Robert,
This is the same type of problem I'm having, almost exactly the same messages.
However, mine works fine under 2.0.x, but under 2.2.x it detects the card as
an NCR53c876... Do you know of any NCR+linux specific info sites out there?
Jesse
>It detects the controller during boot up, and detects the drive, but then
>starts doing this:
>
>NCR53c875-0: Copying script fragments into the on-board RAM
>NCR53c875-0: command processing resumed
>NCR53c875-0:-<0,0>: WIDE SCSI (16 bit) enabled.
>NCR53c875-0:-<0,0>: FAST-20 SCSI 40.0MBS (100NS, offset15)
>NCR53c875-0:0: ERROR (0:18) (1-21-4) (f/3d) @ (script e60 : 19000000)
>NCR53c875-0: script cmd = 89030000
>NCR53c875-0: regdump da 10 80 3d 47 0f 00 0e 03 01 80 21 80 00 01 19
>NCR53c875-0: have to clear fifos
>NCR53C875-0: resetting, command processing suspended for 2 seconds
>NCR53C875-0: restart (scsi reset)
>NCR53C875-0; enabling clock multiplier
>NCR53C875-0: copying script fragments into the on-board RAM
>
>.....
>And loops again again again, each time changing the line above reading:
>"ERROR (0:18) (1-21-4) ...." to some thing else.
Jesse Griffis
GIS Tech/Programmer
Ecology & Environment, Inc.
Buffalo, NY.
____________________________________________________________________
Get your own FREE, personal Netscape WebMail account today at
http://webmail.netscape.com.
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
