Hi
I just installed Linux on a Dual Pentium II machine to be our new file
server running Samba.
I was stress-testing SAMBA and the SCSI system for network copies,
from a Windows NT Server to Linux SMB server. 4GB of data, (6 chunks
of 650 MBs files) . In the middle of the copy, the operation failed. I
then had a look at the syslog messages which reported SCSI errors.
I am wondering if the problem is hardware related (the AIC78xx controller)
or if it is a problem with the kernel 2.2.9.
Thanks.
(on a tangent, any idea why linux reports that 254 MB are always used and
3 MB are free. Swap is set 133 MB. It does not seem to free the
available memory).
Software:
---------
Kernel 2.2.9
Samba-2.0.4
Hardware:
---------
ASUS P2B DSF
Adaptec AIC-7890 Ultra2 SCSI host adapter onboard
256 MB RAM
4 IBM SCSI LVD drives ID 0, ID 1, ID 2 and ID 4
--- Section 1
Jun 26 19:48:39 kerrigan kernel: scsi : aborting command due to timeout :
pid 51120, scsi0, channel 0, id 4,
lun 0 Write (6) 00 c4 bb f4 00
Jun 26 19:48:39 kerrigan kernel: scsi : aborting command due to timeout :
pid 51121, scsi0, channel 0, id 4,
lun 0 Write (6) 00 c5 af f4 00
Jun 26 19:48:39 kerrigan kernel: scsi : aborting command due to timeout :
pid 51122, scsi0, channel 0, id 4,
lun 0 Write (6) 00 c6 a3 f4 00
Jun 26 19:48:39 kerrigan kernel: SCSI host 0 abort (pid 51121) timed out -
resetting
Jun 26 19:48:39 kerrigan kernel: SCSI bus is being reset for host 0
channel 0.
Jun 26 19:48:39 kerrigan kernel: (scsi0:0:0:0) Synchronous at 80.0
Mbyte/sec, offset 15.
Jun 26 19:48:39 kerrigan kernel: (scsi0:0:4:0) Synchronous at 80.0
Mbyte/sec, offset 31.
--- Section 2
Jun 26 20:24:58 kerrigan kernel: klogd 1.3-3, log source = /proc/kmsg
started.
Jun 26 20:24:58 kerrigan kernel: Loaded 6806 symbols from
/boot/System.map-2.2.9-19mdksmp.
Jun 26 20:24:58 kerrigan kernel: Symbols match kernel version 2.2.9.
Jun 26 20:24:58 kerrigan kernel: Loaded 136 symbols from 7 modules.
Jun 26 20:24:58 kerrigan kernel: scsi : aborting command due to timeout :
pid 73936, scsi0, channel 0, id 4,
lun 0 Write (10) 00 01 13 5a a5 00 00 f4 00
Jun 26 20:24:58 kerrigan kernel: scsi : aborting command due to timeout :
pid 73937, scsi0, channel 0, id 4,
lun 0 Write (10) 00 01 13 5b 99 00 00 f4 00
Jun 26 20:24:58 kerrigan kernel: SCSI host 0 abort (pid 73935) timed out -
resetting
Jun 26 20:24:58 kerrigan kernel: SCSI bus is being reset for host 0
channel 0.
Jun 26 20:24:58 kerrigan kernel:
Jun 26 20:24:58 kerrigan kernel: wait_on_bh, CPU 0:
Jun 26 20:24:58 kerrigan kernel: irq: 0 [0 0]
Jun 26 20:24:58 kerrigan kernel: bh: 1 [0 1]
Jun 26 20:24:58 kerrigan kernel: <[c010b2d9]> <[c0162a92]> <[c0162b0d]>
<[c0172065]> <[c014dd9f]> <[c0131a7f
]> <[c0131f44]> <6>(scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 15.
Jun 26 20:24:58 kerrigan kernel: (scsi0:0:4:0) Synchronous at 80.0
Mbyte/sec, offset 31.
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
