On 11/8/18 3:44 PM, Steffen Maier wrote:
Use the already defined enum for this purpose to get at least some build
checking (even though an enum is type equivalent to an int in C).
v2.6.27 commit 287ac01acf22 ("[SCSI] zfcp: Cleanup code in zfcp_erp.c")
introduced the enum which was cpp defines previously.
Since struct zfcp_erp_action type is embedded into other structures
living in zfcp_def.h, we have to move enum zfcp_erp_act_type from
its private definition in zfcp_erp.c to the zfcp-global zfcp_def.h
Silence some false -Wswitch compiler warning cases with individual
NOP cases. When adding more enum values and building with W=1 we
would get compiler warnings about missed new cases.
Add missing break statements in some of the above switch cases.
No functional change, but making it future-proof.
I think all of these should have had a break statement ever since,
even if these switch cases happened to be the last ones in the switch
statement body.
"Fall through" in the context of switch case usually means not to have a
break and fall through to the subsequent switch case. However, I think
this old comment meant that here we do not have an _early return_ in the
switch case but the code path continues after the switch case body.
Signed-off-by: Steffen Maier <ma...@linux.ibm.com>
Reviewed-by: Benjamin Block <bbl...@linux.ibm.com>
---
drivers/s390/scsi/zfcp_def.h | 16 +++++++++++++++-
drivers/s390/scsi/zfcp_erp.c | 35 +++++++++++++++++++++++++----------
2 files changed, 40 insertions(+), 11 deletions(-)
--- a/drivers/s390/scsi/zfcp_def.h
+++ b/drivers/s390/scsi/zfcp_def.h
@@ -107,6 +107,20 @@ enum zfcp_erp_act_type {
ZFCP_ERP_ACTION_REOPEN_ADAPTER = 4,
};
+/*
+ * Values must fit into u16 because of code dependencies:
+ * zfcp_dbf_rec_run_lvl(), zfcp_dbf_rec_run(), zfcp_dbf_rec_run_wka(),
+ * &zfcp_dbf_rec_running.rec_step.
+ */
+enum zfcp_erp_steps {
+ ZFCP_ERP_STEP_UNINITIALIZED = 0x0000,
+ ZFCP_ERP_STEP_PHYS_PORT_CLOSING = 0x0010,
+ ZFCP_ERP_STEP_PORT_CLOSING = 0x0100,
+ ZFCP_ERP_STEP_PORT_OPENING = 0x0800,
+ ZFCP_ERP_STEP_LUN_CLOSING = 0x1000,
+ ZFCP_ERP_STEP_LUN_OPENING = 0x2000,
+};
+
struct zfcp_erp_action {
struct list_head list;
enum zfcp_erp_act_type type; /* requested action code */
@@ -114,7 +128,7 @@ struct zfcp_erp_action {
struct zfcp_port *port;
struct scsi_device *sdev;
u32 status; /* recovery status */
- u32 step; /* active step of this erp action */
+ enum zfcp_erp_steps step; /* active step of this erp action */
unsigned long fsf_req_id;
struct timer_list timer;
};
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -24,15 +24,6 @@ enum zfcp_erp_act_flags {
ZFCP_STATUS_ERP_NO_REF = 0x00800000,
};
-enum zfcp_erp_steps {
- ZFCP_ERP_STEP_UNINITIALIZED = 0x0000,
- ZFCP_ERP_STEP_PHYS_PORT_CLOSING = 0x0010,
- ZFCP_ERP_STEP_PORT_CLOSING = 0x0100,
- ZFCP_ERP_STEP_PORT_OPENING = 0x0800,
- ZFCP_ERP_STEP_LUN_CLOSING = 0x1000,
- ZFCP_ERP_STEP_LUN_OPENING = 0x2000,
-};
-
/*
* Eyecatcher pseudo flag to bitwise or-combine with enum zfcp_erp_act_type.
* Used to indicate that an ERP action could not be set up despite a detected
@@ -900,6 +891,13 @@ static int zfcp_erp_port_forced_strategy
case ZFCP_ERP_STEP_PHYS_PORT_CLOSING:
if (!(status & ZFCP_STATUS_PORT_PHYS_OPEN))
return ZFCP_ERP_SUCCEEDED;
+ break;
+ case ZFCP_ERP_STEP_PORT_CLOSING:
+ case ZFCP_ERP_STEP_PORT_OPENING:
+ case ZFCP_ERP_STEP_LUN_CLOSING:
+ case ZFCP_ERP_STEP_LUN_OPENING:
+ /* NOP */
+ break;
}
return ZFCP_ERP_FAILED;
}
@@ -974,7 +972,12 @@ static int zfcp_erp_port_strategy_open_c
port->d_id = 0;
return ZFCP_ERP_FAILED;
}
- /* fall through otherwise */
+ /* no early return otherwise, continue after switch case */
+ break;
+ case ZFCP_ERP_STEP_LUN_CLOSING:
+ case ZFCP_ERP_STEP_LUN_OPENING:
+ /* NOP */
+ break;
}
return ZFCP_ERP_FAILED;
}
@@ -998,6 +1001,12 @@ static int zfcp_erp_port_strategy(struct
if (p_status & ZFCP_STATUS_COMMON_OPEN)
return ZFCP_ERP_FAILED;
break;
+ case ZFCP_ERP_STEP_PHYS_PORT_CLOSING:
+ case ZFCP_ERP_STEP_PORT_OPENING:
+ case ZFCP_ERP_STEP_LUN_CLOSING:
+ case ZFCP_ERP_STEP_LUN_OPENING:
+ /* NOP */
+ break;
}
close_init_done:
@@ -1058,6 +1067,12 @@ static int zfcp_erp_lun_strategy(struct
case ZFCP_ERP_STEP_LUN_OPENING:
if (atomic_read(&zfcp_sdev->status) & ZFCP_STATUS_COMMON_OPEN)
return ZFCP_ERP_SUCCEEDED;
+ break;
+ case ZFCP_ERP_STEP_PHYS_PORT_CLOSING:
+ case ZFCP_ERP_STEP_PORT_CLOSING:
+ case ZFCP_ERP_STEP_PORT_OPENING:
+ /* NOP */
+ break;
}
return ZFCP_ERP_FAILED;
}
Why don't you use 'default:' here?
Clearly the compiler would warn you if the didn't specify all remaining
cases, so 'default:' seems to match here pretty well ...
Cheers,
Hannes
--
Dr. Hannes Reinecke Teamlead Storage & Networking
h...@suse.de +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)
