On 8/13/19 3:25 AM, Christoph Hellwig wrote:
> The hpsim platform supports the HP IA64 simulator which was useful as a
> bring up platform.  But it is fairly non-standard vs real IA64 system
> in that it for example doesn't support ACPI.  It also comes with a
> whole bunch of simulator specific drivers.  Remove it to simplify the
> IA64 port.
> 
> Note that through a weird twist only them hpsim boot loader built the
> vmlinux.gz file, so the makefile targets for that are moved to the
> main ia64 Makefile now.
> 
> Signed-off-by: Christoph Hellwig <h...@lst.de>

Okay to remove hpsim support
Acked-by: Tom Vaden <tom.va...@hpe.com>

> ---
>   arch/ia64/Kconfig                     |  34 +-
>   arch/ia64/Makefile                    |  27 +-
>   arch/ia64/configs/sim_defconfig       |  52 ---
>   arch/ia64/hp/sim/Kconfig              |  23 --
>   arch/ia64/hp/sim/Makefile             |  17 -
>   arch/ia64/hp/sim/boot/Makefile        |  37 --
>   arch/ia64/hp/sim/boot/boot_head.S     | 165 --------
>   arch/ia64/hp/sim/boot/bootloader.c    | 175 ---------
>   arch/ia64/hp/sim/boot/bootloader.lds  |  67 ----
>   arch/ia64/hp/sim/boot/fw-emu.c        | 374 ------------------
>   arch/ia64/hp/sim/boot/ssc.h           |  36 --
>   arch/ia64/hp/sim/hpsim.S              |  11 -
>   arch/ia64/hp/sim/hpsim_console.c      |  77 ----
>   arch/ia64/hp/sim/hpsim_irq.c          |  76 ----
>   arch/ia64/hp/sim/hpsim_machvec.c      |   3 -
>   arch/ia64/hp/sim/hpsim_setup.c        |  41 --
>   arch/ia64/hp/sim/hpsim_ssc.h          |  37 --
>   arch/ia64/hp/sim/simeth.c             | 510 -------------------------
>   arch/ia64/hp/sim/simscsi.c            | 373 ------------------
>   arch/ia64/hp/sim/simserial.c          | 521 --------------------------
>   arch/ia64/include/asm/acpi.h          |   4 +-
>   arch/ia64/include/asm/hpsim.h         |  17 -
>   arch/ia64/include/asm/iosapic.h       |  12 -
>   arch/ia64/include/asm/machvec.h       |  11 +-
>   arch/ia64/include/asm/machvec_hpsim.h |  19 -
>   arch/ia64/kernel/Makefile             |   3 +-
>   arch/ia64/kernel/irq_ia64.c           |   2 -
>   arch/ia64/kernel/setup.c              |  13 +-
>   28 files changed, 26 insertions(+), 2711 deletions(-)
>   delete mode 100644 arch/ia64/configs/sim_defconfig
>   delete mode 100644 arch/ia64/hp/sim/Kconfig
>   delete mode 100644 arch/ia64/hp/sim/Makefile
>   delete mode 100644 arch/ia64/hp/sim/boot/Makefile
>   delete mode 100644 arch/ia64/hp/sim/boot/boot_head.S
>   delete mode 100644 arch/ia64/hp/sim/boot/bootloader.c
>   delete mode 100644 arch/ia64/hp/sim/boot/bootloader.lds
>   delete mode 100644 arch/ia64/hp/sim/boot/fw-emu.c
>   delete mode 100644 arch/ia64/hp/sim/boot/ssc.h
>   delete mode 100644 arch/ia64/hp/sim/hpsim.S
>   delete mode 100644 arch/ia64/hp/sim/hpsim_console.c
>   delete mode 100644 arch/ia64/hp/sim/hpsim_irq.c
>   delete mode 100644 arch/ia64/hp/sim/hpsim_machvec.c
>   delete mode 100644 arch/ia64/hp/sim/hpsim_setup.c
>   delete mode 100644 arch/ia64/hp/sim/hpsim_ssc.h
>   delete mode 100644 arch/ia64/hp/sim/simeth.c
>   delete mode 100644 arch/ia64/hp/sim/simscsi.c
>   delete mode 100644 arch/ia64/hp/sim/simserial.c
>   delete mode 100644 arch/ia64/include/asm/hpsim.h
>   delete mode 100644 arch/ia64/include/asm/machvec_hpsim.h
> 
> diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
> index ae3aca14506e..63db7a5378ac 100644
> --- a/arch/ia64/Kconfig
> +++ b/arch/ia64/Kconfig
> @@ -10,11 +10,11 @@ config IA64
>       bool
>       select ARCH_MIGHT_HAVE_PC_PARPORT
>       select ARCH_MIGHT_HAVE_PC_SERIO
> -     select ACPI if (!IA64_HP_SIM)
> -     select ARCH_SUPPORTS_ACPI if (!IA64_HP_SIM)
> +     select ACPI
> +     select ARCH_SUPPORTS_ACPI
>       select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
>       select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
> -     select FORCE_PCI if (!IA64_HP_SIM)
> +     select FORCE_PCI
>       select PCI_DOMAINS if PCI
>       select PCI_SYSCALL if PCI
>       select HAVE_UNSTABLE_SCHED_CLOCK
> @@ -140,7 +140,6 @@ config IA64_GENERIC
>         HP-zx1/sx1000         For HP systems
>         HP-zx1/sx1000+swiotlb For HP systems with (broken) DMA-constrained 
> devices.
>         SGI-UV                For SGI UV systems
> -       Ski-simulator         For the HP simulator 
> <http://www.hpl.hp.com/research/linux/ski/>
>   
>         If you don't know what to do, choose "generic".
>   
> @@ -181,11 +180,6 @@ config IA64_SGI_UV
>         to select this option.  If in doubt, select ia64 generic support
>         instead.
>   
> -config IA64_HP_SIM
> -     bool "Ski-simulator"
> -     select SWIOTLB
> -     depends on !PM
> -
>   endchoice
>   
>   choice
> @@ -239,14 +233,7 @@ config IA64_PAGE_SIZE_64KB
>   
>   endchoice
>   
> -if IA64_HP_SIM
> -config HZ
> -     default 32
> -endif
> -
> -if !IA64_HP_SIM
>   source "kernel/Kconfig.hz"
> -endif
>   
>   config IA64_BRL_EMU
>       bool
> @@ -265,11 +252,6 @@ config IA64_CYCLONE
>         Say Y here to enable support for IBM EXA Cyclone time source.
>         If you're unsure, answer N.
>   
> -config IOSAPIC
> -     bool
> -     depends on !IA64_HP_SIM
> -     default y
> -
>   config FORCE_MAX_ZONEORDER
>       int "MAX_ORDER (11 - 17)"  if !HUGETLB_PAGE
>       range 11 17  if !HUGETLB_PAGE
> @@ -373,7 +355,7 @@ config ARCH_DISCONTIGMEM_DEFAULT
>   
>   config NUMA
>       bool "NUMA support"
> -     depends on !IA64_HP_SIM && !FLATMEM
> +     depends on !FLATMEM
>       select ACPI_NUMA if ACPI
>       help
>         Say Y to compile the kernel to support NUMA (Non-Uniform Memory
> @@ -395,7 +377,7 @@ config NODES_SHIFT
>   config VIRTUAL_MEM_MAP
>       bool "Virtual mem map"
>       depends on !SPARSEMEM
> -     default y if !IA64_HP_SIM
> +     default y
>       help
>         Say Y to compile the kernel with support for a virtual mem map.
>         This code also only takes effect if a memory hole of greater than
> @@ -478,7 +460,7 @@ config IA64_HP_AML_NFW
>   
>   config KEXEC
>       bool "kexec system call"
> -     depends on !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
> +     depends on !SMP || HOTPLUG_CPU
>       select KEXEC_CORE
>       help
>         kexec is a system call that implements the ability to shutdown your
> @@ -496,7 +478,7 @@ config KEXEC
>   
>   config CRASH_DUMP
>         bool "kernel crash dumps"
> -       depends on IA64_MCA_RECOVERY && !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
> +       depends on IA64_MCA_RECOVERY && (!SMP || HOTPLUG_CPU)
>         help
>           Generate crash dump after being started by kexec.
>   
> @@ -518,8 +500,6 @@ endif
>   
>   endmenu
>   
> -source "arch/ia64/hp/sim/Kconfig"
> -
>   config MSPEC
>       tristate "Memory special operations driver"
>       depends on IA64
> diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
> index 0d730b061f72..8b866fc1f9cb 100644
> --- a/arch/ia64/Makefile
> +++ b/arch/ia64/Makefile
> @@ -39,6 +39,12 @@ $(error Sorry, you need a newer version of the assember, 
> one that is built from
>               ftp://ftp.hpl.hp.com/pub/linux-ia64/gas-030124.tar.gz)
>   endif
>   
> +quiet_cmd_gzip = GZIP    $@
> +cmd_gzip = cat $(real-prereqs) | gzip -n -f -9 > $@
> +
> +quiet_cmd_objcopy = OBJCOPY $@
> +cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
> +
>   KBUILD_CFLAGS += $(cflags-y)
>   head-y := arch/ia64/kernel/head.o
>   
> @@ -52,15 +58,12 @@ core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/
>   core-$(CONFIG_IA64_SGI_UV)  += arch/ia64/uv/
>   
>   drivers-$(CONFIG_PCI)               += arch/ia64/pci/
> -drivers-$(CONFIG_IA64_HP_SIM)        += arch/ia64/hp/sim/
>   drivers-$(CONFIG_IA64_HP_ZX1)       += arch/ia64/hp/common/ 
> arch/ia64/hp/zx1/
>   drivers-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/hp/common/ 
> arch/ia64/hp/zx1/
> -drivers-$(CONFIG_IA64_GENERIC)       += arch/ia64/hp/common/ 
> arch/ia64/hp/zx1/ arch/ia64/hp/sim/ arch/ia64/uv/
> +drivers-$(CONFIG_IA64_GENERIC)       += arch/ia64/hp/common/ 
> arch/ia64/hp/zx1/ arch/ia64/uv/
>   drivers-$(CONFIG_OPROFILE)  += arch/ia64/oprofile/
>   
> -boot := arch/ia64/hp/sim/boot
> -
> -PHONY += boot compressed check
> +PHONY += compressed check
>   
>   all: compressed unwcheck
>   
> @@ -68,22 +71,21 @@ compressed: vmlinux.gz
>   
>   vmlinuz: vmlinux.gz
>   
> -vmlinux.gz: vmlinux
> -     $(Q)$(MAKE) $(build)=$(boot) $@
> +vmlinux.gz: vmlinux.bin FORCE
> +     $(call if_changed,gzip)
> +
> +vmlinux.bin: vmlinux FORCE
> +     $(call if_changed,objcopy)
>   
>   unwcheck: vmlinux
>       -$(Q)READELF=$(READELF) $(PYTHON) 
> $(srctree)/arch/ia64/scripts/unwcheck.py $<
>   
>   archclean:
> -     $(Q)$(MAKE) $(clean)=$(boot)
>   
>   archheaders:
>       $(Q)$(MAKE) $(build)=arch/ia64/kernel/syscalls all
>   
> -CLEAN_FILES += vmlinux.gz bootloader
> -
> -boot:        lib/lib.a vmlinux
> -     $(Q)$(MAKE) $(build)=$(boot) $@
> +CLEAN_FILES += vmlinux.gz
>   
>   install: vmlinux.gz
>       sh $(srctree)/arch/ia64/install.sh $(KERNELRELEASE) $< System.map 
> "$(INSTALL_PATH)"
> @@ -91,7 +93,6 @@ install: vmlinux.gz
>   define archhelp
>     echo '* compressed        - Build compressed kernel image'
>     echo '  install   - Install compressed kernel image'
> -  echo '  boot               - Build vmlinux and bootloader for Ski 
> simulator'
>     echo '* unwcheck  - Check vmlinux for invalid unwind info'
>   endef
>   
> diff --git a/arch/ia64/configs/sim_defconfig b/arch/ia64/configs/sim_defconfig
> deleted file mode 100644
> index f0f69fdbddae..000000000000
> --- a/arch/ia64/configs/sim_defconfig
> +++ /dev/null
> @@ -1,52 +0,0 @@
> -CONFIG_SYSVIPC=y
> -CONFIG_IKCONFIG=y
> -CONFIG_IKCONFIG_PROC=y
> -CONFIG_LOG_BUF_SHIFT=16
> -CONFIG_MODULES=y
> -CONFIG_MODULE_UNLOAD=y
> -CONFIG_MODULE_FORCE_UNLOAD=y
> -CONFIG_MODVERSIONS=y
> -CONFIG_PARTITION_ADVANCED=y
> -CONFIG_IA64_HP_SIM=y
> -CONFIG_MCKINLEY=y
> -CONFIG_IA64_PAGE_SIZE_64KB=y
> -CONFIG_SMP=y
> -CONFIG_NR_CPUS=64
> -CONFIG_PREEMPT=y
> -CONFIG_IA64_PALINFO=m
> -CONFIG_EFI_VARS=y
> -CONFIG_BINFMT_MISC=y
> -CONFIG_NET=y
> -CONFIG_PACKET=y
> -CONFIG_INET=y
> -CONFIG_IP_MULTICAST=y
> -# CONFIG_IPV6 is not set
> -# CONFIG_STANDALONE is not set
> -CONFIG_BLK_DEV_LOOP=y
> -CONFIG_BLK_DEV_RAM=y
> -CONFIG_SCSI=y
> -CONFIG_BLK_DEV_SD=y
> -CONFIG_SCSI_CONSTANTS=y
> -CONFIG_SCSI_LOGGING=y
> -CONFIG_SCSI_SPI_ATTRS=y
> -# CONFIG_INPUT_KEYBOARD is not set
> -# CONFIG_INPUT_MOUSE is not set
> -# CONFIG_SERIO_I8042 is not set
> -# CONFIG_LEGACY_PTYS is not set
> -CONFIG_EFI_RTC=y
> -# CONFIG_VGA_CONSOLE is not set
> -CONFIG_HP_SIMETH=y
> -CONFIG_HP_SIMSERIAL=y
> -CONFIG_HP_SIMSERIAL_CONSOLE=y
> -CONFIG_HP_SIMSCSI=y
> -CONFIG_EXT2_FS=y
> -CONFIG_EXT3_FS=y
> -# CONFIG_EXT3_FS_XATTR is not set
> -CONFIG_PROC_KCORE=y
> -CONFIG_HUGETLBFS=y
> -CONFIG_NFS_FS=y
> -CONFIG_NFSD=y
> -CONFIG_NFSD_V3=y
> -CONFIG_DEBUG_INFO=y
> -CONFIG_DEBUG_KERNEL=y
> -CONFIG_DEBUG_MUTEXES=y
> diff --git a/arch/ia64/hp/sim/Kconfig b/arch/ia64/hp/sim/Kconfig
> deleted file mode 100644
> index 56fb4f1d4f7c..000000000000
> --- a/arch/ia64/hp/sim/Kconfig
> +++ /dev/null
> @@ -1,23 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0
> -
> -menu "HP Simulator drivers"
> -     depends on IA64_HP_SIM || IA64_GENERIC
> -
> -config HP_SIMETH
> -     bool "Simulated Ethernet "
> -     depends on NET
> -
> -config HP_SIMSERIAL
> -     bool "Simulated serial driver support"
> -     depends on TTY
> -
> -config HP_SIMSERIAL_CONSOLE
> -     bool "Console for HP simulator"
> -     depends on HP_SIMSERIAL
> -
> -config HP_SIMSCSI
> -     bool "Simulated SCSI disk"
> -     depends on SCSI=y
> -
> -endmenu
> -
> diff --git a/arch/ia64/hp/sim/Makefile b/arch/ia64/hp/sim/Makefile
> deleted file mode 100644
> index 0224a13d2c5b..000000000000
> --- a/arch/ia64/hp/sim/Makefile
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0
> -#
> -# ia64/platform/hp/sim/Makefile
> -#
> -# Copyright (C) 2002 Hewlett-Packard Co.
