Hi, I have the following problem on my linux box, it has one sony dat drive attached to it, I get a crash like the following (if I turn on scsi debugging): (command = 'dd if=linux.tgz of=/dev/st0 bs=32k') ---8<----------------8<-----------------------8<------ 0(8) left in FIFO aha152x: FIFO should be empty QUEUE STATUS: issue_SC: current_SC: 0xc0094400: target=1; lun=0; cmnd=(Write (6) 01 00 00 40 00); residual=28009; buffers=0; phase |send_ident|; in other (DATA OUT): next=0x00000000 disconnected_SC: on bus: SCSISEQ (); SCSISIG (DATA OUT); INTSTAT (lo); SSTAT (SELDI REQINIT); SSTAT (); SXFRCTL0 (CH1 ); SIGNAL (BSYI REQI ); SELID (82), SSTAT2 (SFULL ); SFCNT (8); SCSICNT (0), OFFSNT (0), SSTAT4 (); DMACNTRL0 (16BIT PIO WRITE ); DMASTAT (WORDRDY DFIFOEMP ) enabled interrupts (ENPHASEMIS ENBUSFREE ) Kernel panic: aha152x panic In swapper task - not syncing ---8<----------------8<-----------------------8<------ This is a _real_ 1520 card, not a clone or anything on a 133mhz pentium with 16 megs ram. Anything else just ask, Thanks, Patrick -- Patrick Jordan-Smith, Unix Systems Administrator, Teltrend (NZ) Ltd. - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED]
