Hi
I think the problem belongs to the termination of the bus, because the
termination of the controller
will not work, if the computer is powered off (electrical termination).
My advice: take a short cable and a terminator, connect the cable to the
internal connector of the
controller and try again; I think power off the one computer will not
affect the throughput (electrical)
of the bus.
Dietmar
Krishna Sreehasam wrote:
>
> hi ,
> iam have a problem using a sun scsi disk bay.The setup is
> something like this:
> we have 2 PC's connected to the disc bay via a shared SCSI bus.On
> each of the PC we have a adaptec 2940 card.The linux kernel version is
> 2.0.36.
> The problem is that if i poweroff one machine( normal shutdown and
> poweroff) the othernode cannot see the scsi disk i.e scsi commands
> start hanging.
>
> what can be the problem? is it something related to the SCSi termination?
>
> TIA,
>
> Kris
>
> -------------------------------------------------------------
> Krishna Sreehasam home address:
> Senior Systems Engineer 19-12-501,
> Wipro Infotech - Technology Solutions Bairagi Patteda,
> 1st floor, Sequent India Development Center Tirupathi,A.P,
> Sri, Chamundi Complex, Voice:
> No. 26, Bommanahalli, Hosur Main Road, 91-8574-29968
> Banglore 560068.
> Voice: 91-80-5722293 ext:5243
> ----------------------------------------------------------------------
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to [EMAIL PROTECTED]
--
"Wissen ist ein Transportproblem" W. Roesler
http://home.t-online.de/home/dstein2203
[EMAIL PROTECTED] [EMAIL PROTECTED]
Systemadministrator UNIX / Linux
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
