Hello, I installed a Clariion disk array(10 disks) in an Intel architecture PC through QLA2000. But unfortunately the first disk with id 0 is not recoginized by the kernel. However all the 10 disks are detected during the BIOS startup procedure. The SCSI components in this PC are listed below: .four SCSI controllers: 1 SYM53C810A, 2 SYM53C896, 1 ISP2100(Qlogic) .16 SCSI disks(6 with SYMs, 10 with ISP2100) The Linux startup log is attatched in the end. Thanks in advance. Ltuo ...... sym53c8xx: at PCI bus 0, device 8, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c810a detected sym53c8xx: at PCI bus 1, device 3, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c896 detected sym53c8xx: at PCI bus 1, device 3, function 1 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c896 detected sym53c810a-0: rev=0x23, base=0xfa101000, io_port=0x2000, irq=58 sym53c810a-0: ID 7, Fast-10, Parity Checking sym53c810a-0: restart (scsi reset). sym53c896-1: rev=0x01, base=0xfe005000, io_port=0x3000, irq=57 sym53c896-1: ID 7, Fast-40, Parity Checking sym53c896-1: on-chip RAM at 0xfe000000 sym53c896-1: restart (scsi reset). sym53c896-1: handling phase mismatch from SCRIPTS. sym53c896-1: Downloading SCSI SCRIPTS. sym53c896-2: rev=0x01, base=0xfe005400, io_port=0x3400, irq=56 sym53c896-2: ID 7, Fast-40, Parity Checking sym53c896-2: on-chip RAM at 0xfe002000 sym53c896-2: restart (scsi reset). sym53c896-2: handling phase mismatch from SCRIPTS. sym53c896-2: Downloading SCSI SCRIPTS. ncr53c8xx: at PCI bus 0, device 8, function 0 ncr53c8xx: IO region 0x2000 to 0x207f is in use ncr53c8xx: at PCI bus 1, device 3, function 0 ncr53c8xx: IO region 0x3000 to 0x307f is in use ncr53c8xx: at PCI bus 1, device 3, function 1 ncr53c8xx: IO region 0x3400 to 0x347f is in use scsi0 : sym53c8xx - version 1.3c scsi1 : sym53c8xx - version 1.3c scsi2 : sym53c8xx - version 1.3c scsi3 : QLogic ISP2100 SCSI on PCI bus 01 device 28 irq 22 base 0x3800 scsi : 4 hosts. Vendor: SEAGATE Model: ST39140WC Rev: 1281 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi1, channel 0, id 0, lun 0 Vendor: SEAGATE Model: ST39140WC Rev: 1281 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdb at scsi1, channel 0, id 1, lun 0 Vendor: SEAGATE Model: ST39140WC Rev: 1281 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdc at scsi1, channel 0, id 2, lun 0 Vendor: SEAGATE Model: ST39140WC Rev: 1281 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdd at scsi1, channel 0, id 3, lun 0 Vendor: SEAGATE Model: ST39140WC Rev: 1281 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sde at scsi1, channel 0, id 4, lun 0 Vendor: SEAGATE Model: ST39140WC Rev: 1281 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdf at scsi1, channel 0, id 5, lun 0 Vendor: ESG-SHV Model: SCA HSBP M6 Rev: 0.61 Type: Processor ANSI SCSI revision: 02 Detected scsi generic sgg at scsi1, channel 0, id 6, lun 0 sym53c896-1-<0,0>: tagged command queue depth set to 4 sym53c896-1-<1,0>: tagged command queue depth set to 4 sym53c896-1-<2,0>: tagged command queue depth set to 4 sym53c896-1-<3,0>: tagged command queue depth set to 4 sym53c896-1-<4,0>: tagged command queue depth set to 4 sym53c896-1-<5,0>: tagged command queue depth set to 4 Vendor: SEAGATE Model: ST19171FC Rev: CC95 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdg at scsi3, channel 0, id 1, lun 0 Vendor: SEAGATE Model: ST19171FC Rev: CC88 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdh at scsi3, channel 0, id 2, lun 0 Vendor: SEAGATE Model: ST19171FC Rev: CC95 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdi at scsi3, channel 0, id 3, lun 0 Vendor: SEAGATE Model: ST19171FC Rev: CC88 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdj at scsi3, channel 0, id 4, lun 0 Vendor: SEAGATE Model: ST19171FC Rev: CC95 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdk at scsi3, channel 0, id 5, lun 0 Vendor: SEAGATE Model: ST19171FC Rev: CC95 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdl at scsi3, channel 0, id 6, lun 0 Vendor: SEAGATE Model: ST19171FC Rev: CC95 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdm at scsi3, channel 0, id 7, lun 0 Vendor: SEAGATE Model: ST19171FC Rev: CC88 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdn at scsi3, channel 0, id 8, lun 0 Vendor: SEAGATE Model: ST19171FC Rev: CC95 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdo at scsi3, channel 0, id 9, lun 0 scsi : detected 15 SCSI disks total. sym53c896-1-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15) SCSI device sda: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] sym53c896-1-<1,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15) SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] sym53c896-1-<2,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15) SCSI device sdc: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] sym53c896-1-<3,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15) SCSI device sdd: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] sym53c896-1-<4,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15) SCSI device sde: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] sym53c896-1-<5,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15) SCSI device sdf: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] SCSI device sdg: hdwr sector= 512 bytes. Sectors= 17783112 [8683 MB] [8.7 GB] SCSI device sdh: hdwr sector= 512 bytes. Sectors= 17783112 [8683 MB] [8.7 GB] SCSI device sdi: hdwr sector= 512 bytes. Sectors= 17783112 [8683 MB] [8.7 GB] SCSI device sdj: hdwr sector= 512 bytes. Sectors= 17783112 [8683 MB] [8.7 GB] SCSI device sdk: hdwr sector= 512 bytes. Sectors= 17783112 [8683 MB] [8.7 GB] SCSI device sdl: hdwr sector= 512 bytes. Sectors= 17783112 [8683 MB] [8.7 GB] SCSI device sdm: hdwr sector= 512 bytes. Sectors= 17783112 [8683 MB] [8.7 GB] SCSI device sdn: hdwr sector= 512 bytes. Sectors= 17783112 [8683 MB] [8.7 GB] SCSI device sdo: hdwr sector= 512 bytes. Sectors= 17783112 [8683 MB] [8.7 GB] eth0: Intel EtherExpress Pro 10/100 at 0x2400, 00:A0:C9:65:DE:1D, IRQ 16. Board assembly 667280-003, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x49caa8d6). Receiver lock-up workaround activated. Partition check: sda: sda1 sda2 sda3 sdb: sdb1 sdc: sdc1 sdd: sdd1 sde: sde1 sdf: sdf1 sdg: unknown partition table sdh: unknown partition table sdi: unknown partition table sdj: unknown partition table sdk: unknown partition table sdl: unknown partition table sdm: unknown partition table sdn: unknown partition table sdo: unknown partition table VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 84k freed Adding Swap: 136516k swap-space (priority -1) nfsd_init: initialized fhcache, entries=256 Adding Swap: 523004k swap-space (priority -2) Adding Swap: 393212k swap-space (priority -3) ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED]
