Marc SCHAEFER wrote:
> > (scsi0) Cables present (Int-50 YES, Int-68 YES, Ext-68 NO)
>
> Is that right ?
>
yes. its working for now when we get any external devices I have to set the tape and
disk on the same cable
>
> > kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 28000002
> > kernel: extra data not valid Current error sd08:01: sense key Not Ready
> > kernel: Additional sense indicates Logical unit not ready, initializing command
>required
> > kernel: scsidisk I/O error: dev 08:01, sector 2245530
> > kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 28000002
> > kernel: extra data not valid Current error sd08:01: sense key Not Ready
> > kernel: Additional sense indicates Logical unit not ready, initializing command
>required
> > kernel: scsidisk I/O error: dev 08:01, sector 15467734
>
> Basically someone has switched off the drive (bad power?) and now he
> wants to be re-spun up. Could be bad cable or bad power supply, or
> defective drive.
hmm so the error is that noone is turning it on again or is it that it fails when it
tries
that.
I have put a cron script in that dose find on all files then wc that would be a good
simulator
for a backup. If I can run this for a few days whitout problem I know the disk is ok.
I am not sure about the termination could that produce this kind of problems?
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