> -#    David Mosberger-Tang <dav...@hpl.hp.com>
> -# Copyright (C) 1999 Silicon Graphics, Inc.
> -# Copyright (C) Srinivasa Thirumalachar (spra...@engr.sgi.com)
> -#
> -
> -obj-y := hpsim_irq.o hpsim_setup.o hpsim.o
> -obj-$(CONFIG_IA64_GENERIC) += hpsim_machvec.o
> -
> -obj-$(CONFIG_HP_SIMETH)      += simeth.o
> -obj-$(CONFIG_HP_SIMSERIAL) += simserial.o
> -obj-$(CONFIG_HP_SIMSERIAL_CONSOLE) += hpsim_console.o
> -obj-$(CONFIG_HP_SIMSCSI) += simscsi.o
> diff --git a/arch/ia64/hp/sim/boot/Makefile b/arch/ia64/hp/sim/boot/Makefile
> deleted file mode 100644
> index df6e9968c845..000000000000
> --- a/arch/ia64/hp/sim/boot/Makefile
> +++ /dev/null
> @@ -1,37 +0,0 @@
> -#
> -# ia64/boot/Makefile
> -#
> -# This file is subject to the terms and conditions of the GNU General Public
> -# License.  See the file "COPYING" in the main directory of this archive
> -# for more details.
> -#
> -# Copyright (C) 1998, 2003 by David Mosberger-Tang <dav...@hpl.hp.com>
> -#
> -
> -targets-$(CONFIG_IA64_HP_SIM)  += bootloader
> -targets := vmlinux.bin vmlinux.gz $(targets-y)
> -
> -quiet_cmd_cptotop = LN      $@
> -      cmd_cptotop = ln -f $< $@
> -
> -vmlinux.gz: $(obj)/vmlinux.gz $(addprefix $(obj)/,$(targets-y))
> -     $(call cmd,cptotop)
> -     @echo '  Kernel: $@ is ready'
> -
> -boot: bootloader
> -
> -bootloader: $(obj)/bootloader
> -     $(call cmd,cptotop)
> -
> -$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
> -     $(call if_changed,gzip)
> -
> -$(obj)/vmlinux.bin: vmlinux FORCE
> -     $(call if_changed,objcopy)
> -
> -
> -LDFLAGS_bootloader = -static -T
> -
> -$(obj)/bootloader: $(src)/bootloader.lds $(obj)/bootloader.o 
> $(obj)/boot_head.o $(obj)/fw-emu.o \
> -                   lib/lib.a arch/ia64/lib/lib.a FORCE
> -     $(call if_changed,ld)
> diff --git a/arch/ia64/hp/sim/boot/boot_head.S 
> b/arch/ia64/hp/sim/boot/boot_head.S
> deleted file mode 100644
> index a7d178fb41e8..000000000000
> --- a/arch/ia64/hp/sim/boot/boot_head.S
> +++ /dev/null
> @@ -1,165 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -/*
> - * Copyright (C) 1998-2003 Hewlett-Packard Co
> - *   David Mosberger-Tang <dav...@hpl.hp.com>
> - */
> -
> -#include <asm/asmmacro.h>
> -#include <asm/pal.h>
> -
> -     .bss
> -     .align 16
> -stack_mem:
> -     .skip 16834
> -
> -     .text
> -
> -/* This needs to be defined because lib/string.c:strlcat() calls it in case 
> of error... */
> -GLOBAL_ENTRY(printk)
> -     break 0
> -END(printk)
> -
> -GLOBAL_ENTRY(_start)
> -     .prologue
> -     .save rp, r0
> -     .body
> -     movl gp = __gp
> -     movl sp = stack_mem+16384-16
> -     bsw.1
> -     br.call.sptk.many rp=start_bootloader
> -0:   nop 0             /* dummy nop to make unwinding work */
> -END(_start)
> -
> -/*
> - * Set a break point on this function so that symbols are available to set 
> breakpoints in
> - * the kernel being debugged.
> - */
> -GLOBAL_ENTRY(debug_break)
> -     br.ret.sptk.many b0
> -END(debug_break)
> -
> -GLOBAL_ENTRY(ssc)
> -     .regstk 5,0,0,0
> -     mov r15=in4
> -     break 0x80001
> -     br.ret.sptk.many b0
> -END(ssc)
> -
> -GLOBAL_ENTRY(jmp_to_kernel)
> -     .regstk 2,0,0,0
> -     mov r28=in0
> -     mov b7=in1
> -     br.sptk.few b7
> -END(jmp_to_kernel)
> -
> -/*
> - * r28 contains the index of the PAL function
> - * r29--31 the args
> - * Return values in ret0--3 (r8--11)
> - */
> -GLOBAL_ENTRY(pal_emulator_static)
> -     mov r8=-1
> -     mov r9=256
> -     ;;
> -     cmp.gtu p6,p7=r9,r28            /* r28 <= 255? */
> -(p6) br.cond.sptk.few static
> -     ;;
> -     mov r9=512
> -     ;;
> -     cmp.gtu p6,p7=r9,r28
> -(p6) br.cond.sptk.few stacked
> -     ;;
> -static:      cmp.eq p6,p7=PAL_PTCE_INFO,r28
> -(p7) br.cond.sptk.few 1f
> -     ;;
> -     mov r8=0                        /* status = 0 */
> -     movl r9=0x100000000             /* tc.base */
> -     movl r10=0x0000000200000003     /* count[0], count[1] */
> -     movl r11=0x1000000000002000     /* stride[0], stride[1] */
> -     br.cond.sptk.few rp
> -1:   cmp.eq p6,p7=PAL_FREQ_RATIOS,r28
> -(p7) br.cond.sptk.few 1f
> -     mov r8=0                        /* status = 0 */
> -     movl r9 =0x100000064            /* proc_ratio (1/100) */
> -     movl r10=0x100000100            /* bus_ratio<<32 (1/256) */
> -     movl r11=0x100000064            /* itc_ratio<<32 (1/100) */
> -     ;;
> -1:   cmp.eq p6,p7=PAL_RSE_INFO,r28
> -(p7) br.cond.sptk.few 1f
> -     mov r8=0                        /* status = 0 */
> -     mov r9=96                       /* num phys stacked */
> -     mov r10=0                       /* hints */
> -     mov r11=0
> -     br.cond.sptk.few rp
> -1:   cmp.eq p6,p7=PAL_CACHE_FLUSH,r28                /* PAL_CACHE_FLUSH */
> -(p7) br.cond.sptk.few 1f
> -     mov r9=ar.lc
> -     movl r8=524288                  /* flush 512k million cache lines 
> (16MB) */
> -     ;;
> -     mov ar.lc=r8
> -     movl r8=0xe000000000000000
> -     ;;
> -.loop:       fc r8
> -     add r8=32,r8
> -     br.cloop.sptk.few .loop
> -     sync.i
> -     ;;
> -     srlz.i
> -     ;;
> -     mov ar.lc=r9
> -     mov r8=r0
> -     ;;
> -1:   cmp.eq p6,p7=PAL_PERF_MON_INFO,r28
> -(p7) br.cond.sptk.few 1f
> -     mov r8=0                        /* status = 0 */
> -     movl r9 =0x08122f04             /* generic=4 width=47 retired=8 
> cycles=18 */
> -     mov r10=0                       /* reserved */
> -     mov r11=0                       /* reserved */
> -     mov r16=0xffff                  /* implemented PMC */
> -     mov r17=0x3ffff                 /* implemented PMD */
> -     add r18=8,r29                   /* second index */
> -     ;;
> -     st8 [r29]=r16,16                /* store implemented PMC */
> -     st8 [r18]=r0,16                 /* clear remaining bits  */
> -     ;;
> -     st8 [r29]=r0,16                 /* clear remaining bits  */
> -     st8 [r18]=r0,16                 /* clear remaining bits  */
> -     ;;
> -     st8 [r29]=r17,16                /* store implemented PMD */
> -     st8 [r18]=r0,16                 /* clear remaining bits  */
> -     mov r16=0xf0                    /* cycles count capable PMC */
> -     ;;
> -     st8 [r29]=r0,16                 /* clear remaining bits  */
> -     st8 [r18]=r0,16                 /* clear remaining bits  */
> -     mov r17=0xf0                    /* retired bundles capable PMC */
> -     ;;
> -     st8 [r29]=r16,16                /* store cycles capable */
> -     st8 [r18]=r0,16                 /* clear remaining bits  */
> -     ;;
> -     st8 [r29]=r0,16                 /* clear remaining bits  */
> -     st8 [r18]=r0,16                 /* clear remaining bits  */
> -     ;;
> -     st8 [r29]=r17,16                /* store retired bundle capable */
> -     st8 [r18]=r0,16                 /* clear remaining bits  */
> -     ;;
> -     st8 [r29]=r0,16                 /* clear remaining bits  */
> -     st8 [r18]=r0,16                 /* clear remaining bits  */
> -     ;;
> -1:   cmp.eq p6,p7=PAL_VM_SUMMARY,r28
> -(p7) br.cond.sptk.few 1f
> -     mov     r8=0                    /* status = 0  */
> -     movl    r9=0x2044040020F1865    /* num_tc_levels=2, num_unique_tcs=4 */
> -                                     /* max_itr_entry=64, max_dtr_entry=64 */
> -                                     /* hash_tag_id=2, max_pkr=15 */
> -                                     /* key_size=24, phys_add_size=50, vw=1 
> */
> -     movl    r10=0x183C              /* rid_size=24, impl_va_msb=60 */
> -     ;;
> -1:   cmp.eq p6,p7=PAL_MEM_ATTRIB,r28
> -(p7) br.cond.sptk.few 1f
> -     mov     r8=0                    /* status = 0 */
> -     mov     r9=0x80|0x01            /* NatPage|WB */
> -     ;;
> -1:   br.cond.sptk.few rp
> -stacked:
> -     br.ret.sptk.few rp
> -END(pal_emulator_static)
> diff --git a/arch/ia64/hp/sim/boot/bootloader.c 
> b/arch/ia64/hp/sim/boot/bootloader.c
> deleted file mode 100644
> index 6d804608dc81..000000000000
> --- a/arch/ia64/hp/sim/boot/bootloader.c
> +++ /dev/null
> @@ -1,175 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * arch/ia64/hp/sim/boot/bootloader.c
> - *
> - * Loads an ELF kernel.
> - *
> - * Copyright (C) 1998-2003 Hewlett-Packard Co
> - *   David Mosberger-Tang <dav...@hpl.hp.com>
> - *   Stephane Eranian <eran...@hpl.hp.com>
> - *
> - * 01/07/99 S.Eranian modified to pass command line arguments to kernel
> - */
> -struct task_struct;  /* forward declaration for elf.h */
> -
> -#include <linux/elf.h>
> -#include <linux/init.h>
> -#include <linux/kernel.h>
> -
> -#include <asm/elf.h>
> -#include <asm/intrinsics.h>
> -#include <asm/pal.h>
> -#include <asm/pgtable.h>
> -#include <asm/sal.h>
> -
> -#include "ssc.h"
> -
> -struct disk_req {
> -     unsigned long addr;
> -     unsigned len;
> -};
> -
> -struct disk_stat {
> -     int fd;
> -     unsigned count;
> -};
> -
> -extern void jmp_to_kernel (unsigned long bp, unsigned long e_entry);
> -extern struct ia64_boot_param *sys_fw_init (const char *args, int arglen);
> -extern void debug_break (void);
> -
> -static void
> -cons_write (const char *buf)
> -{
> -     unsigned long ch;
> -
> -     while ((ch = *buf++) != '\0') {
> -             ssc(ch, 0, 0, 0, SSC_PUTCHAR);
> -             if (ch == '\n')
> -               ssc('\r', 0, 0, 0, SSC_PUTCHAR);
> -     }
> -}
> -
> -#define MAX_ARGS 32
> -
> -void
> -start_bootloader (void)
> -{
> -     static char mem[4096];
> -     static char buffer[1024];
> -     unsigned long off;
> -     int fd, i;
> -     struct disk_req req;
> -     struct disk_stat stat;
> -     struct elfhdr *elf;
> -     struct elf_phdr *elf_phdr;      /* program header */
> -     unsigned long e_entry, e_phoff, e_phnum;
> -     register struct ia64_boot_param *bp;
> -     char *kpath, *args;
> -     long arglen = 0;
> -
> -     ssc(0, 0, 0, 0, SSC_CONSOLE_INIT);
> -
> -     /*
> -      * S.Eranian: extract the commandline argument from the simulator
> -      *
> -      * The expected format is as follows:
> -         *
> -      *      kernelname args...
> -      *
> -      * Both are optional but you can't have the second one without the 
> first.
