"<name>-fixed-regulator" device tree property can be
safely removed because below things are fixed or resolved,
1. "<name>-max-microamp" becomes optional property: Undefined
"<name>-max-microamp" will not cause initialization fail if
"<name>-fixed-regulator" is not defined.
2. Current switching operation (by regulator_set_load) now has rules:
Regulators will have undefined current limit if
"<name>-fixed-regulator" is not defined. But this is safe because
only regulator which has configured current limit from
"<name>-max-microamp" property is allowed to change its load.
Although "<name>-fixed-regulator" is not used in any dt-bindings
in tree, this patch is still safe for regulators already defined
"<name>-fixed-regulator", the reason is described as below.
If a regulator defined "<name>-fixed-regulator" before, the behavior
after this patch is described as below,
1. "<name>-max-microamp":
If a regulator defined "<name>-fixed-regulator", it is not necessary
to define "<name>-max-microamp" property in device tree and it is
expected to have an undefined current limit, i.e., "max_uA" field
is zero in struct ufs_vreg. This is exactly the same as patched.
2. "vcc-supply-1p8" or volatge range settings:
* For vcc, vccq or vccq2, these three regulators shall not define
"<name>-fixed-regulator" because defining it will lead to
undefined voltage range and thus voltage switching will be
unexpected.
* For other regulators with undefined voltage range, voltage range
will be still undefined after patched.
Therefore this patch is safe for all existed regulators with
"<name>-fixed-regulator" property already defined.
Signed-off-by: Stanley Chu <[email protected]>
---
drivers/scsi/ufs/ufshcd-pltfrm.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index 2f244d388ca8..a667e7ba1c8b 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -151,11 +151,6 @@ static int ufshcd_populate_vreg(struct device *dev, const
char *name,
vreg->name = kstrdup(name, GFP_KERNEL);
- /* if fixed regulator no need further initialization */
- snprintf(prop_name, MAX_PROP_SIZE, "%s-fixed-regulator", name);
- if (of_property_read_bool(np, prop_name))
- goto out;
-
snprintf(prop_name, MAX_PROP_SIZE, "%s-max-microamp", name);
if (of_property_read_u32(np, prop_name, &vreg->max_uA)) {
dev_info(dev, "%s: unable to find %s\n", __func__, prop_name);
--
2.18.0
