[PATCH] hpsa: correct enclosure sas address

[Don Brace]

- separate enclosure logical identifier from the
  SAS address.

The original complaint was the lsscsi -t showed the same SAS
address of the two enclosures (SEP devices). In fact the
SAS address was being set to the Enclosure Logical Identifier (ELI).

Reviewed-by: Scott Teel <scott.t...@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barn...@microsemi.com>
Signed-off-by: Don Brace <don.br...@microsemi.com>
---
 drivers/scsi/hpsa.c |   25 +++++++++++++++++++++----
 drivers/scsi/hpsa.h |    1 +
 2 files changed, 22 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 15c7f3b6f35e..58bb70b886d7 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3440,11 +3440,11 @@ static void hpsa_get_enclosure_info(struct ctlr_info *h,
        struct ext_report_lun_entry *rle = &rlep->LUN[rle_index];
        u16 bmic_device_index = 0;
 
-       bmic_device_index = GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]);
-
-       encl_dev->sas_address =
+       encl_dev->eli =
                hpsa_get_enclosure_logical_identifier(h, scsi3addr);
 
+       bmic_device_index = GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]);
+
        if (encl_dev->target == -1 || encl_dev->lun == -1) {
                rc = IO_OK;
                goto out;
@@ -9697,7 +9697,24 @@ hpsa_sas_get_linkerrors(struct sas_phy *phy)
 static int
 hpsa_sas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
 {
-       *identifier = rphy->identify.sas_address;
+       struct Scsi_Host *shost = phy_to_shost(rphy);
+       struct ctlr_info *h;
+       struct hpsa_scsi_dev_t *sd;
+
+       if (!shost)
+               return -ENXIO;
+
+       h = shost_to_hba(shost);
+
+       if (!h)
+               return -ENXIO;
+
+       sd = hpsa_find_device_by_sas_rphy(h, rphy);
+       if (!sd)
+               return -ENXIO;
+
+       *identifier = sd->eli;
+
        return 0;
 }
 
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index fb9f5e7f8209..59e023696fff 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -68,6 +68,7 @@ struct hpsa_scsi_dev_t {
 #define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0"
        unsigned char device_id[16];    /* from inquiry pg. 0x83 */
        u64 sas_address;
+       u64 eli;                        /* from report diags. */
        unsigned char vendor[8];        /* bytes 8-15 of inquiry data */
        unsigned char model[16];        /* bytes 16-31 of inquiry data */
        unsigned char rev;              /* byte 2 of inquiry data */