Hello everyone. More about HP's fu**ing NCR53c400A card.
I tried that "loadlin procedure" someone posted yesterday (sorry, I
don't
have the mail around, but thank you). I think I read this person didn't
use
ncr_irq, so I tried without first:
boira:~# modprobe g_NCR5380 ncr_addr=0x290 ncr_53c400a=1
scsi0 : IRQ0 not free, interrupts disabled
scsi0 : interrupts not enabled. for better interactive performance,
scsi0 : please jumper the board for a free IRQ.
scsi0 : at port 0x290 interrupts disabled options CAN_QUEUE=16
CMD_PER_LUN=2 release=1 generic options AUTOPROBE_IRQ AUTOSENSE PSEUDO
DMA
USLEEP, USLEEP_POLL=1 USLEEP_SLEEP=20 generic release=7
scsi0 : Generic NCR5380/53C400 Driver
scsi : 1 host.
boira:~# cat /proc/scsi/g_NCR5380/0
SCSI host number 0 : Generic NCR5380/NCR53C400 Scsi Driver
Generic NCR5380 driver version 1
NCR5380 core version 7
NCR53C400 extension version 2
NCR53C400 card not detected
NCR53C400 pseudo DMA used
Using port mapping at port 0x290, no interrupt
REQ not asserted, phase unknown.
No currently connected command
issue_queue
disconnected_queue
boira:~# cat /proc/scsi/scsi
Attached devices: none
#### Ok, trying with irq...
boira:~# rmmod g_NCR5380
scsi : 0 hosts.
boira:~# modprobe g_NCR5380 ncr_addr=0x290 ncr_53c400a=1 ncr_irq=5
scsi0 : at port 0x290 irq 5 options CAN_QUEUE=16 CMD_PER_LUN=2
release=1
generic options AUTOPROBE_IRQ AUTOSENSE PSEUDO DMA USLEEP, USLEEP_POLL=1
USLEEP_SLEEP=20 generic release=7
scsi0 : Generic NCR5380/53C400 Driver
scsi : 1 host.
Vendor: HP Model: C1130A Rev: 3614
Type: Processor ANSI SCSI revision: 02
Detected scsi generic sga at scsi0, channel 0, id 2, lun 0
boira:~# cat /proc/scsi/g_NCR5380/0
SCSI host number 0 : Generic NCR5380/NCR53C400 Scsi Driver
Generic NCR5380 driver version 1
NCR5380 core version 7
NCR53C400 extension version 2
NCR53C400 card not detected
NCR53C400 pseudo DMA used
Using port mapping at port 0x290, on interrupt 5
T:2 Processor HP C1130A 3614
0 kb read in 0 secs
0 kb written in 0 secs
REQ not asserted, phase unknown.
No currently connected command
issue_queue
disconnected_queue
boira:~# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: HP Model: C1130A Rev: 3614
Type: Processor ANSI SCSI revision: 02
My limited understanding tells me that this second try was a good one.
I hope this helps. I wish someone can fix this so I (we) don't have to
depend on MS-DOS. Luckily this box has it.
Thank you for your attention and don't hesitate to ask me for more
information if there's need.
Regards,
Jordi (happy).
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