> -      */
> -     arglen = ssc((long) buffer, 0, 0, 0, SSC_GET_ARGS);
> -
> -     kpath = "vmlinux";
> -     args = buffer;
> -     if (arglen > 0) {
> -             kpath = buffer;
> -             while (*args != ' ' && *args != '\0')
> -                     ++args, --arglen;
> -             if (*args == ' ')
> -                     *args++ = '\0', --arglen;
> -     }
> -
> -     if (arglen <= 0) {
> -             args = "";
> -             arglen = 1;
> -     }
> -
> -     fd = ssc((long) kpath, 1, 0, 0, SSC_OPEN);
> -
> -     if (fd < 0) {
> -             cons_write(kpath);
> -             cons_write(": file not found, reboot now\n");
> -             for(;;);
> -     }
> -     stat.fd = fd;
> -     off = 0;
> -
> -     req.len = sizeof(mem);
> -     req.addr = (long) mem;
> -     ssc(fd, 1, (long) &req, off, SSC_READ);
> -     ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION);
> -
> -     elf = (struct elfhdr *) mem;
> -     if (elf->e_ident[0] == 0x7f && strncmp(elf->e_ident + 1, "ELF", 3) != 
> 0) {
> -             cons_write("not an ELF file\n");
> -             return;
> -     }
> -     if (elf->e_type != ET_EXEC) {
> -             cons_write("not an ELF executable\n");
> -             return;
> -     }
> -     if (!elf_check_arch(elf)) {
> -             cons_write("kernel not for this processor\n");
> -             return;
> -     }
> -
> -     e_entry = elf->e_entry;
> -     e_phnum = elf->e_phnum;
> -     e_phoff = elf->e_phoff;
> -
> -     cons_write("loading ");
> -     cons_write(kpath);
> -     cons_write("...\n");
> -
> -     for (i = 0; i < e_phnum; ++i) {
> -             req.len = sizeof(*elf_phdr);
> -             req.addr = (long) mem;
> -             ssc(fd, 1, (long) &req, e_phoff, SSC_READ);
> -             ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION);
> -             if (stat.count != sizeof(*elf_phdr)) {
> -                     cons_write("failed to read phdr\n");
> -                     return;
> -             }
> -             e_phoff += sizeof(*elf_phdr);
> -
> -             elf_phdr = (struct elf_phdr *) mem;
> -
> -             if (elf_phdr->p_type != PT_LOAD)
> -                     continue;
> -
> -             req.len = elf_phdr->p_filesz;
> -             req.addr = __pa(elf_phdr->p_paddr);
> -             ssc(fd, 1, (long) &req, elf_phdr->p_offset, SSC_READ);
> -             ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION);
> -             memset((char *)__pa(elf_phdr->p_paddr) + elf_phdr->p_filesz, 0,
> -                    elf_phdr->p_memsz - elf_phdr->p_filesz);
> -     }
> -     ssc(fd, 0, 0, 0, SSC_CLOSE);
> -
> -     cons_write("starting kernel...\n");
> -
> -     /* fake an I/O base address: */
> -     ia64_setreg(_IA64_REG_AR_KR0, 0xffffc000000UL);
> -
> -     bp = sys_fw_init(args, arglen);
> -
> -     ssc(0, (long) kpath, 0, 0, SSC_LOAD_SYMBOLS);
> -
> -     debug_break();
> -     jmp_to_kernel((unsigned long) bp, e_entry);
> -
> -     cons_write("kernel returned!\n");
> -     ssc(-1, 0, 0, 0, SSC_EXIT);
> -}
> diff --git a/arch/ia64/hp/sim/boot/bootloader.lds 
> b/arch/ia64/hp/sim/boot/bootloader.lds
> deleted file mode 100644
> index f3f284d6514c..000000000000
> --- a/arch/ia64/hp/sim/boot/bootloader.lds
> +++ /dev/null
> @@ -1,67 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -OUTPUT_FORMAT("elf64-ia64-little")
> -OUTPUT_ARCH(ia64)
> -ENTRY(_start)
> -SECTIONS
> -{
> -  /* Read-only sections, merged into text segment: */
> -  . = 0x100000;
> -
> -  _text = .;
> -  .text : { *(__ivt_section) *(.text) }
> -  _etext = .;
> -
> -  /* Global data */
> -  _data = .;
> -  .rodata : { *(.rodata) *(.rodata.*) }
> -  .data    : { *(.data) *(.gnu.linkonce.d*) CONSTRUCTORS }
> -  __gp = ALIGN (8) + 0x200000;
> -  .got           : { *(.got.plt) *(.got) }
> -  /* We want the small data sections together, so single-instruction offsets
> -     can access them all, and initialized data all before uninitialized, so
> -     we can shorten the on-disk segment size.  */
> -  .sdata     : { *(.sdata) }
> -  _edata  =  .;
> -
> -  __bss_start = .;
> -  .sbss      : { *(.sbss) *(.scommon) }
> -  .bss       : { *(.bss) *(COMMON) }
> -  . = ALIGN(64 / 8);
> -  __bss_stop = .;
> -  _end = . ;
> -
> -  /* Stabs debugging sections.  */
> -  .stab 0 : { *(.stab) }
> -  .stabstr 0 : { *(.stabstr) }
> -  .stab.excl 0 : { *(.stab.excl) }
> -  .stab.exclstr 0 : { *(.stab.exclstr) }
> -  .stab.index 0 : { *(.stab.index) }
> -  .stab.indexstr 0 : { *(.stab.indexstr) }
> -  .comment 0 : { *(.comment) }
> -  /* DWARF debug sections.
> -     Symbols in the DWARF debugging sections are relative to the beginning
> -     of the section so we begin them at 0.  */
> -  /* DWARF 1 */
> -  .debug          0 : { *(.debug) }
> -  .line           0 : { *(.line) }
> -  /* GNU DWARF 1 extensions */
> -  .debug_srcinfo  0 : { *(.debug_srcinfo) }
> -  .debug_sfnames  0 : { *(.debug_sfnames) }
> -  /* DWARF 1.1 and DWARF 2 */
> -  .debug_aranges  0 : { *(.debug_aranges) }
> -  .debug_pubnames 0 : { *(.debug_pubnames) }
> -  /* DWARF 2 */
> -  .debug_info     0 : { *(.debug_info) }
> -  .debug_abbrev   0 : { *(.debug_abbrev) }
> -  .debug_line     0 : { *(.debug_line) }
> -  .debug_frame    0 : { *(.debug_frame) }
> -  .debug_str      0 : { *(.debug_str) }
> -  .debug_loc      0 : { *(.debug_loc) }
> -  .debug_macinfo  0 : { *(.debug_macinfo) }
> -  /* SGI/MIPS DWARF 2 extensions */
> -  .debug_weaknames 0 : { *(.debug_weaknames) }
> -  .debug_funcnames 0 : { *(.debug_funcnames) }
> -  .debug_typenames 0 : { *(.debug_typenames) }
> -  .debug_varnames  0 : { *(.debug_varnames) }
> -  /* These must appear regardless of  .  */
> -}
> diff --git a/arch/ia64/hp/sim/boot/fw-emu.c b/arch/ia64/hp/sim/boot/fw-emu.c
> deleted file mode 100644
> index 517fb2822e04..000000000000
> --- a/arch/ia64/hp/sim/boot/fw-emu.c
> +++ /dev/null
> @@ -1,374 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * PAL & SAL emulation.
> - *
> - * Copyright (C) 1998-2001 Hewlett-Packard Co
> - *   David Mosberger-Tang <dav...@hpl.hp.com>
> - */
> -
> -#ifdef CONFIG_PCI
> -# include <linux/pci.h>
> -#endif
> -
> -#include <linux/efi.h>
> -#include <asm/io.h>
> -#include <asm/pal.h>
> -#include <asm/sal.h>
> -#include <asm/setup.h>
> -
> -#include "ssc.h"
> -
> -#define MB   (1024*1024UL)
> -
> -#define SIMPLE_MEMMAP        1
> -
> -#if SIMPLE_MEMMAP
> -# define NUM_MEM_DESCS       4
> -#else
> -# define NUM_MEM_DESCS       16
> -#endif
> -
> -static char fw_mem[(  sizeof(struct ia64_boot_param)
> -                 + sizeof(efi_system_table_t)
> -                 + sizeof(efi_runtime_services_t)
> -                 + 1*sizeof(efi_config_table_t)
> -                 + sizeof(struct ia64_sal_systab)
> -                 + sizeof(struct ia64_sal_desc_entry_point)
> -                 + NUM_MEM_DESCS*(sizeof(efi_memory_desc_t))
> -                 + 1024)] __attribute__ ((aligned (8)));
> -
> -#define SECS_PER_HOUR   (60 * 60)
> -#define SECS_PER_DAY    (SECS_PER_HOUR * 24)
> -
> -/* Compute the `struct tm' representation of *T,
> -   offset OFFSET seconds east of UTC,
> -   and store year, yday, mon, mday, wday, hour, min, sec into *TP.
> -   Return nonzero if successful.  */
> -int
> -offtime (unsigned long t, efi_time_t *tp)
> -{
> -     const unsigned short int __mon_yday[2][13] =
> -     {
> -             /* Normal years.  */
> -             { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },
> -             /* Leap years.  */
> -             { 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 }
> -     };
> -     long int days, rem, y;
> -     const unsigned short int *ip;
> -
> -     days = t / SECS_PER_DAY;
> -     rem = t % SECS_PER_DAY;
> -     while (rem < 0) {
> -             rem += SECS_PER_DAY;
> -             --days;
> -     }
> -     while (rem >= SECS_PER_DAY) {
> -             rem -= SECS_PER_DAY;
> -             ++days;
> -     }
> -     tp->hour = rem / SECS_PER_HOUR;
> -     rem %= SECS_PER_HOUR;
> -     tp->minute = rem / 60;
> -     tp->second = rem % 60;
> -     /* January 1, 1970 was a Thursday.  */
> -     y = 1970;
> -
> -#    define DIV(a, b) ((a) / (b) - ((a) % (b) < 0))
> -#    define LEAPS_THRU_END_OF(y) (DIV (y, 4) - DIV (y, 100) + DIV (y, 400))
> -#    define __isleap(year) \
> -       ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
> -
> -     while (days < 0 || days >= (__isleap (y) ? 366 : 365)) {
> -             /* Guess a corrected year, assuming 365 days per year.  */
> -             long int yg = y + days / 365 - (days % 365 < 0);
> -
> -             /* Adjust DAYS and Y to match the guessed year.  */
> -             days -= ((yg - y) * 365 + LEAPS_THRU_END_OF (yg - 1)
> -                      - LEAPS_THRU_END_OF (y - 1));
> -             y = yg;
> -     }
> -     tp->year = y;
> -     ip = __mon_yday[__isleap(y)];
> -     for (y = 11; days < (long int) ip[y]; --y)
> -             continue;
> -     days -= ip[y];
> -     tp->month = y + 1;
> -     tp->day = days + 1;
> -     return 1;
> -}
> -
> -extern void pal_emulator_static (void);
> -
> -/* Macro to emulate SAL call using legacy IN and OUT calls to CF8, CFC etc.. 
> */
> -
> -#define BUILD_CMD(addr)              ((0x80000000 | (addr)) & ~3)
> -
> -#define REG_OFFSET(addr)     (0x00000000000000FF & (addr))
> -#define DEVICE_FUNCTION(addr)        (0x000000000000FF00 & (addr))
> -#define BUS_NUMBER(addr)     (0x0000000000FF0000 & (addr))
> -
> -static efi_status_t
> -fw_efi_get_time (efi_time_t *tm, efi_time_cap_t *tc)
> -{
> -#if defined(CONFIG_IA64_HP_SIM) || defined(CONFIG_IA64_GENERIC)
> -     struct {
> -             int tv_sec;     /* must be 32bits to work */
> -             int tv_usec;
> -     } tv32bits;
> -
> -     ssc((unsigned long) &tv32bits, 0, 0, 0, SSC_GET_TOD);
> -
> -     memset(tm, 0, sizeof(*tm));
> -     offtime(tv32bits.tv_sec, tm);
> -
> -     if (tc)
> -             memset(tc, 0, sizeof(*tc));
> -#else
> -#    error Not implemented yet...
> -#endif
> -     return EFI_SUCCESS;
> -}
> -
> -static void
> -efi_reset_system (int reset_type, efi_status_t status, unsigned long 
> data_size, efi_char16_t *data)
> -{
> -#if defined(CONFIG_IA64_HP_SIM) || defined(CONFIG_IA64_GENERIC)
> -     ssc(status, 0, 0, 0, SSC_EXIT);
> -#else
> -#    error Not implemented yet...
> -#endif
> -}
> -
> -static efi_status_t
> -efi_unimplemented (void)
> -{
> -     return EFI_UNSUPPORTED;
> -}
> -
> -static struct sal_ret_values
> -sal_emulator (long index, unsigned long in1, unsigned long in2,
> -           unsigned long in3, unsigned long in4, unsigned long in5,
> -           unsigned long in6, unsigned long in7)
> -{
> -     long r9  = 0;
> -     long r10 = 0;
> -     long r11 = 0;
> -     long status;
> -
> -     /*
> -      * Don't do a "switch" here since that gives us code that
> -      * isn't self-relocatable.
> -      */
> -     status = 0;
> -     if (index == SAL_FREQ_BASE) {
> -             if (in1 == SAL_FREQ_BASE_PLATFORM)
> -                     r9 = 200000000;
> -             else if (in1 == SAL_FREQ_BASE_INTERVAL_TIMER) {
> -                     /*
> -                      * Is this supposed to be the cr.itc frequency
> -                      * or something platform specific?  The SAL
> -                      * doc ain't exactly clear on this...
> -                      */
> -                     r9 = 700000000;
> -             } else if (in1 == SAL_FREQ_BASE_REALTIME_CLOCK)
> -                     r9 = 1;
> -             else
> -                     status = -1;
> -     } else if (index == SAL_SET_VECTORS) {
> -             ;
> -     } else if (index == SAL_GET_STATE_INFO) {
> -             ;
> -     } else if (index == SAL_GET_STATE_INFO_SIZE) {
> -             ;
> -     } else if (index == SAL_CLEAR_STATE_INFO) {
> -             ;
> -     } else if (index == SAL_MC_RENDEZ) {
> -             ;
> -     } else if (index == SAL_MC_SET_PARAMS) {
> -             ;
> -     } else if (index == SAL_CACHE_FLUSH) {
> -             ;
> -     } else if (index == SAL_CACHE_INIT) {
> -             ;
> -#ifdef CONFIG_PCI
> -     } else if (index == SAL_PCI_CONFIG_READ) {
> -             /*
> -              * in1 contains the PCI configuration address and in2
> -              * the size of the read.  The value that is read is
> -              * returned via the general register r9.
> -              */
> -                outl(BUILD_CMD(in1), 0xCF8);
> -                if (in2 == 1)                           /* Reading byte  */
> -                        r9 = inb(0xCFC + ((REG_OFFSET(in1) & 3)));
> -                else if (in2 == 2)                      /* Reading word  */
> -                        r9 = inw(0xCFC + ((REG_OFFSET(in1) & 2)));
> -                else                                    /* Reading dword */
> -                        r9 = inl(0xCFC);
> -                status = PCIBIOS_SUCCESSFUL;
> -     } else if (index == SAL_PCI_CONFIG_WRITE) {
> -             /*
> -              * in1 contains the PCI configuration address, in2 the
> -              * size of the write, and in3 the actual value to be
> -              * written out.
