I am a novice to linux and I am tring to install it on the fallowing
machine:
HP NetServer 4/66 LC
with 486/66 DX2 processor and a SCSI 7770 built in unit to which is
connected a 1050 MB hard disk.
When I insert the boot disk and boostrap the machine, after some
messages concernig the Hardware, I receive the fallowing:
....
aha 274x warning: ignoring channel B of 274-twin
aha 274x : extended translation disabled
AHA274x at EISA SLOT 11:
irq 15
bus release time 60 bclks
data fifo threshold 100%
SCSI CHANNEL A:
scsi id 7
scsi bus parity enabled
scsi selection timout 256 ms
scsi bus reset at power -on enabled
scsi bus termination disabled
scsi 0 : Adaptec AHA274x/284x (EISA/VL-bus -> FAST SCSI) 1.28/1.11/1.29
scsi : 1 host
scsi : aborting command due to timeout : pid 0, scsi0, id0, lun0 0 00 00
00 00 00
and the system stops
Can anyone, please, tell me what I have to do?
Thanks
G.Barbi
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
