Hello,
Since 5 years I use an Adaptec Controler AHA-2842-VL with a Seagate ST31230N
harddrive.
Last week I bought a new disk a WesternDigital WDE9100, a 50 pins connector
drive. At this time the problem start to occur:
My new configuration is (note both drives are extrernals) :
---------------+
Computer | ----------{New drive}-------{Old drive}----(Terminator)
---------------+ ID=3 ID=0
1) When I go in the Adaptec disk utility at power on followed by a CTRL-A (^A)
I don"t see the new drive, only the old one is available.
2) When I removed the old drive and connect the terminator to the new one,
and re-execute the disk Utility, the news drive is available BUT all ID
are set to this new drive (except ID=7 (the controler ID)).
At this moment I can do fdisk to define a partition and then mke2fs a
new file system in this new drive.
Please note :
In this machine I have 2 controlers:
1) aha-1520, IRQ=11 portbase=0x340
In this controler I have only one SCSI CD-ROM, in the LOG it's look
like I have 7
2) aha-2842-Vl IRQ=15
With this controler I encounter the problem that I already have on the
other controler with the CD-ROM drive.
Is anybody can help me?
Thanks.
Michel Guy Paiement
Follow an extraction of my syslog at boot time when there is only the new
drive :
Jul 26 21:11:19 xx kernel: aha152x: processing commandline: ok
Jul 26 21:11:19 xx kernel: aha152x: BIOS test: passed, detected 1 controllers
Jul 26 21:11:19 xx kernel: aha152x0: vital data: PORTBASE=0x340, IRQ=11, SCSI ID
=5, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100
Jul 26 21:11:19 xx kernel: aic7xxx: Reading SEEPROM...done.
Jul 26 21:11:19 xx kernel: aic7xxx: Extended translation enabled.
Jul 26 21:11:19 xx kernel: aic7xxx: AHA-2840 Rev E and subsequent.
Jul 26 21:11:19 xx kernel: aic7xxx: Using 4 SCB's after checking for SCB memory.
Jul 26 21:11:19 xx kernel: aic7xxx: Using level sensitive interrupts.
Jul 26 21:11:19 xx kernel: AHA-2840 AT VLB SLOT 1:
Jul 26 21:11:19 xx kernel: irq 15
Jul 26 21:11:19 xx kernel: bus release time 40 bclks
Jul 26 21:11:19 xx kernel: data fifo threshold 100
Jul 26 21:11:19 xx kernel: SCSI CHANNEL A:
Jul 26 21:11:19 xx kernel: scsi selection timeout 256 ms
Jul 26 21:11:19 xx kernel: scsi bus reset at power-on enabled
Jul 26 21:11:19 xx kernel: scsi bus parity enabled
Jul 26 21:11:19 xx kernel: scsi bus termination (low byte) enabled
Jul 26 21:11:19 xx kernel: aic7xxx: Downloading sequencer code...done.
Jul 26 21:11:19 xx kernel: aic7xxx: Resetting the SCSI bus...done.
Jul 26 21:11:19 xx kernel: scsi0 : Adaptec 152x SCSI driver; $Revision: 1.16 $
Jul 26 21:11:19 xx kernel: scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-FastSCSI)
3.2/3.1/3.0
Jul 26 21:11:19 xx kernel: scsi : 2 hosts.
Jul 26 21:11:19 xx kernel: Vendor: NEC Model: CD-ROM DRIVE:500 Rev: 2.5
Jul 26 21:11:19 xx kernel: Type: CD-ROM ANSI SCSI
revision: 02
Jul 26 21:11:19 xx kernel: Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Jul 26 21:11:19 xx kernel: Vendor: NEC Model: CD-ROM DRIVE:500 Rev: 2.5
Jul 26 21:11:19 xx kernel: Type: CD-ROM ANSI SCSI
revision: 02
Jul 26 21:11:19 xx kernel: Detected scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
Jul 26 21:11:19 xx kernel: Type: CD-ROM ANSI SCSI
revision: 02
Jul 26 21:11:19 xx kernel: Detected scsi CD-ROM sr2 at scsi0, channel 0, id 2, lun 0
Jul 26 21:11:19 xx kernel: Vendor: NEC Model: CD-ROM DRIVE:500 Rev: 2.5
Jul 26 21:11:19 xx kernel: Type: CD-ROM ANSI SCSI
revision: 02
Jul 26 21:11:19 xx kernel: Detected scsi CD-ROM sr3 at scsi0, channel 0, id 3, lun 0
Jul 26 21:11:19 xx kernel: Vendor: NEC Model: CD-ROM DRIVE:500 Rev: 2.5
Jul 26 21:11:19 xx kernel: Type: CD-ROM ANSI SCSI
revision: 02
Jul 26 21:11:19 xx kernel: Detected scsi CD-ROM sr4 at scsi0, channel 0, id 4, lun 0
Jul 26 21:11:19 xx kernel: Vendor: NEC Model: CD-ROM DRIVE:500 Rev: 2.5
Jul 26 21:11:19 xx kernel: Type: CD-ROM ANSI SCSI
revision: 02
Jul 26 21:11:19 xx kernel: Detected scsi CD-ROM sr5 at scsi0, channel 0, id 6, lun 0
Jul 26 21:11:19 xx kernel: Vendor: NEC Model: CD-ROM DRIVE:500 Rev: 2.5
Jul 26 21:11:19 xx kernel: Type: CD-ROM ANSI SCSI
revision: 02
Jul 26 21:11:19 xx kernel: Detected scsi CD-ROM sr6 at scsi0, channel 0, id 7, lun 0
Jul 26 21:11:19 xx kernel: aic7xxx: Scanning channel A for devices.