> -              */
> -                outl(BUILD_CMD(in1), 0xCF8);
> -                if (in2 == 1)                           /* Writing byte  */
> -                        outb(in3, 0xCFC + ((REG_OFFSET(in1) & 3)));
> -                else if (in2 == 2)                      /* Writing word  */
> -                        outw(in3, 0xCFC + ((REG_OFFSET(in1) & 2)));
> -                else                                    /* Writing dword */
> -                        outl(in3, 0xCFC);
> -                status = PCIBIOS_SUCCESSFUL;
> -#endif /* CONFIG_PCI */
> -     } else if (index == SAL_UPDATE_PAL) {
> -             ;
> -     } else {
> -             status = -1;
> -     }
> -     return ((struct sal_ret_values) {status, r9, r10, r11});
> -}
> -
> -struct ia64_boot_param *
> -sys_fw_init (const char *args, int arglen)
> -{
> -     efi_system_table_t *efi_systab;
> -     efi_runtime_services_t *efi_runtime;
> -     efi_config_table_t *efi_tables;
> -     struct ia64_sal_systab *sal_systab;
> -     efi_memory_desc_t *efi_memmap, *md;
> -     unsigned long *pal_desc, *sal_desc;
> -     struct ia64_sal_desc_entry_point *sal_ed;
> -     struct ia64_boot_param *bp;
> -     unsigned char checksum = 0;
> -     char *cp, *cmd_line;
> -     int i = 0;
> -#    define MAKE_MD(typ, attr, start, end)           \
> -     do {                                            \
> -             md = efi_memmap + i++;                  \
> -             md->type = typ;                         \
> -             md->pad = 0;                            \
> -             md->phys_addr = start;                  \
> -             md->virt_addr = 0;                      \
> -             md->num_pages = (end - start) >> 12;    \
> -             md->attribute = attr;                   \
> -     } while (0)
> -
> -     memset(fw_mem, 0, sizeof(fw_mem));
> -
> -     pal_desc = (unsigned long *) &pal_emulator_static;
> -     sal_desc = (unsigned long *) &sal_emulator;
> -
> -     cp = fw_mem;
> -     efi_systab  = (void *) cp; cp += sizeof(*efi_systab);
> -     efi_runtime = (void *) cp; cp += sizeof(*efi_runtime);
> -     efi_tables  = (void *) cp; cp += sizeof(*efi_tables);
> -     sal_systab  = (void *) cp; cp += sizeof(*sal_systab);
> -     sal_ed      = (void *) cp; cp += sizeof(*sal_ed);
> -     efi_memmap  = (void *) cp; cp += NUM_MEM_DESCS*sizeof(*efi_memmap);
> -     bp          = (void *) cp; cp += sizeof(*bp);
> -     cmd_line    = (void *) cp;
> -
> -     if (args) {
> -             if (arglen >= 1024)
> -                     arglen = 1023;
> -             memcpy(cmd_line, args, arglen);
> -     } else {
> -             arglen = 0;
> -     }
> -     cmd_line[arglen] = '\0';
> -
> -     memset(efi_systab, 0, sizeof(*efi_systab));
> -     efi_systab->hdr.signature = EFI_SYSTEM_TABLE_SIGNATURE;
> -     efi_systab->hdr.revision  = ((1 << 16) | 00);
> -     efi_systab->hdr.headersize = sizeof(efi_systab->hdr);
> -     efi_systab->fw_vendor = 
> __pa("H\0e\0w\0l\0e\0t\0t\0-\0P\0a\0c\0k\0a\0r\0d\0\0");
> -     efi_systab->fw_revision = 1;
> -     efi_systab->runtime = (void *) __pa(efi_runtime);
> -     efi_systab->nr_tables = 1;
> -     efi_systab->tables = __pa(efi_tables);
> -
> -     efi_runtime->hdr.signature = EFI_RUNTIME_SERVICES_SIGNATURE;
> -     efi_runtime->hdr.revision = EFI_RUNTIME_SERVICES_REVISION;
> -     efi_runtime->hdr.headersize = sizeof(efi_runtime->hdr);
> -     efi_runtime->get_time = (void *)__pa(&fw_efi_get_time);
> -     efi_runtime->set_time = (void *)__pa(&efi_unimplemented);
> -     efi_runtime->get_wakeup_time = (void *)__pa(&efi_unimplemented);
> -     efi_runtime->set_wakeup_time = (void *)__pa(&efi_unimplemented);
> -     efi_runtime->set_virtual_address_map = (void *)__pa(&efi_unimplemented);
> -     efi_runtime->get_variable = (void *)__pa(&efi_unimplemented);
> -     efi_runtime->get_next_variable = (void *)__pa(&efi_unimplemented);
> -     efi_runtime->set_variable = (void *)__pa(&efi_unimplemented);
> -     efi_runtime->get_next_high_mono_count = (void 
> *)__pa(&efi_unimplemented);
> -     efi_runtime->reset_system = (void *)__pa(&efi_reset_system);
> -
> -     efi_tables->guid = SAL_SYSTEM_TABLE_GUID;
> -     efi_tables->table = __pa(sal_systab);
> -
> -     /* fill in the SAL system table: */
> -     memcpy(sal_systab->signature, "SST_", 4);
> -     sal_systab->size = sizeof(*sal_systab);
> -     sal_systab->sal_rev_minor = 1;
> -     sal_systab->sal_rev_major = 0;
> -     sal_systab->entry_count = 1;
> -
> -#ifdef CONFIG_IA64_GENERIC
> -        strcpy(sal_systab->oem_id, "Generic");
> -        strcpy(sal_systab->product_id, "IA-64 system");
> -#endif
> -
> -#ifdef CONFIG_IA64_HP_SIM
> -     strcpy(sal_systab->oem_id, "Hewlett-Packard");
> -     strcpy(sal_systab->product_id, "HP-simulator");
> -#endif
> -
> -     /* fill in an entry point: */
> -     sal_ed->type = SAL_DESC_ENTRY_POINT;
> -     sal_ed->pal_proc = __pa(pal_desc[0]);
> -     sal_ed->sal_proc = __pa(sal_desc[0]);
> -     sal_ed->gp = __pa(sal_desc[1]);
> -
> -     for (cp = (char *) sal_systab; cp < (char *) efi_memmap; ++cp)
> -             checksum += *cp;
> -
> -     sal_systab->checksum = -checksum;
> -
> -#if SIMPLE_MEMMAP
> -     /* simulate free memory at physical address zero */
> -     MAKE_MD(EFI_BOOT_SERVICES_DATA,         EFI_MEMORY_WB,    0*MB,    
> 1*MB);
> -     MAKE_MD(EFI_PAL_CODE,                   EFI_MEMORY_WB,    1*MB,    
> 2*MB);
> -     MAKE_MD(EFI_CONVENTIONAL_MEMORY,        EFI_MEMORY_WB,    2*MB,  
> 130*MB);
> -     MAKE_MD(EFI_CONVENTIONAL_MEMORY,        EFI_MEMORY_WB, 4096*MB, 
> 4128*MB);
> -#else
> -     MAKE_MD( 4,                0x9, 0x0000000000000000, 0x0000000000001000);
> -     MAKE_MD( 7,                0x9, 0x0000000000001000, 0x000000000008a000);
> -     MAKE_MD( 4,                0x9, 0x000000000008a000, 0x00000000000a0000);
> -     MAKE_MD( 5, 0x8000000000000009, 0x00000000000c0000, 0x0000000000100000);
> -     MAKE_MD( 7,                0x9, 0x0000000000100000, 0x0000000004400000);
> -     MAKE_MD( 2,                0x9, 0x0000000004400000, 0x0000000004be5000);
> -     MAKE_MD( 7,                0x9, 0x0000000004be5000, 0x000000007f77e000);
> -     MAKE_MD( 6, 0x8000000000000009, 0x000000007f77e000, 0x000000007fb94000);
> -     MAKE_MD( 6, 0x8000000000000009, 0x000000007fb94000, 0x000000007fb95000);
> -     MAKE_MD( 6, 0x8000000000000009, 0x000000007fb95000, 0x000000007fc00000);
> -     MAKE_MD(13, 0x8000000000000009, 0x000000007fc00000, 0x000000007fc3a000);
> -     MAKE_MD( 7,                0x9, 0x000000007fc3a000, 0x000000007fea0000);
> -     MAKE_MD( 5, 0x8000000000000009, 0x000000007fea0000, 0x000000007fea8000);
> -     MAKE_MD( 7,                0x9, 0x000000007fea8000, 0x000000007feab000);
> -     MAKE_MD( 5, 0x8000000000000009, 0x000000007feab000, 0x000000007ffff000);
> -     MAKE_MD( 7,                0x9, 0x00000000ff400000, 0x0000000104000000);
> -#endif
> -
> -     bp->efi_systab = __pa(&fw_mem);
> -     bp->efi_memmap = __pa(efi_memmap);
> -     bp->efi_memmap_size = NUM_MEM_DESCS*sizeof(efi_memory_desc_t);
> -     bp->efi_memdesc_size = sizeof(efi_memory_desc_t);
> -     bp->efi_memdesc_version = 1;
> -     bp->command_line = __pa(cmd_line);
> -     bp->console_info.num_cols = 80;
> -     bp->console_info.num_rows = 25;
> -     bp->console_info.orig_x = 0;
> -     bp->console_info.orig_y = 24;
> -     bp->fpswa = 0;
> -
> -     return bp;
> -}
> diff --git a/arch/ia64/hp/sim/boot/ssc.h b/arch/ia64/hp/sim/boot/ssc.h
> deleted file mode 100644
> index 88752c7509e0..000000000000
> --- a/arch/ia64/hp/sim/boot/ssc.h
> +++ /dev/null
> @@ -1,36 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -/*
> - * Copyright (C) 1998-2003 Hewlett-Packard Co
> - *   David Mosberger-Tang <dav...@hpl.hp.com>
> - *   Stephane Eranian <eran...@hpl.hp.com>
> - */
> -#ifndef ssc_h
> -#define ssc_h
> -
> -/* Simulator system calls: */
> -
> -#define SSC_CONSOLE_INIT             20
> -#define SSC_GETCHAR                  21
> -#define SSC_PUTCHAR                  31
> -#define SSC_OPEN                     50
> -#define SSC_CLOSE                    51
> -#define SSC_READ                     52
> -#define SSC_WRITE                    53
> -#define SSC_GET_COMPLETION           54
> -#define SSC_WAIT_COMPLETION          55
> -#define SSC_CONNECT_INTERRUPT                58
> -#define SSC_GENERATE_INTERRUPT               59
> -#define SSC_SET_PERIODIC_INTERRUPT   60
> -#define SSC_GET_RTC                  65
> -#define SSC_EXIT                     66
> -#define SSC_LOAD_SYMBOLS             69
> -#define SSC_GET_TOD                  74
> -
> -#define SSC_GET_ARGS                 75
> -
> -/*
> - * Simulator system call.
> - */
> -extern long ssc (long arg0, long arg1, long arg2, long arg3, int nr);
> -
> -#endif /* ssc_h */
> diff --git a/arch/ia64/hp/sim/hpsim.S b/arch/ia64/hp/sim/hpsim.S
> deleted file mode 100644
> index 44b4d53e1689..000000000000
> --- a/arch/ia64/hp/sim/hpsim.S
> +++ /dev/null
> @@ -1,11 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -#include <asm/asmmacro.h>
> -
> -/*
> - * Simulator system call.
> - */
> -GLOBAL_ENTRY(ia64_ssc)
> -     mov r15=r36
> -     break 0x80001
> -     br.ret.sptk.many rp
> -END(ia64_ssc)
> diff --git a/arch/ia64/hp/sim/hpsim_console.c 
> b/arch/ia64/hp/sim/hpsim_console.c
> deleted file mode 100644
> index bffd9f67a8a1..000000000000
> --- a/arch/ia64/hp/sim/hpsim_console.c
> +++ /dev/null
> @@ -1,77 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * Platform dependent support for HP simulator.
> - *
> - * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co
> - *   David Mosberger-Tang <dav...@hpl.hp.com>
> - * Copyright (C) 1999 Vijay Chander <vi...@engr.sgi.com>
> - */
> -
> -#include <linux/init.h>
> -#include <linux/kernel.h>
> -#include <linux/param.h>
> -#include <linux/string.h>
> -#include <linux/types.h>
> -#include <linux/tty.h>
> -#include <linux/kdev_t.h>
> -#include <linux/console.h>
> -
> -#include <asm/delay.h>
> -#include <asm/irq.h>
> -#include <asm/pal.h>
> -#include <asm/machvec.h>
> -#include <asm/pgtable.h>
> -#include <asm/sal.h>
> -#include <asm/hpsim.h>
> -
> -#include "hpsim_ssc.h"
> -
> -static int simcons_init (struct console *, char *);
> -static void simcons_write (struct console *, const char *, unsigned);
> -static struct tty_driver *simcons_console_device (struct console *, int *);
> -
> -static struct console hpsim_cons = {
> -     .name =         "simcons",
> -     .write =        simcons_write,
> -     .device =       simcons_console_device,
> -     .setup =        simcons_init,
> -     .flags =        CON_PRINTBUFFER,
> -     .index =        -1,
> -};
> -
> -static int
> -simcons_init (struct console *cons, char *options)
> -{
> -     return 0;
> -}
> -
> -static void
> -simcons_write (struct console *cons, const char *buf, unsigned count)
> -{
> -     unsigned long ch;
> -
> -     while (count-- > 0) {
> -             ch = *buf++;
> -             ia64_ssc(ch, 0, 0, 0, SSC_PUTCHAR);
> -             if (ch == '\n')
> -               ia64_ssc('\r', 0, 0, 0, SSC_PUTCHAR);
> -     }
> -}
> -
> -static struct tty_driver *simcons_console_device (struct console *c, int 
> *index)
> -{
> -     *index = c->index;
> -     return hp_simserial_driver;
> -}
> -
> -int simcons_register(void)
> -{
> -     if (!ia64_platform_is("hpsim"))
> -             return 1;
> -
> -     if (hpsim_cons.flags & CON_ENABLED)
> -             return 1;
> -
> -     register_console(&hpsim_cons);
> -     return 0;
> -}
> diff --git a/arch/ia64/hp/sim/hpsim_irq.c b/arch/ia64/hp/sim/hpsim_irq.c
> deleted file mode 100644
> index 2f1cc59650ab..000000000000
> --- a/arch/ia64/hp/sim/hpsim_irq.c
> +++ /dev/null
> @@ -1,76 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * Platform dependent support for HP simulator.
> - *
> - * Copyright (C) 1998-2001 Hewlett-Packard Co
> - * Copyright (C) 1998-2001 David Mosberger-Tang <dav...@hpl.hp.com>
> - */
> -
> -#include <linux/init.h>
> -#include <linux/kernel.h>
> -#include <linux/sched.h>
> -#include <linux/irq.h>
> -
> -#include "hpsim_ssc.h"
> -
> -static unsigned int
> -hpsim_irq_startup(struct irq_data *data)
> -{
> -     return 0;
> -}
> -
> -static void
> -hpsim_irq_noop(struct irq_data *data)
> -{
> -}
> -
> -static int
> -hpsim_set_affinity_noop(struct irq_data *d, const struct cpumask *b, bool f)
> -{
> -     return 0;
> -}
> -
> -static struct irq_chip irq_type_hp_sim = {
> -     .name =                 "hpsim",
> -     .irq_startup =          hpsim_irq_startup,
> -     .irq_shutdown =         hpsim_irq_noop,
> -     .irq_enable =           hpsim_irq_noop,
> -     .irq_disable =          hpsim_irq_noop,
> -     .irq_ack =              hpsim_irq_noop,
> -     .irq_set_affinity =     hpsim_set_affinity_noop,
> -};
> -
> -static void hpsim_irq_set_chip(int irq)
> -{
> -     struct irq_chip *chip = irq_get_chip(irq);
> -
> -     if (chip == &no_irq_chip)
> -             irq_set_chip(irq, &irq_type_hp_sim);
> -}
> -
> -static void hpsim_connect_irq(int intr, int irq)
> -{
> -     ia64_ssc(intr, irq, 0, 0, SSC_CONNECT_INTERRUPT);
> -}
> -
> -int hpsim_get_irq(int intr)
> -{
> -     int irq = assign_irq_vector(AUTO_ASSIGN);
> -
> -     if (irq >= 0) {
> -             hpsim_irq_set_chip(irq);
> -             irq_set_handler(irq, handle_simple_irq);
> -             hpsim_connect_irq(intr, irq);
> -     }
> -
> -     return irq;
> -}
> -
> -void __init
> -hpsim_irq_init (void)
> -{
> -     int i;
> -
> -     for_each_active_irq(i)
> -             hpsim_irq_set_chip(i);
> -}
> diff --git a/arch/ia64/hp/sim/hpsim_machvec.c 
> b/arch/ia64/hp/sim/hpsim_machvec.c
> deleted file mode 100644
> index c21419359185..000000000000
> --- a/arch/ia64/hp/sim/hpsim_machvec.c
> +++ /dev/null
> @@ -1,3 +0,0 @@
> -#define MACHVEC_PLATFORM_NAME                hpsim
> -#define MACHVEC_PLATFORM_HEADER              <asm/machvec_hpsim.h>
> -#include <asm/machvec_init.h>
> diff --git a/arch/ia64/hp/sim/hpsim_setup.c b/arch/ia64/hp/sim/hpsim_setup.c
> deleted file mode 100644
> index 41d21d51dc4d..000000000000
> --- a/arch/ia64/hp/sim/hpsim_setup.c
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * Platform dependent support for HP simulator.
