On Wed, 9 Jun 1999, Lingyun Tuo wrote:
> I have three SCSI controllers(one sym53c810a and two sym53c896) on a
> Intel-based PC recognized as scsi 0, 1 and 2 by Linux. Now a new SCSI
> adapter QLA2000 is added and recognized as scsi 0 with the old three as scsi
> 1, 2 and 3. I don't like this behavior because this will change the device
> order in Linux system.Is there a way to have the new SCSI adapter recognized
> as scsi 3 and leave the old three untouched?
Edit hosts.c and change the order there, or (much cleaner) compile the
driver for the QLA2000 as a module and load if after the 53c8xx driver(s)
have loaded.
----don't waste your cpu, crack rc5...www.distributed.net team enzo---
Jon Lewis *[EMAIL PROTECTED]*| Spammers will be winnuked or
System Administrator | nestea'd...whatever it takes
Atlantic Net | to get the job done.
_________http://www.lewis.org/~jlewis/pgp for PGP public key__________
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