Jul 26 21:11:19 xx kernel: aic7xxx: Target 0, channel A, now synchronous at 10.0 MHz,
offset(0xf).
Jul 26 21:11:19 xx kernel: Vendor: WDIGTL Model: WDE9100 Rev: 1.5.0
Jul 26 21:11:19 xx kernel: Type: Direct-Access ANSI SCSI
revision: 02
Jul 26 21:11:19 xx kernel: Detected scsi disk sda at scsi1, channel 0, id 0, lun 0
Jul 26 21:11:19 xx kernel: aic7xxx: Target 1, channel A, now synchronous at 10.0 MHz,
offset(0xf).
Jul 26 21:11:19 xx kernel: Vendor: WDIGTL Model: WDE9100 Rev: 1.5.0
Jul 26 21:11:19 xx kernel: Type: Direct-Access ANSI SCSI
revision: 02
Jul 26 21:11:19 xx kernel: Detected scsi disk sdb at scsi1, channel 0, id 1, lun 0
Jul 26 21:11:19 xx kernel: aic7xxx: Target 2, channel A, now synchronous at 10.0 MHz,
offset(0xf).
Jul 26 21:11:19 xx kernel: Vendor: WDIGTL Model: WDE9100 Rev: 1.5.0
Jul 26 21:11:19 xx kernel: Type: Direct-Access ANSI SCSI
revision: 02
Jul 26 21:11:19 xx kernel: Detected scsi disk sdc at scsi1, channel 0, id 2, lun 0
Jul 26 21:11:19 xx kernel: aic7xxx: Target 3, channel A, now synchronous at 10.0 MHz,
offset(0xf).
Jul 26 21:11:19 xx kernel: Vendor: WDIGTL Model: WDE9100 Rev: 1.5.0
Jul 26 21:11:19 xx kernel: Type: Direct-Access ANSI SCSI
revision: 02
Jul 26 21:11:19 xx kernel: Detected scsi disk sdd at scsi1, channel 0, id 3, lun 0
Jul 26 21:11:19 xx kernel: aic7xxx: Target 4, channel A, now synchronous at 10.0 MHz,
offset(0xf).
Jul 26 21:11:19 xx kernel: Vendor: WDIGTL Model: WDE9100 Rev: 1.50
Jul 26 21:11:19 xx kernel: Type: Direct-Access ANSI SCSI
revision: 02
Jul 26 21:11:19 xx kernel: Detected scsi disk sdf at scsi1, channel 0, id 4, lun 0
Jul 26 21:11:19 xx kernel: aic7xxx: Target 5, channel A, now synchronous at 10.0 MHz,
offset(0xf).
Jul 26 21:11:19 xx kernel: Vendor: WDIGTL Model: WDE9100 Rev: 1.5.0
Jul 26 21:11:19 xx kernel: Type: Direct-Access ANSI SCSI
revision: 02
Jul 26 21:11:19 xx kernel: Detected scsi disk sdf at scsi1, channel 0, id 5, lun 0
Jul 26 21:11:19 xx kernel: aic7xxx: Target 6, channel A, now synchronous at 10.0 MHz,
offset(0xf).
Jul 26 21:11:19 xx kernel: Vendor: WDIGTL Model: WDE9100 Rev: 1.5.0
Jul 26 21:11:19 xx kernel: Type: Direct-Access ANSI SCSI
revision: 02
Jul 26 21:11:19 xx kernel: Detected scsi disk sdg at scsi1, channel 0, id 6, lun 0
Jul 26 21:11:19 xx kernel: scsi : detected 7 SCSI cdroms 7 SCSI disks total.
Jul 26 21:11:19 xx kernel: SCSI device sda: hdwr sector= 512 bytes. Sectors= 17783204
[8683 MB] [8.7 GB]
Jul 26 21:11:19 xx kernel: SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17783204
[8683 MB] [8.7 GB]
Jul 26 21:11:19 xx kernel: SCSI device sdc: hdwr sector= 512 bytes. Sectors= 17783204
[8683 MB] [8.7 GB]
Jul 26 21:11:19 xx kernel: SCSI device sdd: hdwr sector= 512 bytes. Sectors= 17783204
[8683 MB] [8.7 GB]
Jul 26 21:11:19 xx kernel: SCSI device sde: hdwr sector= 512 bytes. Sectors= 17783204
[8683 MB] [8.7 GB]
Jul 26 21:11:19 xx kernel: SCSI device sdf: hdwr sector= 512 bytes. Sectors= 17783204
[8683 MB] [8.7 GB]
Jul 26 21:11:19 xx kernel: SCSI device sdg: hdwr sector= 512 bytes. Sectors= 17783204
[8683 MB] [8.7 GB]
Jul 26 21:11:19 xx kernel: CSLIP: code copyright 1989 Regents of the University of
California.
Jul 26 21:11:19 xx kernel: smc-ultra.c:v2.00 6/6/96 Donald Becker
([EMAIL PROTECTED])
Jul 26 21:11:19 xx kernel: eth0: SMC Ultra at 0x280, 00 00 C0 F6 73 B5, IRQ 3 memory
0xd0000-0xd3fff.
Jul 26 21:11:19 xx kernel: Partition check:
Jul 26 21:11:19 xx kernel: sda: unknown partition table
Jul 26 21:11:19 xx kernel: sdb: unknown partition table
Jul 26 21:11:19 xx kernel: sdc: unknown partition table
Jul 26 21:11:19 xx kernel: sdd: unknown partition table
Jul 26 21:11:19 xx kernel: sde: unknown partition table
Jul 26 21:11:19 xx kernel: sdf: unknown partition table
Jul 26 21:11:19 xx kernel: sdg: unknown partition table
Jul 26 21:11:19 xx kernel: hda: hda1 hda2 hda3 hda4
....
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