> - *
> - * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co
> - *   David Mosberger-Tang <dav...@hpl.hp.com>
> - * Copyright (C) 1999 Vijay Chander <vi...@engr.sgi.com>
> - */
> -#include <linux/console.h>
> -#include <linux/init.h>
> -#include <linux/kdev_t.h>
> -#include <linux/kernel.h>
> -#include <linux/major.h>
> -#include <linux/param.h>
> -#include <linux/root_dev.h>
> -#include <linux/string.h>
> -#include <linux/types.h>
> -
> -#include <asm/delay.h>
> -#include <asm/irq.h>
> -#include <asm/pal.h>
> -#include <asm/machvec.h>
> -#include <asm/pgtable.h>
> -#include <asm/sal.h>
> -#include <asm/hpsim.h>
> -
> -#include "hpsim_ssc.h"
> -
> -void
> -ia64_ctl_trace (long on)
> -{
> -     ia64_ssc(on, 0, 0, 0, SSC_CTL_TRACE);
> -}
> -
> -void __init
> -hpsim_setup (char **cmdline_p)
> -{
> -     ROOT_DEV = Root_SDA1;           /* default to first SCSI drive */
> -
> -     simcons_register();
> -}
> diff --git a/arch/ia64/hp/sim/hpsim_ssc.h b/arch/ia64/hp/sim/hpsim_ssc.h
> deleted file mode 100644
> index 6fd97a487811..000000000000
> --- a/arch/ia64/hp/sim/hpsim_ssc.h
> +++ /dev/null
> @@ -1,37 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -/*
> - * Platform dependent support for HP simulator.
> - *
> - * Copyright (C) 1998, 1999 Hewlett-Packard Co
> - * Copyright (C) 1998, 1999 David Mosberger-Tang <dav...@hpl.hp.com>
> - * Copyright (C) 1999 Vijay Chander <vi...@engr.sgi.com>
> - */
> -#ifndef _IA64_PLATFORM_HPSIM_SSC_H
> -#define _IA64_PLATFORM_HPSIM_SSC_H
> -
> -/* Simulator system calls: */
> -
> -#define SSC_CONSOLE_INIT             20
> -#define SSC_GETCHAR                  21
> -#define SSC_PUTCHAR                  31
> -#define SSC_CONNECT_INTERRUPT                58
> -#define SSC_GENERATE_INTERRUPT               59
> -#define SSC_SET_PERIODIC_INTERRUPT   60
> -#define SSC_GET_RTC                  65
> -#define SSC_EXIT                     66
> -#define SSC_LOAD_SYMBOLS             69
> -#define SSC_GET_TOD                  74
> -#define SSC_CTL_TRACE                        76
> -
> -#define SSC_NETDEV_PROBE             100
> -#define SSC_NETDEV_SEND                      101
> -#define SSC_NETDEV_RECV                      102
> -#define SSC_NETDEV_ATTACH            103
> -#define SSC_NETDEV_DETACH            104
> -
> -/*
> - * Simulator system call.
> - */
> -extern long ia64_ssc (long arg0, long arg1, long arg2, long arg3, int nr);
> -
> -#endif /* _IA64_PLATFORM_HPSIM_SSC_H */
> diff --git a/arch/ia64/hp/sim/simeth.c b/arch/ia64/hp/sim/simeth.c
> deleted file mode 100644
> index f39ef2b4ed72..000000000000
> --- a/arch/ia64/hp/sim/simeth.c
> +++ /dev/null
> @@ -1,510 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * Simulated Ethernet Driver
> - *
> - * Copyright (C) 1999-2001, 2003 Hewlett-Packard Co
> - *   Stephane Eranian <eran...@hpl.hp.com>
> - */
> -#include <linux/kernel.h>
> -#include <linux/sched.h>
> -#include <linux/types.h>
> -#include <linux/in.h>
> -#include <linux/string.h>
> -#include <linux/init.h>
> -#include <linux/errno.h>
> -#include <linux/interrupt.h>
> -#include <linux/netdevice.h>
> -#include <linux/etherdevice.h>
> -#include <linux/inetdevice.h>
> -#include <linux/if_ether.h>
> -#include <linux/if_arp.h>
> -#include <linux/skbuff.h>
> -#include <linux/notifier.h>
> -#include <linux/bitops.h>
> -#include <asm/irq.h>
> -#include <asm/hpsim.h>
> -
> -#include "hpsim_ssc.h"
> -
> -#define SIMETH_RECV_MAX      10
> -
> -/*
> - * Maximum possible received frame for Ethernet.
> - * We preallocate an sk_buff of that size to avoid costly
> - * memcpy for temporary buffer into sk_buff. We do basically
> - * what's done in other drivers, like eepro with a ring.
> - * The difference is, of course, that we don't have real DMA !!!
> - */
> -#define SIMETH_FRAME_SIZE    ETH_FRAME_LEN
> -
> -
> -#define NETWORK_INTR                 8
> -
> -struct simeth_local {
> -     struct net_device_stats stats;
> -     int                     simfd;   /* descriptor in the simulator */
> -};
> -
> -static int simeth_probe1(void);
> -static int simeth_open(struct net_device *dev);
> -static int simeth_close(struct net_device *dev);
> -static int simeth_tx(struct sk_buff *skb, struct net_device *dev);
> -static int simeth_rx(struct net_device *dev);
> -static struct net_device_stats *simeth_get_stats(struct net_device *dev);
> -static irqreturn_t simeth_interrupt(int irq, void *dev_id);
> -static void set_multicast_list(struct net_device *dev);
> -static int simeth_device_event(struct notifier_block *this,unsigned long 
> event, void *ptr);
> -
> -static char *simeth_version="0.3";
> -
> -/*
> - * This variable is used to establish a mapping between the Linux/ia64 kernel
> - * and the host linux kernel.
> - *
> - * As of today, we support only one card, even though most of the code
> - * is ready for many more. The mapping is then:
> - *   linux/ia64 -> linux/x86
> - *      eth0    -> eth1
> - *
> - * In the future, we some string operations, we could easily support up
> - * to 10 cards (0-9).
> - *
> - * The default mapping can be changed on the kernel command line by
> - * specifying simeth=ethX (or whatever string you want).
> - */
> -static char *simeth_device="eth0";    /* default host interface to use */
> -
> -
> -
> -static volatile unsigned int card_count; /* how many cards "found" so far */
> -static int simeth_debug;             /* set to 1 to get debug information */
> -
> -/*
> - * Used to catch IFF_UP & IFF_DOWN events
> - */
> -static struct notifier_block simeth_dev_notifier = {
> -     simeth_device_event,
> -     NULL
> -};
> -
> -
> -/*
> - * Function used when using a kernel command line option.
> - *
> - * Format: simeth=interface_name (like eth0)
> - */
> -static int __init
> -simeth_setup(char *str)
> -{
> -     simeth_device = str;
> -     return 1;
> -}
> -
> -__setup("simeth=", simeth_setup);
> -
> -/*
> - * Function used to probe for simeth devices when not installed
> - * as a loadable module
> - */
> -
> -int __init
> -simeth_probe (void)
> -{
> -     int r;
> -
> -     printk(KERN_INFO "simeth: v%s\n", simeth_version);
> -
> -     r = simeth_probe1();
> -
> -     if (r == 0) register_netdevice_notifier(&simeth_dev_notifier);
> -
> -     return r;
> -}
> -
> -static inline int
> -netdev_probe(char *name, unsigned char *ether)
> -{
> -     return ia64_ssc(__pa(name), __pa(ether), 0,0, SSC_NETDEV_PROBE);
> -}
> -
> -
> -static inline int
> -netdev_attach(int fd, int irq, unsigned int ipaddr)
> -{
> -     /* this puts the host interface in the right mode (start interrupting) 
> */
> -     return ia64_ssc(fd, ipaddr, 0,0, SSC_NETDEV_ATTACH);
> -}
> -
> -
> -static inline int
> -netdev_detach(int fd)
> -{
> -     /*
> -      * inactivate the host interface (don't interrupt anymore) */
> -     return ia64_ssc(fd, 0,0,0, SSC_NETDEV_DETACH);
> -}
> -
> -static inline int
> -netdev_send(int fd, unsigned char *buf, unsigned int len)
> -{
> -     return ia64_ssc(fd, __pa(buf), len, 0, SSC_NETDEV_SEND);
> -}
> -
> -static inline int
> -netdev_read(int fd, unsigned char *buf, unsigned int len)
> -{
> -     return ia64_ssc(fd, __pa(buf), len, 0, SSC_NETDEV_RECV);
> -}
> -
> -static const struct net_device_ops simeth_netdev_ops = {
> -     .ndo_open               = simeth_open,
> -     .ndo_stop               = simeth_close,
> -     .ndo_start_xmit         = simeth_tx,
> -     .ndo_get_stats          = simeth_get_stats,
> -     .ndo_set_rx_mode        = set_multicast_list, /* not yet used */
> -
> -};
> -
> -/*
> - * Function shared with module code, so cannot be in init section
> - *
> - * So far this function "detects" only one card (test_&_set) but could
> - * be extended easily.
> - *
> - * Return:
> - *   - -ENODEV is no device found
> - *   - -ENOMEM is no more memory
> - *   - 0 otherwise
> - */
> -static int
> -simeth_probe1(void)
> -{
> -     unsigned char mac_addr[ETH_ALEN];
> -     struct simeth_local *local;
> -     struct net_device *dev;
> -     int fd, err, rc;
> -
> -     /*
> -      * XXX Fix me
> -      * let's support just one card for now
> -      */
> -     if (test_and_set_bit(0, &card_count))
> -             return -ENODEV;
> -
> -     /*
> -      * check with the simulator for the device
> -      */
> -     fd = netdev_probe(simeth_device, mac_addr);
> -     if (fd == -1)
> -             return -ENODEV;
> -
> -     dev = alloc_etherdev(sizeof(struct simeth_local));
> -     if (!dev)
> -             return -ENOMEM;
> -
> -     memcpy(dev->dev_addr, mac_addr, sizeof(mac_addr));
> -
> -     local = netdev_priv(dev);
> -     local->simfd = fd; /* keep track of underlying file descriptor */
> -
> -     dev->netdev_ops = &simeth_netdev_ops;
> -
> -     err = register_netdev(dev);
> -     if (err) {
> -             free_netdev(dev);
> -             return err;
> -     }
> -
> -     /*
> -      * attach the interrupt in the simulator, this does enable interrupts
> -      * until a netdev_attach() is called
> -      */
> -     if ((rc = hpsim_get_irq(NETWORK_INTR)) < 0)
> -             panic("%s: out of interrupt vectors!\n", __func__);
> -     dev->irq = rc;
> -
> -     printk(KERN_INFO "%s: hosteth=%s simfd=%d, HwAddr=%pm, IRQ %d\n",
> -            dev->name, simeth_device, local->simfd, dev->dev_addr, dev->irq);
> -
> -     return 0;
> -}
> -
> -/*
> - * actually binds the device to an interrupt vector
> - */
> -static int
> -simeth_open(struct net_device *dev)
> -{
> -     if (request_irq(dev->irq, simeth_interrupt, 0, "simeth", dev)) {
> -             printk(KERN_WARNING "simeth: unable to get IRQ %d.\n", 
> dev->irq);
> -             return -EAGAIN;
> -     }
> -
> -     netif_start_queue(dev);
> -
> -     return 0;
> -}
> -
> -/* copied from lapbether.c */
> -static __inline__ int dev_is_ethdev(struct net_device *dev)
> -{
> -       return ( dev->type == ARPHRD_ETHER && strncmp(dev->name, "dummy", 5));
> -}
> -
> -
> -/*
> - * Handler for IFF_UP or IFF_DOWN
> - *
> - * The reason for that is that we don't want to be interrupted when the
> - * interface is down. There is no way to unconnect in the simualtor. Instead
> - * we use this function to shutdown packet processing in the frame filter
> - * in the simulator. Thus no interrupts are generated
> - *
> - *
> - * That's also the place where we pass the IP address of this device to the
> - * simulator so that that we can start filtering packets for it
> - *
> - * There may be a better way of doing this, but I don't know which yet.
> - */
> -static int
> -simeth_device_event(struct notifier_block *this,unsigned long event, void 
> *ptr)
> -{
> -     struct net_device *dev = netdev_notifier_info_to_dev(ptr);
> -     struct simeth_local *local;
> -     struct in_device *in_dev;
> -     struct in_ifaddr **ifap = NULL;
> -     struct in_ifaddr *ifa = NULL;
> -     int r;
> -
> -
> -     if ( ! dev ) {
> -             printk(KERN_WARNING "simeth_device_event dev=0\n");
> -             return NOTIFY_DONE;
> -     }
> -
> -     if (dev_net(dev) != &init_net)
> -             return NOTIFY_DONE;
> -
> -     if ( event != NETDEV_UP && event != NETDEV_DOWN ) return NOTIFY_DONE;
> -
> -     /*
> -      * Check whether or not it's for an ethernet device
> -      *
> -      * XXX Fixme: This works only as long as we support one
> -      * type of ethernet device.
> -      */
> -     if ( !dev_is_ethdev(dev) ) return NOTIFY_DONE;
> -
> -     if ((in_dev=dev->ip_ptr) != NULL) {
> -             for (ifap=&in_dev->ifa_list; (ifa=*ifap) != NULL; 
> ifap=&ifa->ifa_next)
> -                     if (strcmp(dev->name, ifa->ifa_label) == 0) break;
> -     }
> -     if ( ifa == NULL ) {
> -             printk(KERN_ERR "simeth_open: can't find device %s's ifa\n", 
> dev->name);
> -             return NOTIFY_DONE;
> -     }
> -
> -     printk(KERN_INFO "simeth_device_event: %s ipaddr=0x%x\n",
> -            dev->name, ntohl(ifa->ifa_local));
> -
> -     /*
> -      * XXX Fix me
> -      * if the device was up, and we're simply reconfiguring it, not sure
> -      * we get DOWN then UP.
> -      */
> -
> -     local = netdev_priv(dev);
> -     /* now do it for real */
> -     r = event == NETDEV_UP ?
