Robert Johannes <[EMAIL PROTECTED]> wrote:
> I installed redhat 5.2 on an NCR53C8XX system with 4.5g
> I rebuilt the kernel with support for NCR53C7,8xx
the ncr53c8xx and the 53c7,8xx driver are NOT the same. Please only
use the ncr53c8xx since it's the only one supported.
> I can't access dmesg since I'm not able to boot the system atall. It
> hangs before it mounts any partitions, and by the way, / file systems is
> its own partition, and /home is also its own. / is 2.0 gig, and /home is
> 2.3 gig.
Usually when you upgrade the kernel, you keep a copy of the old config
in /etc/lilo.conf so you can always reboot to the previous kernel
version.
If the system says ``SCSI 0 host'' you didn't compile the
right low-level SCSI driver in.
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
