>From [EMAIL PROTECTED] Fri Feb 12 04:34:46 1999
>From: Richard Gooch <[EMAIL PROTECTED]>
>[EMAIL PROTECTED] writes:
>>
>> Michael wrote:
>> >I must admit I came rather late into this thread, so I don't
>> >understand what you mean by "requiring attachment".
>>
>> Under CAM, a generic scsi device does not refer to any particular
>> piece of hardware. The device is oppened, then attached to a specific
>> bus:target:lun combination.
>Gross. Doesn't make sense at all. One device per real device. That's
>the way it always has been and the way it always should be. Someone
/*--------------------------------------------------------------------------*/
This is not true! Please read my mail that I just send as a reply to
Monty.
DLPI type 2 devices need to be set up to a specific Physical point of
atachment before you may be connected to a soecific piece of hardware.
This is standard UNIX behaviour foe more than 10 years.
/*--------------------------------------------------------------------------*/
>said this was a symbios thing. I checked
Symbios is only the primary site for X33t10 standard documents.
>ftp://ftp.symbios.com/pub/standards/io/
>and I didn't see anything that was obviously about CAM.
ftp://ftp.symbios.com/pub/standards/io/x3t10/drafts/cam
What's the problem?
J�rg
EMail:[EMAIL PROTECTED] (home) J�rg Schilling D-13353 Berlin
[EMAIL PROTECTED] (uni) If you don't have iso-8859-1
[EMAIL PROTECTED] (work) chars I am J"org Schilling
URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