> -             netdev_attach(local->simfd, dev->irq, ntohl(ifa->ifa_local)):
> -             netdev_detach(local->simfd);
> -
> -     printk(KERN_INFO "simeth: netdev_attach/detach: event=%s ->%d\n",
> -            event == NETDEV_UP ? "attach":"detach", r);
> -
> -     return NOTIFY_DONE;
> -}
> -
> -static int
> -simeth_close(struct net_device *dev)
> -{
> -     netif_stop_queue(dev);
> -
> -     free_irq(dev->irq, dev);
> -
> -     return 0;
> -}
> -
> -/*
> - * Only used for debug
> - */
> -static void
> -frame_print(unsigned char *from, unsigned char *frame, int len)
> -{
> -     int i;
> -
> -     printk("%s: (%d) %02x", from, len, frame[0] & 0xff);
> -     for(i=1; i < 6; i++ ) {
> -             printk(":%02x", frame[i] &0xff);
> -     }
> -     printk(" %2x", frame[6] &0xff);
> -     for(i=7; i < 12; i++ ) {
> -             printk(":%02x", frame[i] &0xff);
> -     }
> -     printk(" [%02x%02x]\n", frame[12], frame[13]);
> -
> -     for(i=14; i < len; i++ ) {
> -             printk("%02x ", frame[i] &0xff);
> -             if ( (i%10)==0) printk("\n");
> -     }
> -     printk("\n");
> -}
> -
> -
> -/*
> - * Function used to transmit of frame, very last one on the path before
> - * going to the simulator.
> - */
> -static int
> -simeth_tx(struct sk_buff *skb, struct net_device *dev)
> -{
> -     struct simeth_local *local = netdev_priv(dev);
> -
> -#if 0
> -     /* ensure we have at least ETH_ZLEN bytes (min frame size) */
> -     unsigned int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
> -     /* Where do the extra padding bytes comes from inthe skbuff ? */
> -#else
> -     /* the real driver in the host system is going to take care of that
> -      * or maybe it's the NIC itself.
> -      */
> -     unsigned int length = skb->len;
> -#endif
> -
> -     local->stats.tx_bytes += skb->len;
> -     local->stats.tx_packets++;
> -
> -
> -     if (simeth_debug > 5) frame_print("simeth_tx", skb->data, length);
> -
> -     netdev_send(local->simfd, skb->data, length);
> -
> -     /*
> -      * we are synchronous on write, so we don't simulate a
> -      * trasnmit complete interrupt, thus we don't need to arm a tx
> -      */
> -
> -     dev_kfree_skb(skb);
> -     return NETDEV_TX_OK;
> -}
> -
> -static inline struct sk_buff *
> -make_new_skb(struct net_device *dev)
> -{
> -     struct sk_buff *nskb;
> -
> -     /*
> -      * The +2 is used to make sure that the IP header is nicely
> -      * aligned (on 4byte boundary I assume 14+2=16)
> -      */
> -     nskb = dev_alloc_skb(SIMETH_FRAME_SIZE + 2);
> -     if ( nskb == NULL ) {
> -             printk(KERN_NOTICE "%s: memory squeeze. dropping packet.\n", 
> dev->name);
> -             return NULL;
> -     }
> -
> -     skb_reserve(nskb, 2);   /* Align IP on 16 byte boundaries */
> -
> -     skb_put(nskb,SIMETH_FRAME_SIZE);
> -
> -     return nskb;
> -}
> -
> -/*
> - * called from interrupt handler to process a received frame
> - */
> -static int
> -simeth_rx(struct net_device *dev)
> -{
> -     struct simeth_local     *local;
> -     struct sk_buff          *skb;
> -     int                     len;
> -     int                     rcv_count = SIMETH_RECV_MAX;
> -
> -     local = netdev_priv(dev);
> -     /*
> -      * the loop concept has been borrowed from other drivers
> -      * looks to me like it's a throttling thing to avoid pushing to many
> -      * packets at one time into the stack. Making sure we can process them
> -      * upstream and make forward progress overall
> -      */
> -     do {
> -             if ( (skb=make_new_skb(dev)) == NULL ) {
> -                     printk(KERN_NOTICE "%s: memory squeeze. dropping 
> packet.\n", dev->name);
> -                     local->stats.rx_dropped++;
> -                     return 0;
> -             }
> -             /*
> -              * Read only one frame at a time
> -              */
> -             len = netdev_read(local->simfd, skb->data, SIMETH_FRAME_SIZE);
> -             if ( len == 0 ) {
> -                     if ( simeth_debug > 0 ) printk(KERN_WARNING "%s: 
> count=%d netdev_read=0\n",
> -                                                    dev->name, 
> SIMETH_RECV_MAX-rcv_count);
> -                     break;
> -             }
> -#if 0
> -             /*
> -              * XXX Fix me
> -              * Should really do a csum+copy here
> -              */
> -             skb_copy_to_linear_data(skb, frame, len);
> -#endif
> -             skb->protocol = eth_type_trans(skb, dev);
> -
> -             if ( simeth_debug > 6 ) frame_print("simeth_rx", skb->data, 
> len);
> -
> -             /*
> -              * push the packet up & trigger software interrupt
> -              */
> -             netif_rx(skb);
> -
> -             local->stats.rx_packets++;
> -             local->stats.rx_bytes += len;
> -
> -     } while ( --rcv_count );
> -
> -     return len; /* 0 = nothing left to read, otherwise, we can try again */
> -}
> -
> -/*
> - * Interrupt handler (Yes, we can do it too !!!)
> - */
> -static irqreturn_t
> -simeth_interrupt(int irq, void *dev_id)
> -{
> -     struct net_device *dev = dev_id;
> -
> -     /*
> -      * very simple loop because we get interrupts only when receiving
> -      */
> -     while (simeth_rx(dev));
> -     return IRQ_HANDLED;
> -}
> -
> -static struct net_device_stats *
> -simeth_get_stats(struct net_device *dev)
> -{
> -     struct simeth_local *local = netdev_priv(dev);
> -
> -     return &local->stats;
> -}
> -
> -/* fake multicast ability */
> -static void
> -set_multicast_list(struct net_device *dev)
> -{
> -     printk(KERN_WARNING "%s: set_multicast_list called\n", dev->name);
> -}
> -
> -__initcall(simeth_probe);
> diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c
> deleted file mode 100644
> index 0a8a74271173..000000000000
> --- a/arch/ia64/hp/sim/simscsi.c
> +++ /dev/null
> @@ -1,373 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * Simulated SCSI driver.
> - *
> - * Copyright (C) 1999, 2001-2003 Hewlett-Packard Co
> - *   David Mosberger-Tang <dav...@hpl.hp.com>
> - *   Stephane Eranian <eran...@hpl.hp.com>
> - *
> - * 02/01/15 David Mosberger  Updated for v2.5.1
> - * 99/12/18 David Mosberger  Added support for READ10/WRITE10 needed by 
> linux v2.3.33
> - */
> -#include <linux/blkdev.h>
> -#include <linux/init.h>
> -#include <linux/interrupt.h>
> -#include <linux/kernel.h>
> -#include <linux/timer.h>
> -#include <asm/irq.h>
> -#include "hpsim_ssc.h"
> -
> -#include <scsi/scsi.h>
> -#include <scsi/scsi_cmnd.h>
> -#include <scsi/scsi_device.h>
> -#include <scsi/scsi_host.h>
> -
> -#define DEBUG_SIMSCSI        0
> -
> -#define SIMSCSI_REQ_QUEUE_LEN        64
> -#define DEFAULT_SIMSCSI_ROOT "/var/ski-disks/sd"
> -
> -/* Simulator system calls: */
> -
> -#define SSC_OPEN                     50
> -#define SSC_CLOSE                    51
> -#define SSC_READ                     52
> -#define SSC_WRITE                    53
> -#define SSC_GET_COMPLETION           54
> -#define SSC_WAIT_COMPLETION          55
> -
> -#define SSC_WRITE_ACCESS             2
> -#define SSC_READ_ACCESS                      1
> -
> -#if DEBUG_SIMSCSI
> -  int simscsi_debug;
> -# define DBG simscsi_debug
> -#else
> -# define DBG 0
> -#endif
> -
> -static struct Scsi_Host *host;
> -
> -static void simscsi_interrupt (unsigned long val);
> -static DECLARE_TASKLET(simscsi_tasklet, simscsi_interrupt, 0);
> -
> -struct disk_req {
> -     unsigned long addr;
> -     unsigned len;
> -};
> -
> -struct disk_stat {
> -     int fd;
> -     unsigned count;
> -};
> -
> -static int desc[16] = {
> -     -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
> -};
> -
> -static struct queue_entry {
> -     struct scsi_cmnd *sc;
> -} queue[SIMSCSI_REQ_QUEUE_LEN];
> -
> -static int rd, wr;
> -static atomic_t num_reqs = ATOMIC_INIT(0);
> -
> -/* base name for default disks */
> -static char *simscsi_root = DEFAULT_SIMSCSI_ROOT;
> -
> -#define MAX_ROOT_LEN 128
> -
> -/*
> - * used to setup a new base for disk images
> - * to use /foo/bar/disk[a-z] as disk images
> - * you have to specify simscsi=/foo/bar/disk on the command line
> - */
> -static int __init
> -simscsi_setup (char *s)
> -{
> -     /* XXX Fix me we may need to strcpy() ? */
> -     if (strlen(s) > MAX_ROOT_LEN) {
> -             printk(KERN_ERR "simscsi_setup: prefix too long---using default 
> %s\n",
> -                    simscsi_root);
> -     } else
> -             simscsi_root = s;
> -     return 1;
> -}
> -
> -__setup("simscsi=", simscsi_setup);
> -
> -static void
> -simscsi_interrupt (unsigned long val)
> -{
> -     struct scsi_cmnd *sc;
> -
> -     while ((sc = queue[rd].sc) != NULL) {
> -             atomic_dec(&num_reqs);
> -             queue[rd].sc = NULL;
> -             if (DBG)
> -                     printk("simscsi_interrupt: done with %u\n",
> -                            sc->request->tag);
> -             (*sc->scsi_done)(sc);
> -             rd = (rd + 1) % SIMSCSI_REQ_QUEUE_LEN;
> -     }
> -}
> -
> -static int
> -simscsi_biosparam (struct scsi_device *sdev, struct block_device *n,
> -             sector_t capacity, int ip[])
> -{
> -     ip[0] = 64;             /* heads */
> -     ip[1] = 32;             /* sectors */
> -     ip[2] = capacity >> 11; /* cylinders */
> -     return 0;
> -}
> -
> -static void
> -simscsi_sg_readwrite (struct scsi_cmnd *sc, int mode, unsigned long offset)
> -{
> -     int i;
> -     struct scatterlist *sl;
> -     struct disk_stat stat;
> -     struct disk_req req;
> -
> -     stat.fd = desc[sc->device->id];
> -
> -     scsi_for_each_sg(sc, sl, scsi_sg_count(sc), i) {
> -             req.addr = __pa(sg_virt(sl));
> -             req.len  = sl->length;
> -             if (DBG)
> -                     printk("simscsi_sg_%s @ %lx (off %lx) use_sg=%d 
> len=%d\n",
> -                            mode == SSC_READ ? "read":"write", req.addr, 
> offset,
> -                            scsi_sg_count(sc) - i, sl->length);
> -             ia64_ssc(stat.fd, 1, __pa(&req), offset, mode);
> -             ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION);
> -
> -             /* should not happen in our case */
> -             if (stat.count != req.len) {
> -                     sc->result = DID_ERROR << 16;
> -                     return;
> -             }
> -             offset +=  sl->length;
> -     }
> -     sc->result = GOOD;
> -}
> -
> -/*
> - * function handling both READ_6/WRITE_6 (non-scatter/gather mode)
> - * commands.
> - * Added 02/26/99 S.Eranian
> - */
> -static void
> -simscsi_readwrite6 (struct scsi_cmnd *sc, int mode)
> -{
> -     unsigned long offset;
> -
> -     offset = (((sc->cmnd[1] & 0x1f) << 16) | (sc->cmnd[2] << 8) | 
> sc->cmnd[3])*512;
> -     simscsi_sg_readwrite(sc, mode, offset);
> -}
> -
> -static size_t
> -simscsi_get_disk_size (int fd)
> -{
> -     struct disk_stat stat;
> -     size_t bit, sectors = 0;
> -     struct disk_req req;
> -     char buf[512];
> -
> -     /*
> -      * This is a bit kludgey: the simulator doesn't provide a
> -      * direct way of determining the disk size, so we do a binary
> -      * search, assuming a maximum disk size of 128GB.
