Carl Lonnquist wrote:
>
> Hello Everyone:
>
> This is a DUMB question but maybe someone will point me
> in the right direction.
>
> I have installed RedHat5.2 and have it working fine
> with a Busslogic SCSI controler for my disk drives.
>
> I have a new Sony DDS3 tape drive and an Adaptec controller
> installed. How do I load the aic7xxx.o module and have it
> scan the second SCSI bus??
>
> One HOWTO said that the second SCSI module has to be added
> manualy. But doesn't say how.
>
> I can reinstall RedHat but would like to avoid that if possable.
>
> Any help would be great,
in /etc/conf.modules:
pre-install st modprobe aic7xxx
This will load the aic7xxx module when you attempt to access the tape
drive. Another solution is to add "modprobe aic7xxx" to your
/etc/rc.d/rc.local file...
--
Richard Fish Enhanced Software Technologies, Inc.
Software Developer 4014 E Broadway Rd Suite 405
[EMAIL PROTECTED] Phoenix, AZ 85040
(602) 470-1115 http://www.estinc.com
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
