Stanislav Nijnikov wrote:
> Read from these files will return the integed value of the chosen power
> management level now. Separate entries were added to show the target
> UFS device and UIC link states. The description of the possible power
> managements levels was added to the ABI file. The on-write behaviour of
> these entries wasn't changed.
>
> Signed-off-by: Stanislav Nijnikov <stanislav.nijni...@wdc.com>
Acked-by: Adrian Hunter <adrian.hun...@intel.com>
> ---
> Documentation/ABI/testing/sysfs-driver-ufs | 67 ++++++++++++++++++++++
> drivers/scsi/ufs/ufs-sysfs.c | 92
> +++++++++++++++---------------
> 2 files changed, 114 insertions(+), 45 deletions(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-driver-ufs
> b/Documentation/ABI/testing/sysfs-driver-ufs
> index 07f1c2f..83735f7 100644
> --- a/Documentation/ABI/testing/sysfs-driver-ufs
> +++ b/Documentation/ABI/testing/sysfs-driver-ufs
> @@ -802,3 +802,70 @@ Description: This file shows the The amount of
> physical memory needed
> the particular logical unit. The full information about
> the attribute could be found at UFS specifications 2.1.
> The file is read only.
> +
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/rpm_lvl
> +Date: September 2014
> +Contact: Subhash Jadavani <subha...@codeaurora.org>
> +Description: This entry could be used to set or show the UFS device
> + runtime power management level. The current driver
> + implementation supports 6 levels with next target states:
> + 0 - an UFS device will stay active, an UIC link will
> + stay active
> + 1 - an UFS device will stay active, an UIC link will
> + hibernate
> + 2 - an UFS device will moved to sleep, an UIC link will
> + stay active
> + 3 - an UFS device will moved to sleep, an UIC link will
> + hibernate
> + 4 - an UFS device will be powered off, an UIC link will
> + hibernate
> + 5 - an UFS device will be powered off, an UIC link will
> + be powered off
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_dev_state
> +Date: February 2018
> +Contact: Subhash Jadavani <subha...@codeaurora.org>
> +Description: This entry shows the target power mode of an UFS device
> + for the chosen runtime power management level.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_link_state
> +Date: February 2018
> +Contact: Subhash Jadavani <subha...@codeaurora.org>
> +Description: This entry shows the target state of an UFS UIC link
> + for the chosen runtime power management level.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/spm_lvl
> +Date: September 2014
> +Contact: Subhash Jadavani <subha...@codeaurora.org>
> +Description: This entry could be used to set or show the UFS device
> + system power management level. The current driver
> + implementation supports 6 levels with next target states:
> + 0 - an UFS device will stay active, an UIC link will
> + stay active
> + 1 - an UFS device will stay active, an UIC link will
> + hibernate
> + 2 - an UFS device will moved to sleep, an UIC link will
> + stay active
> + 3 - an UFS device will moved to sleep, an UIC link will
> + hibernate
> + 4 - an UFS device will be powered off, an UIC link will
> + hibernate
> + 5 - an UFS device will be powered off, an UIC link will
> + be powered off
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/spm_target_dev_state
> +Date: February 2018
> +Contact: Subhash Jadavani <subha...@codeaurora.org>
> +Description: This entry shows the target power mode of an UFS device
> + for the chosen system power management level.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/spm_target_link_state
> +Date: February 2018
> +Contact: Subhash Jadavani <subha...@codeaurora.org>
> +Description: This entry shows the target state of an UFS UIC link
> + for the chosen system power management level.
> + The file is read only.
> diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c
> index cd7174d..4ff9e0b 100644
> --- a/drivers/scsi/ufs/ufs-sysfs.c
> +++ b/drivers/scsi/ufs/ufs-sysfs.c
> @@ -57,29 +57,8 @@ static ssize_t rpm_lvl_show(struct device *dev,
> struct device_attribute *attr, char *buf)
> {
> struct ufs_hba *hba = dev_get_drvdata(dev);
> - int curr_len;
> - u8 lvl;
> -
> - curr_len = snprintf(buf, PAGE_SIZE,
> - "\nCurrent Runtime PM level [%d] => dev_state [%s]
> link_state [%s]\n",
> - hba->rpm_lvl,
> - ufschd_ufs_dev_pwr_mode_to_string(
> - ufs_pm_lvl_states[hba->rpm_lvl].dev_state),
> - ufschd_uic_link_state_to_string(
> - ufs_pm_lvl_states[hba->rpm_lvl].link_state));
> -
> - curr_len += snprintf((buf + curr_len), (PAGE_SIZE - curr_len),
> - "\nAll available Runtime PM levels info:\n");
> - for (lvl = UFS_PM_LVL_0; lvl < UFS_PM_LVL_MAX; lvl++)
> - curr_len += snprintf((buf + curr_len), (PAGE_SIZE - curr_len),
> - "\tRuntime PM level [%d] => dev_state [%s]
> link_state [%s]\n",
> - lvl,
> - ufschd_ufs_dev_pwr_mode_to_string(
> - ufs_pm_lvl_states[lvl].dev_state),
> - ufschd_uic_link_state_to_string(
> - ufs_pm_lvl_states[lvl].link_state));
> -
> - return curr_len;
> +
> + return sprintf(buf, "%d\n", hba->rpm_lvl);
> }
>
> static ssize_t rpm_lvl_store(struct device *dev,
> @@ -88,33 +67,30 @@ static ssize_t rpm_lvl_store(struct device *dev,
> return ufs_sysfs_pm_lvl_store(dev, attr, buf, count, true);
> }
>
> +static ssize_t rpm_target_dev_state_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct ufs_hba *hba = dev_get_drvdata(dev);
> +
> + return sprintf(buf, "%s\n", ufschd_ufs_dev_pwr_mode_to_string(
> + ufs_pm_lvl_states[hba->rpm_lvl].dev_state));
> +}
> +
> +static ssize_t rpm_target_link_state_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct ufs_hba *hba = dev_get_drvdata(dev);
> +
> + return sprintf(buf, "%s\n", ufschd_uic_link_state_to_string(
> + ufs_pm_lvl_states[hba->rpm_lvl].link_state));
> +}
> +
> static ssize_t spm_lvl_show(struct device *dev,
> struct device_attribute *attr, char *buf)
> {
> struct ufs_hba *hba = dev_get_drvdata(dev);
> - int curr_len;
> - u8 lvl;
> -
> - curr_len = snprintf(buf, PAGE_SIZE,
> - "\nCurrent System PM level [%d] => dev_state [%s]
> link_state [%s]\n",
> - hba->spm_lvl,
> - ufschd_ufs_dev_pwr_mode_to_string(
> - ufs_pm_lvl_states[hba->spm_lvl].dev_state),
> - ufschd_uic_link_state_to_string(
> - ufs_pm_lvl_states[hba->spm_lvl].link_state));
>
> - curr_len += snprintf((buf + curr_len), (PAGE_SIZE - curr_len),
> - "\nAll available System PM levels info:\n");
> - for (lvl = UFS_PM_LVL_0; lvl < UFS_PM_LVL_MAX; lvl++)
> - curr_len += snprintf((buf + curr_len), (PAGE_SIZE - curr_len),
> - "\tSystem PM level [%d] => dev_state [%s]
> link_state [%s]\n",
> - lvl,
> - ufschd_ufs_dev_pwr_mode_to_string(
> - ufs_pm_lvl_states[lvl].dev_state),
> - ufschd_uic_link_state_to_string(
> - ufs_pm_lvl_states[lvl].link_state));
> -
> - return curr_len;
> + return sprintf(buf, "%d\n", hba->spm_lvl);
> }
>
> static ssize_t spm_lvl_store(struct device *dev,
> @@ -123,12 +99,38 @@ static ssize_t spm_lvl_store(struct device *dev,
> return ufs_sysfs_pm_lvl_store(dev, attr, buf, count, false);
> }
>
> +static ssize_t spm_target_dev_state_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct ufs_hba *hba = dev_get_drvdata(dev);
> +
> + return sprintf(buf, "%s\n", ufschd_ufs_dev_pwr_mode_to_string(
> + ufs_pm_lvl_states[hba->spm_lvl].dev_state));
> +}
> +
> +static ssize_t spm_target_link_state_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct ufs_hba *hba = dev_get_drvdata(dev);
> +
> + return sprintf(buf, "%s\n", ufschd_uic_link_state_to_string(
> + ufs_pm_lvl_states[hba->spm_lvl].link_state));
> +}
> +
> static DEVICE_ATTR_RW(rpm_lvl);
> +static DEVICE_ATTR_RO(rpm_target_dev_state);
> +static DEVICE_ATTR_RO(rpm_target_link_state);
> static DEVICE_ATTR_RW(spm_lvl);
> +static DEVICE_ATTR_RO(spm_target_dev_state);
> +static DEVICE_ATTR_RO(spm_target_link_state);
>
> static struct attribute *ufs_sysfs_ufshcd_attrs[] = {
> &dev_attr_rpm_lvl.attr,
> + &dev_attr_rpm_target_dev_state.attr,
> + &dev_attr_rpm_target_link_state.attr,
> &dev_attr_spm_lvl.attr,
> + &dev_attr_spm_target_dev_state.attr,
> + &dev_attr_spm_target_link_state.attr,
> NULL
> };
>
>
