Hi All,
I hope this is the right list for this question....please let me know if
it's not. I've got an NEC Express Server 5800 120Ra2 with 500MHz cpu
running RedHat v6.0 (v2.2.5-15 because the rpm upgrade to 2.2.5-22 isn't
working properly, but that's another situation!)
The problem I've having is when I attach one of the system's AHA-2944UW to
the storage device, it initially sees all of the devices out on the storage
box, but I can only access the first four. I've attached the dmesg from
the system.
Any ideas on why this is? How do I fix this so I can access all of the
devices?
This isn't the only adapter I've had this problem with....I've had it with
a QLA1041, QLA2100F (fibre), and an NCR53c825 running on both RedHat
v2.0.36 upgraded to v2.2.5 and also v2.2.9.
Please let me know if anyone has any ideas on how to fix this.
TIA!
Heather
command processing resumed
ncr53c896-1: command processing resumed
Vendor: SEAGATE Model: ST39102LC Rev: 0005
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: NEC Model: GEM312R2-G7CGQ Rev: 4.1a
Type: Processor ANSI SCSI revision: 02
Detected scsi generic sgb at scsi0, channel 0, id 8, lun 0
ncr53c896-0-<0,0>: tagged command queue depth set to 8
ncr53c896-0-<0,*>: WIDE SCSI (16 bit) enabled.
ncr53c896-0-<0,*>: FAST-40 WIDE SCSI 80.0 MB/s (25 ns, offset 15)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17781964 [8682 MB] [8.7 GB]
sda: sda1 sda2 < sda5 sda6 >
(scsi2) <Adaptec AHA-2944 Ultra SCSI host adapter> found at PCI 6/0
(scsi2) Wide Channel, SCSI ID=7, 16/255 SCBs
(scsi2) Warning - detected auto-termination
(scsi2) Please verify driver detected settings are correct.
(scsi2) If not, then please properly set the device termination
(scsi2) in the Adaptec SCSI BIOS by hitting CTRL-A when prompted
(scsi2) during machine bootup.
(scsi2) Cables present (Int-50 NO, Int-68 NO, Ext-68 YES)
(scsi2) Downloading sequencer code... 413 instructions downloaded
(scsi3) <Adaptec AHA-2944 Ultra SCSI host adapter> found at PCI 7/0
(scsi3) Wide Channel, SCSI ID=7, 16/255 SCBs
(scsi3) Warning - detected auto-termination
(scsi3) Please verify driver detected settings are correct.
(scsi3) If not, then please properly set the device termination
(scsi3) in the Adaptec SCSI BIOS by hitting CTRL-A when prompted
(scsi3) during machine bootup.
(scsi3) Cables present (Int-50 NO, Int-68 NO, Ext-68 NO)
(scsi3) Downloading sequencer code... 413 instructions downloaded
(scsi4) <Adaptec AHA-2944 Ultra SCSI host adapter> found at PCI 8/0
(scsi4) Wide Channel, SCSI ID=7, 16/255 SCBs
(scsi4) Warning - detected auto-termination
(scsi4) Please verify driver detected settings are correct.
(scsi4) If not, then please properly set the device termination
(scsi4) in the Adaptec SCSI BIOS by hitting CTRL-A when prompted
(scsi4) during machine bootup.
(scsi4) Cables present (Int-50 NO, Int-68 NO, Ext-68 NO)
(scsi4) Downloading sequencer code... 413 instructions downloaded
scsi2 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.15/3.2.4
<Adaptec AHA-2944 Ultra SCSI host adapter>
scsi3 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.15/3.2.4
<Adaptec AHA-2944 Ultra SCSI host adapter>
scsi4 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.15/3.2.4
<Adaptec AHA-2944 Ultra SCSI host adapter>
scsi : 5 hosts.
(scsi2:0:0:0) Synchronous at 20.0 Mbyte/sec, offset 14.
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi2, channel 0, id 0, lun 0
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdc at scsi2, channel 0, id 0, lun 1
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdd at scsi2, channel 0, id 0, lun 2
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sde at scsi2, channel 0, id 0, lun 3
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdf at scsi2, channel 0, id 0, lun 4
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdg at scsi2, channel 0, id 0, lun 5
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdh at scsi2, channel 0, id 0, lun 6
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdi at scsi2, channel 0, id 0, lun 7
(scsi2:0:1:0) Synchronous at 20.0 Mbyte/sec, offset 14.
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdj at scsi2, channel 0, id 1, lun 0
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdk at scsi2, channel 0, id 1, lun 1
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdl at scsi2, channel 0, id 1, lun 2
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdm at scsi2, channel 0, id 1, lun 3
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdn at scsi2, channel 0, id 1, lun 4
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdo at scsi2, channel 0, id 1, lun 5
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdp at scsi2, channel 0, id 1, lun 6
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdq at scsi2, channel 0, id 1, lun 7
(scsi2:0:2:0) Synchronous at 20.0 Mbyte/sec, offset 14.
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdr at scsi2, channel 0, id 2, lun 0
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sds at scsi2, channel 0, id 2, lun 1
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdt at scsi2, channel 0, id 2, lun 2
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdu at scsi2, channel 0, id 2, lun 3
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdv at scsi2, channel 0, id 2, lun 4
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdw at scsi2, channel 0, id 2, lun 5
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdx at scsi2, channel 0, id 2, lun 6
Vendor: EMC Model: SYMMETRIX Rev: 5265
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdy at scsi2, channel 0, id 2, lun 7
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8837760 [4315 MB] [4.3 GB]
sdb: unknown partition table
SCSI device sdc: hdwr sector= 512 bytes. Sectors= 8837760 [4315 MB] [4.3 GB]
sdc: unknown partition table
SCSI device sdd: hdwr sector= 512 bytes. Sectors= 8837760 [4315 MB] [4.3 GB]
sdd: unknown partition table
SCSI device sde: hdwr sector= 512 bytes. Sectors= 8837760 [4315 MB] [4.3 GB]
sde: unknown partition table
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 40k freed
Adding Swap: 136516k swap-space (priority -1)
nfsd_init: initialized fhcache, entries=256
