On Sun, 5 Sep 1999, Alan Cox wrote:
> > Besides, cleaning up the code, has anyone identified specific performance
> > problems that need to be fixed in the SCSI mid-layer? For some reason the
> > Interphase FC adapter is topping out at ~72MB/s on sequential reads,
> > this seems rather low, knowing that we can get 90+ with identical hardware
> > under NT.
>
> The code is too heavy weight. I See performance limits with the Symbios
> FC card too. In paticular the commands/second is very very limited.
Depends on the number of commands per seconds you need.
I can get up to 13000 actual 1K I/O READs per seconds on a single LVD BUS
with useless kernel buffering under 2.0.36 using 2 fast disks and 2 reader
processes (1 per device to overlap driver+controller+interrupt+etc...
latencies). I just disable readahead for the block devices and read 1K
chunck at a time. May-be I could get slightly more cmds/sec by eliminating
kernel buffering (or under recent kernel), but I am too lazy to hack for
that.
The machine is a PII/233 with 66MHz system bus and 33 MHz 32bit PCI BUS,
controller can be a SYM53C896 or 895.
In my immediate opinion, it could well be some latency in some device,
likely the controller, that makes the commands/second throughput not being
as good as you expect.
G�rard.
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
