[EMAIL PROTECTED] wrote: > On Fri, 31 Dec 1999 [EMAIL PROTECTED] wrote: > > > I understand that I can manipulate the order of module loads once I've > > got a booting a machine. The point is that loading Linux (Redhat in this > > case) in the configuration in question results in a machine that will not > > boot, due to the device names are not the same as when the box was > > installed. Therefore, I can't make new kernels, edit files, etc. > > When you did the install, both controllers were detected, but the > installation left your conf.modules with the SCSI host order swapped? > That's a bug in the RH6.1 mkinitrd - it incorrectly sorts "scsi_hostadapter" and "scsi_hostadapter1" - this is reported and fixed in RawHide. The easiest fix is to change it to "scsi_hostadapter0". Barrie -- Barrie Spence Sanity Clause? There is no Sanity Clause Home: [EMAIL PROTECTED] Telephone +44 1506 442304 Play: [EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED]
