On Tue, 19 Oct 1999, Doug Ledford wrote:
> On Mon, 18 Oct 1999, Gerard Roudier wrote:
>
> > The devices that appeared to be detected twice seem to be the ones that
> > reside on secondary PCI BUSes. At the time we have had to look into this
>
> Peer PCI busses to be more accurate. The problem is that the PCI probe
> code will probe the peer busses that are behind a 451NX chipset without
> needing a bridge device to guide them there (which is correct) but in
> order to make legacy PCI probe code from other OSes work on the system, HP
> put some "fake" bridge devices on pci bus 0 that *also* point to the same
> busses as the peer bus configuration registers on the 451NX chipset. Net
> result, we probe the bus twice. There is a patch that fixes this in the
> 2.2.12 kernel we shipped, and I also gave that patch to Martin and it has
> been forward ported to his 2.3 stuff. It handles more than just the 451NX
> chipset, it also does the two RCC chipsets that have peer busses and it
> handles the Compaq hot plug PCI chipset in use on most 8way x86 boxes
> today.
Thanks a lot, Doug, for your accurate explanation.
No more comments, given that your employer is throwing away any posting
from me for this discussion.
G�rard.
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
