Marc SCHAEFER wrote:
>
> Doug Ledford <[EMAIL PROTECTED]> wrote:
> : Likely you will need driver version 5.1.18 or above for this controller. The
> : 5.1.19 driver version is already in the 2.2.11 and above kernels.
>
> I took that one, but my disks are still 40 MByte/s recognized. I checked the
> BIOS too. What is strange is that any device I tried (cheetah, old
> non u2 DDRS) is reported by the BIOS as ULTRA2/SE.
No, it's not impossible. It means that the channel is Ultra2 capable, but
that the device is running in SE mode. That, of course, forces the maximum
speed to 40MByte/s. Find whatever it is that's forcing SE mode and you'll fix
your speed problem.
> Which is an impossible combination.
>
> I will exchange the terminator, and then maybe try a BIOS upgrade.
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to [EMAIL PROTECTED]
--
Doug Ledford <[EMAIL PROTECTED]>
Opinions expressed are my own, but
they should be everybody's.
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
