I have and ava-1505 that came with my scanner and I can't seem to get the
driver to load. I've been told that the 152x driver supports it, but I've
had mixed results. I'm using kernel 2.2.1. This is the message I get when
I try to load the module:
# insmod aha152x aha152x=0x140,11,7,1,0aha152x: BIOS test: passed, detected
1 controller(s)aha152x0: vital data: PORTBASE=0x140, IRQ=11, SCSI ID=7,
reconnect=enabled, parity=disabled, synchronous=disabled, delay=100,
extended translation=disabledaha152x: trying software interrupt,
lost.aha152x: IRQ 11 possibly wrong. Please verify.scsi : 0
hosts./lib/modules/2.2.1/scsi/aha152x.o: init_module: Device or resource
busy
I've tried configuring it for different io and irq using the ISAPNP tools
with the same results. I've also looked at my BIOS settings for PNP, but
I'm not sure what to look for. The card works fine under Windows NT with IO
0x140 and IRQ 11.
Does anyone have any suggestions? I'm not sure how to debug this problem.
Any help would be appreciated.Thanks,[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