> -      */
> -     for (bit = (128UL << 30)/512; bit != 0; bit >>= 1) {
> -             req.addr = __pa(&buf);
> -             req.len = sizeof(buf);
> -             ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, 
> SSC_READ);
> -             stat.fd = fd;
> -             ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION);
> -             if (stat.count == sizeof(buf))
> -                     sectors |= bit;
> -     }
> -     return sectors - 1;     /* return last valid sector number */
> -}
> -
> -static void
> -simscsi_readwrite10 (struct scsi_cmnd *sc, int mode)
> -{
> -     unsigned long offset;
> -
> -     offset = (((unsigned long)sc->cmnd[2] << 24)
> -             | ((unsigned long)sc->cmnd[3] << 16)
> -             | ((unsigned long)sc->cmnd[4] <<  8)
> -             | ((unsigned long)sc->cmnd[5] <<  0))*512UL;
> -     simscsi_sg_readwrite(sc, mode, offset);
> -}
> -
> -static int
> -simscsi_queuecommand_lck (struct scsi_cmnd *sc, void (*done)(struct 
> scsi_cmnd *))
> -{
> -     unsigned int target_id = sc->device->id;
> -     char fname[MAX_ROOT_LEN+16];
> -     size_t disk_size;
> -     char *buf;
> -     char localbuf[36];
> -#if DEBUG_SIMSCSI
> -     register long sp asm ("sp");
> -
> -     if (DBG)
> -             printk("simscsi_queuecommand: 
> target=%d,cmnd=%u,sc=%u,sp=%lx,done=%p\n",
> -                    target_id, sc->cmnd[0], sc->request->tag, sp, done);
> -#endif
> -
> -     sc->result = DID_BAD_TARGET << 16;
> -     sc->scsi_done = done;
> -     if (target_id <= 15 && sc->device->lun == 0) {
> -             switch (sc->cmnd[0]) {
> -                   case INQUIRY:
> -                     if (scsi_bufflen(sc) < 35) {
> -                             break;
> -                     }
> -                     sprintf (fname, "%s%c", simscsi_root, 'a' + target_id);
> -                     desc[target_id] = ia64_ssc(__pa(fname), 
> SSC_READ_ACCESS|SSC_WRITE_ACCESS,
> -                                                0, 0, SSC_OPEN);
> -                     if (desc[target_id] < 0) {
> -                             /* disk doesn't exist... */
> -                             break;
> -                     }
> -                     buf = localbuf;
> -                     buf[0] = 0;     /* magnetic disk */
> -                     buf[1] = 0;     /* not a removable medium */
> -                     buf[2] = 2;     /* SCSI-2 compliant device */
> -                     buf[3] = 2;     /* SCSI-2 response data format */
> -                     buf[4] = 31;    /* additional length (bytes) */
> -                     buf[5] = 0;     /* reserved */
> -                     buf[6] = 0;     /* reserved */
> -                     buf[7] = 0;     /* various flags */
> -                     memcpy(buf + 8, "HP      SIMULATED DISK  0.00",  28);
> -                     scsi_sg_copy_from_buffer(sc, buf, 36);
> -                     sc->result = GOOD;
> -                     break;
> -
> -                   case TEST_UNIT_READY:
> -                     sc->result = GOOD;
> -                     break;
> -
> -                   case READ_6:
> -                     if (desc[target_id] < 0 )
> -                             break;
> -                     simscsi_readwrite6(sc, SSC_READ);
> -                     break;
> -
> -                   case READ_10:
> -                     if (desc[target_id] < 0 )
> -                             break;
> -                     simscsi_readwrite10(sc, SSC_READ);
> -                     break;
> -
> -                   case WRITE_6:
> -                     if (desc[target_id] < 0)
> -                             break;
> -                     simscsi_readwrite6(sc, SSC_WRITE);
> -                     break;
> -
> -                   case WRITE_10:
> -                     if (desc[target_id] < 0)
> -                             break;
> -                     simscsi_readwrite10(sc, SSC_WRITE);
> -                     break;
> -
> -                   case READ_CAPACITY:
> -                     if (desc[target_id] < 0 || scsi_bufflen(sc) < 8) {
> -                             break;
> -                     }
> -                     buf = localbuf;
> -                     disk_size = simscsi_get_disk_size(desc[target_id]);
> -
> -                     buf[0] = (disk_size >> 24) & 0xff;
> -                     buf[1] = (disk_size >> 16) & 0xff;
> -                     buf[2] = (disk_size >>  8) & 0xff;
> -                     buf[3] = (disk_size >>  0) & 0xff;
> -                     /* set block size of 512 bytes: */
> -                     buf[4] = 0;
> -                     buf[5] = 0;
> -                     buf[6] = 2;
> -                     buf[7] = 0;
> -                     scsi_sg_copy_from_buffer(sc, buf, 8);
> -                     sc->result = GOOD;
> -                     break;
> -
> -                   case MODE_SENSE:
> -                   case MODE_SENSE_10:
> -                     /* sd.c uses this to determine whether disk does 
> write-caching. */
> -                     scsi_sg_copy_from_buffer(sc, (char *)empty_zero_page,
> -                                              PAGE_SIZE);
> -                     sc->result = GOOD;
> -                     break;
> -
> -                   case START_STOP:
> -                     printk(KERN_ERR "START_STOP\n");
> -                     break;
> -
> -                   default:
> -                     panic("simscsi: unknown SCSI command %u\n", 
> sc->cmnd[0]);
> -             }
> -     }
> -     if (sc->result == DID_BAD_TARGET) {
> -             sc->result |= DRIVER_SENSE << 24;
> -             sc->sense_buffer[0] = 0x70;
> -             sc->sense_buffer[2] = 0x00;
> -     }
> -     if (atomic_read(&num_reqs) >= SIMSCSI_REQ_QUEUE_LEN) {
> -             panic("Attempt to queue command while command is pending!!");
> -     }
> -     atomic_inc(&num_reqs);
> -     queue[wr].sc = sc;
> -     wr = (wr + 1) % SIMSCSI_REQ_QUEUE_LEN;
> -
> -     tasklet_schedule(&simscsi_tasklet);
> -     return 0;
> -}
> -
> -static DEF_SCSI_QCMD(simscsi_queuecommand)
> -
> -static int
> -simscsi_host_reset (struct scsi_cmnd *sc)
> -{
> -     printk(KERN_ERR "simscsi_host_reset: not implemented\n");
> -     return 0;
> -}
> -
> -static struct scsi_host_template driver_template = {
> -     .name                   = "simulated SCSI host adapter",
> -     .proc_name              = "simscsi",
> -     .queuecommand           = simscsi_queuecommand,
> -     .eh_host_reset_handler  = simscsi_host_reset,
> -     .bios_param             = simscsi_biosparam,
> -     .can_queue              = SIMSCSI_REQ_QUEUE_LEN,
> -     .this_id                = -1,
> -     .sg_tablesize           = SG_ALL,
> -     .max_sectors            = 1024,
> -     .cmd_per_lun            = SIMSCSI_REQ_QUEUE_LEN,
> -     .dma_boundary           = PAGE_SIZE - 1,
> -};
> -
> -static int __init
> -simscsi_init(void)
> -{
> -     int error;
> -
> -     host = scsi_host_alloc(&driver_template, 0);
> -     if (!host)
> -             return -ENOMEM;
> -
> -     error = scsi_add_host(host, NULL);
> -     if (error)
> -             goto free_host;
> -     scsi_scan_host(host);
> -     return 0;
> -
> - free_host:
> -     scsi_host_put(host);
> -     return error;
> -}
> -device_initcall(simscsi_init);
> diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
> deleted file mode 100644
> index 1a338e541334..000000000000
> --- a/arch/ia64/hp/sim/simserial.c
> +++ /dev/null
> @@ -1,521 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * Simulated Serial Driver (fake serial)
> - *
> - * This driver is mostly used for bringup purposes and will go away.
> - * It has a strong dependency on the system console. All outputs
> - * are rerouted to the same facility as the one used by printk which, in our
> - * case means sys_sim.c console (goes via the simulator).
> - *
> - * Copyright (C) 1999-2000, 2002-2003 Hewlett-Packard Co
> - *   Stephane Eranian <eran...@hpl.hp.com>
> - *   David Mosberger-Tang <dav...@hpl.hp.com>
> - */
> -
> -#include <linux/init.h>
> -#include <linux/errno.h>
> -#include <linux/sched.h>
> -#include <linux/sched/debug.h>
> -#include <linux/tty.h>
> -#include <linux/tty_flip.h>
> -#include <linux/major.h>
> -#include <linux/fcntl.h>
> -#include <linux/mm.h>
> -#include <linux/seq_file.h>
> -#include <linux/slab.h>
> -#include <linux/capability.h>
> -#include <linux/circ_buf.h>
> -#include <linux/console.h>
> -#include <linux/irq.h>
> -#include <linux/module.h>
> -#include <linux/serial.h>
> -#include <linux/sysrq.h>
> -#include <linux/uaccess.h>
> -
> -#include <asm/hpsim.h>
> -
> -#include "hpsim_ssc.h"
> -
> -#undef SIMSERIAL_DEBUG       /* define this to get some debug information */
> -
> -#define KEYBOARD_INTR        3       /* must match with simulator! */
> -
> -#define NR_PORTS     1       /* only one port for now */
> -
> -struct serial_state {
> -     struct tty_port port;
> -     struct circ_buf xmit;
> -     int irq;
> -     int x_char;
> -};
> -
> -static struct serial_state rs_table[NR_PORTS];
> -
> -struct tty_driver *hp_simserial_driver;
> -
> -static struct console *console;
> -
> -static void receive_chars(struct tty_port *port)
> -{
> -     unsigned char ch;
> -     static unsigned char seen_esc = 0;
> -
> -     while ( (ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR)) ) {
> -             if (ch == 27 && seen_esc == 0) {
> -                     seen_esc = 1;
> -                     continue;
> -             } else if (seen_esc == 1 && ch == 'O') {
> -                     seen_esc = 2;
> -                     continue;
> -             } else if (seen_esc == 2) {
> -                     if (ch == 'P') /* F1 */
> -                             show_state();
> -#ifdef CONFIG_MAGIC_SYSRQ
> -                     if (ch == 'S') { /* F4 */
> -                             do {
> -                                     ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR);
> -                             } while (!ch);
> -                             handle_sysrq(ch);
> -                     }
> -#endif
> -                     seen_esc = 0;
> -                     continue;
> -             }
> -             seen_esc = 0;
> -
> -             if (tty_insert_flip_char(port, ch, TTY_NORMAL) == 0)
> -                     break;
> -     }
> -     tty_flip_buffer_push(port);
> -}
> -
> -/*
> - * This is the serial driver's interrupt routine for a single port
> - */
> -static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
> -{
> -     struct serial_state *info = dev_id;
> -
> -     receive_chars(&info->port);
> -
> -     return IRQ_HANDLED;
> -}
> -
> -/*
> - * -------------------------------------------------------------------
> - * Here ends the serial interrupt routines.
> - * -------------------------------------------------------------------
> - */
> -
> -static int rs_put_char(struct tty_struct *tty, unsigned char ch)
> -{
> -     struct serial_state *info = tty->driver_data;
> -     unsigned long flags;
> -
> -     if (!info->xmit.buf)
> -             return 0;
> -
> -     local_irq_save(flags);
> -     if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) == 
> 0) {
> -             local_irq_restore(flags);
> -             return 0;
> -     }
> -     info->xmit.buf[info->xmit.head] = ch;
> -     info->xmit.head = (info->xmit.head + 1) & (SERIAL_XMIT_SIZE-1);
> -     local_irq_restore(flags);
> -     return 1;
> -}
> -
> -static void transmit_chars(struct tty_struct *tty, struct serial_state *info,
> -             int *intr_done)
> -{
> -     int count;
> -     unsigned long flags;
> -
> -     local_irq_save(flags);
> -
> -     if (info->x_char) {
> -             char c = info->x_char;
> -
> -             console->write(console, &c, 1);
> -
> -             info->x_char = 0;
> -
> -             goto out;
> -     }
> -
> -     if (info->xmit.head == info->xmit.tail || tty->stopped) {
> -#ifdef SIMSERIAL_DEBUG
> -             printk("transmit_chars: head=%d, tail=%d, stopped=%d\n",
> -                    info->xmit.head, info->xmit.tail, tty->stopped);
> -#endif
> -             goto out;
> -     }
> -     /*
> -      * We removed the loop and try to do it in to chunks. We need
> -      * 2 operations maximum because it's a ring buffer.
> -      *
> -      * First from current to tail if possible.
> -      * Then from the beginning of the buffer until necessary
> -      */
> -
> -     count = min(CIRC_CNT(info->xmit.head, info->xmit.tail, 
> SERIAL_XMIT_SIZE),
> -                 SERIAL_XMIT_SIZE - info->xmit.tail);
> -     console->write(console, info->xmit.buf+info->xmit.tail, count);
> -
> -     info->xmit.tail = (info->xmit.tail+count) & (SERIAL_XMIT_SIZE-1);
> -
> -     /*
> -      * We have more at the beginning of the buffer
> -      */
> -     count = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
> -     if (count) {
> -             console->write(console, info->xmit.buf, count);
> -             info->xmit.tail += count;
> -     }
> -out:
> -     local_irq_restore(flags);
> -}
> -
> -static void rs_flush_chars(struct tty_struct *tty)
> -{
> -     struct serial_state *info = tty->driver_data;
> -
> -     if (info->xmit.head == info->xmit.tail || tty->stopped ||
> -                     !info->xmit.buf)
> -             return;
> -
> -     transmit_chars(tty, info, NULL);
> -}
> -
> -static int rs_write(struct tty_struct * tty,
> -                 const unsigned char *buf, int count)
> -{
> -     struct serial_state *info = tty->driver_data;
> -     int     c, ret = 0;
> -     unsigned long flags;
> -
> -     if (!info->xmit.buf)
> -             return 0;
> -
> -     local_irq_save(flags);
> -     while (1) {
> -             c = CIRC_SPACE_TO_END(info->xmit.head, info->xmit.tail, 
> SERIAL_XMIT_SIZE);
> -             if (count < c)
> -                     c = count;
> -             if (c <= 0) {
> -                     break;
> -             }
> -             memcpy(info->xmit.buf + info->xmit.head, buf, c);
> -             info->xmit.head = ((info->xmit.head + c) &
> -                                (SERIAL_XMIT_SIZE-1));
> -             buf += c;
> -             count -= c;
> -             ret += c;
> -     }
> -     local_irq_restore(flags);
> -     /*
> -      * Hey, we transmit directly from here in our case
> -      */
> -     if (CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) &&
> -                     !tty->stopped)
> -             transmit_chars(tty, info, NULL);
> -
> -     return ret;
> -}
> -
> -static int rs_write_room(struct tty_struct *tty)
> -{
> -     struct serial_state *info = tty->driver_data;
> -
> -     return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
> -}
> -
> -static int rs_chars_in_buffer(struct tty_struct *tty)
> -{
> -     struct serial_state *info = tty->driver_data;
> -
> -     return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
> -}
> -
> -static void rs_flush_buffer(struct tty_struct *tty)
> -{
> -     struct serial_state *info = tty->driver_data;
> -     unsigned long flags;
> -
> -     local_irq_save(flags);
> -     info->xmit.head = info->xmit.tail = 0;
> -     local_irq_restore(flags);
> -
> -     tty_wakeup(tty);
> -}
> -
> -/*
> - * This function is used to send a high-priority XON/XOFF character to
> - * the device
> - */
> -static void rs_send_xchar(struct tty_struct *tty, char ch)
> -{
> -     struct serial_state *info = tty->driver_data;
> -
> -     info->x_char = ch;
> -     if (ch) {
> -             /*
> -              * I guess we could call console->write() directly but
> -              * let's do that for now.
> -              */
> -             transmit_chars(tty, info, NULL);
> -     }
> -}
> -
> -/*
> - * ------------------------------------------------------------
> - * rs_throttle()
> - *
> - * This routine is called by the upper-layer tty layer to signal that
> - * incoming characters should be throttled.
> - * ------------------------------------------------------------
> - */
> -static void rs_throttle(struct tty_struct * tty)
> -{
> -     if (I_IXOFF(tty))
> -             rs_send_xchar(tty, STOP_CHAR(tty));
> -
> -     printk(KERN_INFO "simrs_throttle called\n");
> -}
> -
> -static void rs_unthrottle(struct tty_struct * tty)
> -{
> -     struct serial_state *info = tty->driver_data;
> -
> -     if (I_IXOFF(tty)) {
> -             if (info->x_char)
> -                     info->x_char = 0;
> -             else
> -                     rs_send_xchar(tty, START_CHAR(tty));
> -     }
> -     printk(KERN_INFO "simrs_unthrottle called\n");
> -}
> -
> -static int rs_setserial(struct tty_struct *tty, struct serial_struct *ss)
> -{
> -     return 0;
> -}
> -
> -static int rs_getserial(struct tty_struct *tty, struct serial_struct *ss)
> -{
> -     return 0;
> -}
> -
> -static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long 
> arg)
> -{
> -     if ((cmd != TIOCSERCONFIG) && (cmd != TIOCMIWAIT)) {
> -             if (tty_io_error(tty))
> -                 return -EIO;
> -     }
> -
> -     switch (cmd) {
> -     case TIOCMIWAIT:
> -             return 0;
> -     case TIOCSERCONFIG:
> -     case TIOCSERGETLSR: /* Get line status register */
> -             return -EINVAL;
> -     }
> -     return -ENOIOCTLCMD;
> -}
> -
> -/*
> - * This routine will shutdown a serial port; interrupts are disabled, and
> - * DTR is dropped if the hangup on close termio flag is on.
> - */
> -static void shutdown(struct tty_port *port)
> -{
> -     struct serial_state *info = container_of(port, struct serial_state,
> -                     port);
> -     unsigned long flags;
> -
> -     local_irq_save(flags);
> -     if (info->irq)
> -             free_irq(info->irq, info);
> -
> -     if (info->xmit.buf) {
> -             free_page((unsigned long) info->xmit.buf);
> -             info->xmit.buf = NULL;
> -     }
> -     local_irq_restore(flags);
> -}
> -
> -static void rs_close(struct tty_struct *tty, struct file * filp)
> -{
> -     struct serial_state *info = tty->driver_data;
> -
> -     tty_port_close(&info->port, tty, filp);
> -}
> -
> -static void rs_hangup(struct tty_struct *tty)
> -{
> -     struct serial_state *info = tty->driver_data;
> -
> -     rs_flush_buffer(tty);
> -     tty_port_hangup(&info->port);
> -}
> -
> -static int activate(struct tty_port *port, struct tty_struct *tty)
> -{
> -     struct serial_state *state = container_of(port, struct serial_state,
> -                     port);
> -     unsigned long flags, page;
> -     int retval = 0;
> -
> -     page = get_zeroed_page(GFP_KERNEL);
> -     if (!page)
> -             return -ENOMEM;
> -
> -     local_irq_save(flags);
> -
> -     if (state->xmit.buf)
> -             free_page(page);
> -     else
> -             state->xmit.buf = (unsigned char *) page;
> -
> -     if (state->irq) {
> -             retval = request_irq(state->irq, rs_interrupt_single, 0,
> -                             "simserial", state);
> -             if (retval)
> -                     goto errout;
> -     }
> -
> -     state->xmit.head = state->xmit.tail = 0;
> -errout:
> -     local_irq_restore(flags);
> -     return retval;
> -}
> -
> -
> -/*
> - * This routine is called whenever a serial port is opened.  It
> - * enables interrupts for a serial port, linking in its async structure into
> - * the IRQ chain.   It also performs the serial-specific
> - * initialization for the tty structure.
