Thanks for ending 3+ days of frustration. FYI the SuSE distribution (6.2)
works fine with the 1 GB RAM.
-----Original Message-----
From: Bill Bogstad [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 24, 1999 7:37 PM
To: Fisher, Doug
Cc: Linux-Scsi (E-mail)
Subject: Re: HP Netserver LPr
>Has anyone had any success in getting Redhat 6.0 installed on an HP
>Netserver LPr. Here's my config:
>
>1 GB RAM
>Dual 450 Mhz Pentium II
>Symbios SYM53C895 SCSI controller
>
>
>When I try to install i get a Kernel Panic Unable to mount root fs on
>8:21(booting from disk or CD).
>
>According to HP the LPr is supported with the Redhat Commercial Server
>Version (which I don't have).
>
>Anybody know what options you need to add to the kernel to get this
hardware
>to be supported?
I've had problems with the standard kernel that comes on the RH6.0
CD not supporting installs onto a 1Gigabyte RAM machine. Remove
some DIMMS and do the install. Then get virgin 2.0.36 source (without
RH's modifications) and build a new kernel. I believe you'll be okay
if you do this.
Good Luck,
Bill Bogstad
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
