>
> Fellow developers,
>
> I'm gaving the following problem with a SCSI driver I'm writing.
> I have had the driver running fine for some time on a uniprocessor machine, but the
>smp kernel is still giving me headaches.
>
> I get a:
>
> Kernel panic: Inactive in scsi_request_queueable
> In interrupt handler - not syncing
>
> panic after a moderate amount of I/O (namely couple of thousand
> of writes to a raw disk device).
>
> I'm running stock RedHat 6.0 with 2.2.5-15smp kernel on a Dell
> PowerEdge 1300 with 2x500Mhz PIIIs.
>
> Before I dive into the kernel scsi code I wanted to see if anyone
> had an idea on what might be going afoul.
>
> cheers
> Gokhan Sozmen
I posted almost the exact same question about 2 months ago.
This is still an outstanding issue with my driver. My config is with
2 450 PII's running an Fibre Channel Adapter. Runs very well under
uniprocessor but I see the above situation with heavy IO to disk.
--
Mark Veteikis [EMAIL PROTECTED] 1-214-654-5257
Interphase Corp. 13800 Senlac Dallas Tx. 75234
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
