I am running Debian Hamm (2.0.34) on a machine in an ISP.
The controller is a dawicontrol one. The controller was
running fine before I sent the machine off though I
confess I swapped out a fast IDE CDROM and added an old
slow SCSI CDROM before I sent the machine and I can't
remember now whether I tested the CDROM or the SCSI
chain before I sent the machine off...
... cut to image from Dirty Harry with magnum pointed
at own head ... "in all the excitement, I just can't
remember ..." (feeble grin)
Now the SCSI chain is dead and I want as much advice
as I can get before I try to talk the ISP through
helping me undo this. I'll enclose dmesg output in
hope someone gets a tip about what's wrong.
TIA!
Chris
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000fa820
pcibios_init : BIOS32 Service Directory entry at 0xfaca0
pcibios_init : PCI BIOS revision 2.10 entry at 0xfacd0
Probing PCI hardware.
Calibrating delay loop.. ok - 348.16 BogoMIPS
Memory: 127216k/131072k available (1124k kernel code, 384k reserved, 2348k data)
VFS: Diskquotas version dquot_5.6.0 initialized
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Linux version 2.0.34 (root@greathan) (gcc version 2.7.2.3) #2 Thu Jul 9 10:57:48 EST
1998
Starting kswapd v 1.4.2.2
Real Time Clock Driver v1.09
tpqic02: Runtime config, $Revision: 0.4.1.5 $, $Date: 1994/10/29 02:46:13 $
tpqic02: DMA buffers: 20 blocks, at address 0x277800 (0x2777d8)
Ramdisk driver initialized : 16 ramdisks of 4096K size
loop: registered device at major 7
ide: i82371 PIIX (Triton) on PCI bus 0 function 57
ide0: BM-DMA at 0xf000-0xf007
ide1: BM-DMA at 0xf008-0xf00f
hda: QUANTUM FIREBALL EX6.4A, 6149MB w/418kB Cache, CHS=784/255/63, UDMA
hdb: QUANTUM FIREBALL EX6.4A, 6149MB w/418kB Cache, CHS=784/255/63, UDMA
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.35 MAX_MD_DEV=4, MAX_REAL=8
ncr53c8xx: at PCI bus 0, device 11, function 0
ncr53c8xx: 53c875 detected
ncr53c875-0: rev=0x04, base=0xee000000, io_port=0xe800, irq=11
ncr53c875-0: ID 7, Fast-20, Parity Checking
ncr53c875-0: on-board RAM at 0xee001000
ncr53c875-0: restart (scsi reset).
ncr53c875-0: copying script fragments into the on-board RAM ...
Failed initialization of WD-7000 SCSI card!
ppa: Version 1.42
ppa: Probing port 03bc
ppa: Probing port 0378
ppa: SPP port present
ppa: PS/2 bidirectional port present
ppa: Probing port 0278
scsi0 : ncr53c8xx - revision 2.5f.1
scsi : 1 host.
Vendor: TOSHIBA Model: CD-ROM XM-3401TA Rev: 2873
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
Vendor: IOMEGA Model: ZIP 100 Rev: J.03
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi removable disk sda at scsi0, channel 0, id 5, lun 0
scsi : detected 1 SCSI cdrom 1 SCSI disk total.
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 28
sda : extended sense code = 2
sda : block size assumed to be 512 bytes, disk size 1GB.
Partition check:
sda:scsidisk I/O error: dev 08:00, sector 0, absolute sector 0
unable to read partition table
hda: hda1 hda2 hda3 hda4
hdb: hdb1 hdb2 hdb3
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
