Hi Brace, In this patch series, do you have fixed and verified the timeout issue? https://patchwork.kernel.org/patch/10637797/
Thanks, - Alex Don Brace <don.br...@microsemi.com> 于2018年12月8日周六 上午6:28写道： > > These patches are based on Linus's tree > > The changes are: > > - smartpqi-add-support-for-PQI-Config-Table-handshake > . add support for get/set controller features. > - smartpqi-add-retries-for-device-resets > . re-attempt device reset. > - smartpqi-add-no_write_same-for-logical-volumes > . turn off WRITE SAME for logical volumes. > - smartpqi-correct-host-serial-num-for-ssa > . update host serial number > - smartpqi-turn-off-lun-data-caching-for-ptraid > . get fresh lun list from RBODS. > - smartpqi-refactor-sending-controller-raid-requests > . condense commonly used code. > - smartpqi-add-sysfs-attributes > . add in driver attributes. > - smartpqi-add-h3c-ssid > . add support for more controllers. > - smartpqi-fix-disk-name-mount-point > . correct sysfs attribute for unique ids. > - smartpqi-wake-up-drives-after-os-resumes-from-suspend > . have OS start up disks after resume. > - smartpqi-enhance-numa-node-detection > . set pci device to correct NUMA node. > - smartpqi-add-support-for-huawei-controllers > . add support for more controllers. > - smartpqi-check-for-null-device-pointers > . wait for all outstanding I/O to complete before removing a volume > - smartpqi-allow-for-larger-raid-maps > . correct rare case for very large volume configurations. > - smartpqi-do-not-offline-disks-for-transient-did-no-connect-conditions > . remove call to scsi_device_set_state > - smartpqi-correct-volume-status > . correct rare case for volume deletion during a scan operation. > - smartpqi-correct-lun-reset-issues > . clear scsi cmd result after a reset. > - smartpqi-add-module-param-to-disable-irq-affinity > . allow some customers to change IRQ affinity. > - smartpqi-add-smp_utils-support > . add support for smp_utils. > - smartpqi-bump-driver-version > > --- > > Ajish Koshy (2): > smartpqi: add support for huawei controllers > smartpqi: allow for larger raid maps > > Dave Carroll (7): > smartpqi: add no_write_same for logical volumes > smartpqi: turn off lun data caching for ptraid > smartpqi: refactor sending controller raid requests > smartpqi: add sysfs attributes > smartpqi: wake up drives after os resumes from suspend > smartpqi: do not offline disks for transient did no connect conditions > smartpqi: correct volume status > > Don Brace (3): > smartpqi: add module param to disable irq affinity > smartpqi: add smp_utils support > smartpqi: bump driver version > > Kevin Barnett (2): > smartpqi: add support for PQI Config Table handshake > smartpqi: correct lun reset issues > > Mahesh Rajashekhara (3): > Add retries for device reset > smartpqi: correct host serial num for ssa > smartpqi: check for null device pointers > > Murthy Bhat (2): > smartpqi: add h3c ssid > smartpqi: fix disk name mount point > > Sagar Biradar (1): > smartpqi: enhance numa node detection > > > drivers/scsi/smartpqi/smartpqi.h | 144 +++ > drivers/scsi/smartpqi/smartpqi_init.c | 992 > ++++++++++++++++++++---- > drivers/scsi/smartpqi/smartpqi_sas_transport.c | 164 ++++ > 3 files changed, 1131 insertions(+), 169 deletions(-) > > -- > Signature -- Thanks and Best Regards, Feng Li(Alex)
