I have a system with a SCSI tape drive on an Adaptec AIC-7896/7 dual channel controler and have both st and aic7xxx compiled (using kernel 2.2.12) as modules. If I modprobe st at bootup, it causes aic7xxx to be loaded, and the tape drive is recognized. After some time, the aic7xxx driver is unloaded as it doesn't think it's being used. st is still loaded, since it was loaded by a modprobe and not automatically. Attempts to access the tape drive give an error because the aic7xxx driver isn't loaded. If a modprobe of st causes aic7xxx to be loaded, shouldn't aic7xxx have had its module use count incremented? ---------------------------------------------------------------------- Jon Lewis *[EMAIL PROTECTED]*| Spammers will be winnuked or System Administrator | nestea'd...whatever it takes Atlantic Net | to get the job done. _________http://www.lewis.org/~jlewis/pgp for PGP public key__________ - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED]