> - */
> -static int rs_open(struct tty_struct *tty, struct file * filp)
> -{
> -     struct serial_state *info = rs_table + tty->index;
> -     struct tty_port *port = &info->port;
> -
> -     tty->driver_data = info;
> -     port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
> -
> -     /*
> -      * figure out which console to use (should be one already)
> -      */
> -     console = console_drivers;
> -     while (console) {
> -             if ((console->flags & CON_ENABLED) && console->write) break;
> -             console = console->next;
> -     }
> -
> -     return tty_port_open(port, tty, filp);
> -}
> -
> -/*
> - * /proc fs routines....
> - */
> -
> -static int rs_proc_show(struct seq_file *m, void *v)
> -{
> -     int i;
> -
> -     seq_printf(m, "simserinfo:1.0\n");
> -     for (i = 0; i < NR_PORTS; i++)
> -             seq_printf(m, "%d: uart:16550 port:3F8 irq:%d\n",
> -                    i, rs_table[i].irq);
> -     return 0;
> -}
> -
> -static const struct tty_operations hp_ops = {
> -     .open = rs_open,
> -     .close = rs_close,
> -     .write = rs_write,
> -     .put_char = rs_put_char,
> -     .flush_chars = rs_flush_chars,
> -     .write_room = rs_write_room,
> -     .chars_in_buffer = rs_chars_in_buffer,
> -     .flush_buffer = rs_flush_buffer,
> -     .ioctl = rs_ioctl,
> -     .throttle = rs_throttle,
> -     .unthrottle = rs_unthrottle,
> -     .send_xchar = rs_send_xchar,
> -     .set_serial = rs_setserial,
> -     .get_serial = rs_getserial,
> -     .hangup = rs_hangup,
> -     .proc_show = rs_proc_show,
> -};
> -
> -static const struct tty_port_operations hp_port_ops = {
> -     .activate = activate,
> -     .shutdown = shutdown,
> -};
> -
> -static int __init simrs_init(void)
> -{
> -     struct serial_state *state;
> -     int retval;
> -
> -     if (!ia64_platform_is("hpsim"))
> -             return -ENODEV;
> -
> -     hp_simserial_driver = alloc_tty_driver(NR_PORTS);
> -     if (!hp_simserial_driver)
> -             return -ENOMEM;
> -
> -     printk(KERN_INFO "SimSerial driver with no serial options enabled\n");
> -
> -     /* Initialize the tty_driver structure */
> -
> -     hp_simserial_driver->driver_name = "simserial";
> -     hp_simserial_driver->name = "ttyS";
> -     hp_simserial_driver->major = TTY_MAJOR;
> -     hp_simserial_driver->minor_start = 64;
> -     hp_simserial_driver->type = TTY_DRIVER_TYPE_SERIAL;
> -     hp_simserial_driver->subtype = SERIAL_TYPE_NORMAL;
> -     hp_simserial_driver->init_termios = tty_std_termios;
> -     hp_simserial_driver->init_termios.c_cflag =
> -             B9600 | CS8 | CREAD | HUPCL | CLOCAL;
> -     hp_simserial_driver->flags = TTY_DRIVER_REAL_RAW;
> -     tty_set_operations(hp_simserial_driver, &hp_ops);
> -
> -     state = rs_table;
> -     tty_port_init(&state->port);
> -     state->port.ops = &hp_port_ops;
> -     state->port.close_delay = 0; /* XXX really 0? */
> -
> -     retval = hpsim_get_irq(KEYBOARD_INTR);
> -     if (retval < 0) {
> -             printk(KERN_ERR "%s: out of interrupt vectors!\n",
> -                             __func__);
> -             goto err_free_tty;
> -     }
> -
> -     state->irq = retval;
> -
> -     /* the port is imaginary */
> -     printk(KERN_INFO "ttyS0 at 0x03f8 (irq = %d) is a 16550\n", state->irq);
> -
> -     tty_port_link_device(&state->port, hp_simserial_driver, 0);
> -     retval = tty_register_driver(hp_simserial_driver);
> -     if (retval) {
> -             printk(KERN_ERR "Couldn't register simserial driver\n");
> -             goto err_free_tty;
> -     }
> -
> -     return 0;
> -err_free_tty:
> -     put_tty_driver(hp_simserial_driver);
> -     tty_port_destroy(&state->port);
> -     return retval;
> -}
> -
> -#ifndef MODULE
> -__initcall(simrs_init);
> -#endif
> diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h
> index 80c5ef8f475e..0afb3bc4b4a1 100644
> --- a/arch/ia64/include/asm/acpi.h
> +++ b/arch/ia64/include/asm/acpi.h
> @@ -37,9 +37,7 @@ const char *acpi_get_sysname (void);
>   #else
>   static inline const char *acpi_get_sysname (void)
>   {
> -# if defined (CONFIG_IA64_HP_SIM)
> -     return "hpsim";
> -# elif defined (CONFIG_IA64_HP_ZX1)
> +# if defined (CONFIG_IA64_HP_ZX1)
>       return "hpzx1";
>   # elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
>       return "hpzx1_swiotlb";
> diff --git a/arch/ia64/include/asm/hpsim.h b/arch/ia64/include/asm/hpsim.h
> deleted file mode 100644
> index 00fbd5cc8ab8..000000000000
> --- a/arch/ia64/include/asm/hpsim.h
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -#ifndef _ASMIA64_HPSIM_H
> -#define _ASMIA64_HPSIM_H
> -
> -#ifndef CONFIG_HP_SIMSERIAL_CONSOLE
> -static inline int simcons_register(void) { return 1; }
> -#else
> -int simcons_register(void);
> -#endif
> -
> -struct tty_driver;
> -extern struct tty_driver *hp_simserial_driver;
> -
> -extern int hpsim_get_irq(int intr);
> -void ia64_ctl_trace(long on);
> -
> -#endif
> diff --git a/arch/ia64/include/asm/iosapic.h b/arch/ia64/include/asm/iosapic.h
> index f48556cb8afc..a91aeb413e17 100644
> --- a/arch/ia64/include/asm/iosapic.h
> +++ b/arch/ia64/include/asm/iosapic.h
> @@ -52,8 +52,6 @@
>   
>   #ifndef __ASSEMBLY__
>   
> -#ifdef CONFIG_IOSAPIC
> -
>   #define NR_IOSAPICS                 256
>   
>   #define iosapic_pcat_compat_init    ia64_native_iosapic_pcat_compat_init
> @@ -103,16 +101,6 @@ extern int __init iosapic_register_platform_intr (u32 
> int_type,
>   #ifdef CONFIG_NUMA
>   extern void map_iosapic_to_node (unsigned int, int);
>   #endif
> -#else
> -#define iosapic_system_init(pcat_compat)                     do { } while (0)
> -#define iosapic_init(address,gsi_base)                               
> (-EINVAL)
> -#define iosapic_remove(gsi_base)                             (-ENODEV)
> -#define iosapic_register_intr(gsi,polarity,trigger)          (gsi)
> -#define iosapic_unregister_intr(irq)                         do { } while (0)
> -#define iosapic_override_isa_irq(isa_irq,gsi,polarity,trigger)       do { } 
> while (0)
> -#define iosapic_register_platform_intr(type,gsi,pmi,eid,id, \
> -     polarity,trigger)                                       (gsi)
> -#endif
>   
>   # endif /* !__ASSEMBLY__ */
>   #endif /* __ASM_IA64_IOSAPIC_H */
> diff --git a/arch/ia64/include/asm/machvec.h b/arch/ia64/include/asm/machvec.h
> index f426a9829595..5a9a8af79308 100644
> --- a/arch/ia64/include/asm/machvec.h
> +++ b/arch/ia64/include/asm/machvec.h
> @@ -16,7 +16,6 @@
>   struct device;
>   
>   typedef void ia64_mv_setup_t (char **);
> -typedef void ia64_mv_irq_init_t (void);
>   typedef void ia64_mv_dma_init (void);
>   typedef const struct dma_map_ops *ia64_mv_dma_get_ops(struct device *);
>   
> @@ -27,9 +26,7 @@ machvec_noop (void)
>   
>   extern void machvec_setup (char **);
>   
> -# if defined (CONFIG_IA64_HP_SIM)
> -#  include <asm/machvec_hpsim.h>
> -# elif defined (CONFIG_IA64_DIG)
> +# if defined (CONFIG_IA64_DIG)
>   #  include <asm/machvec_dig.h>
>   # elif defined(CONFIG_IA64_DIG_VTD)
>   #  include <asm/machvec_dig_vtd.h>
> @@ -46,7 +43,6 @@ extern void machvec_setup (char **);
>   # else
>   #  define ia64_platform_name        ia64_mv.name
>   #  define platform_setup    ia64_mv.setup
> -#  define platform_irq_init  ia64_mv.irq_init
>   #  define platform_dma_init         ia64_mv.dma_init
>   #  define platform_dma_get_ops              ia64_mv.dma_get_ops
>   # endif
> @@ -59,7 +55,6 @@ extern void machvec_setup (char **);
>   struct ia64_machine_vector {
>       const char *name;
>       ia64_mv_setup_t *setup;
> -     ia64_mv_irq_init_t *irq_init;
>       ia64_mv_dma_init *dma_init;
>       ia64_mv_dma_get_ops *dma_get_ops;
>   } __attribute__((__aligned__(16))); /* align attrib? see above comment */
> @@ -68,7 +63,6 @@ struct ia64_machine_vector {
>   {                                           \
>       #name,                                  \
>       platform_setup,                         \
> -     platform_irq_init,                      \
>       platform_dma_init,                      \
>       platform_dma_get_ops,                   \
>   }
> @@ -91,9 +85,6 @@ extern const struct dma_map_ops *dma_get_ops(struct device 
> *);
>   #ifndef platform_setup
>   # define platform_setup                     machvec_setup
>   #endif
> -#ifndef platform_irq_init
> -# define platform_irq_init           machvec_noop
> -#endif
>   #ifndef platform_dma_init
>   # define platform_dma_init          swiotlb_dma_init
>   #endif
> diff --git a/arch/ia64/include/asm/machvec_hpsim.h 
> b/arch/ia64/include/asm/machvec_hpsim.h
> deleted file mode 100644
> index 056f8405822e..000000000000
> --- a/arch/ia64/include/asm/machvec_hpsim.h
> +++ /dev/null
> @@ -1,19 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -#ifndef _ASM_IA64_MACHVEC_HPSIM_h
> -#define _ASM_IA64_MACHVEC_HPSIM_h
> -
> -extern ia64_mv_setup_t hpsim_setup;
> -extern ia64_mv_irq_init_t hpsim_irq_init;
> -
> -/*
> - * This stuff has dual use!
> - *
> - * For a generic kernel, the macros are used to initialize the
> - * platform's machvec structure.  When compiling a non-generic kernel,
> - * the macros are used directly.
> - */
> -#define ia64_platform_name   "hpsim"
> -#define platform_setup               hpsim_setup
> -#define platform_irq_init    hpsim_irq_init
> -
> -#endif /* _ASM_IA64_MACHVEC_HPSIM_h */
> diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
> index 4ba05140b249..3ada440ff893 100644
> --- a/arch/ia64/kernel/Makefile
> +++ b/arch/ia64/kernel/Makefile
> @@ -12,13 +12,12 @@ extra-y   := head.o vmlinux.lds
>   obj-y := entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o 
> irq_ia64.o  \
>        irq_lsapic.o ivt.o machvec.o pal.o patch.o process.o perfmon.o 
> ptrace.o sal.o          \
>        salinfo.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \
> -      unwind.o mca.o mca_asm.o topology.o dma-mapping.o
> +      unwind.o mca.o mca_asm.o topology.o dma-mapping.o iosapic.o
>   
>   obj-$(CONFIG_ACPI)          += acpi.o acpi-ext.o
>   obj-$(CONFIG_IA64_BRL_EMU)  += brl_emu.o
>   
>   obj-$(CONFIG_IA64_PALINFO)  += palinfo.o
> -obj-$(CONFIG_IOSAPIC)                += iosapic.o
>   obj-$(CONFIG_MODULES)               += module.o
>   obj-$(CONFIG_SMP)           += smp.o smpboot.o
>   obj-$(CONFIG_NUMA)          += numa.o
> diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c
> index 1c81ec752b04..e3874734b149 100644
> --- a/arch/ia64/kernel/irq_ia64.c
> +++ b/arch/ia64/kernel/irq_ia64.c
> @@ -53,7 +53,6 @@
>   #define IRQ_USED            (1)
>   #define IRQ_RSVD            (2)
>   
> -/* These can be overridden in platform_irq_init */
>   int ia64_first_device_vector = IA64_DEF_FIRST_DEVICE_VECTOR;
>   int ia64_last_device_vector = IA64_DEF_LAST_DEVICE_VECTOR;
>   
> @@ -648,7 +647,6 @@ init_IRQ (void)
>   #ifdef CONFIG_PERFMON
>       pfm_init_percpu();
>   #endif
> -     platform_irq_init();
>   }
>   
>   void
> diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
> index 4dc74500eac5..42ef03ce2fd4 100644
> --- a/arch/ia64/kernel/setup.c
> +++ b/arch/ia64/kernel/setup.c
> @@ -63,7 +63,6 @@
>   #include <asm/smp.h>
>   #include <asm/tlbflush.h>
>   #include <asm/unistd.h>
> -#include <asm/hpsim.h>
>   
>   #if defined(CONFIG_SMP) && (IA64_CPU_SIZE > PAGE_SIZE)
>   # error "struct cpuinfo_ia64 too big!"
> @@ -461,16 +460,11 @@ io_port_init (void)
>   static inline int __init
>   early_console_setup (char *cmdline)
>   {
> -     int earlycons = 0;
> -
>   #ifdef CONFIG_EFI_PCDP
>       if (!efi_setup_pcdp_console(cmdline))
> -             earlycons++;
> +             return 0;
>   #endif
> -     if (!simcons_register())
> -             earlycons++;
> -
> -     return (earlycons) ? 0 : -1;
> +     return -1;
>   }
>   
>   static inline void
> @@ -608,9 +602,6 @@ setup_arch (char **cmdline_p)
>               ia64_mca_init();
>   
>       platform_setup(cmdline_p);
> -#ifndef CONFIG_IA64_HP_SIM
> -     check_sal_cache_flush();
> -#endif
>       paging_init();
>   
>       clear_sched_clock_stable();
> 

Reply via email to