Hi, I'm trying to install the red-Hat 6.0 on a HP Netserver E60 with : PII 450 MHZ, Ram : 256 Mo and DD 9,2 Go (2 disks with AMI MegaRaid card). The problem occured during the Red-Hat installation. It didn't probe my SCSI card (mother card integrated), an adaptec AIC 7895 it manages to see the AMI Mega Raid card, but when I try to force the Adaptec 274X, 284X, 294X driver, the system stop immediately during the autoprobe I can only turn the power off and on (Ctrl-Alt F1, F2, F3, F4 didn't work). I can boot that netserver because disks are on the Raid card, but on the SCSI bus, I have a DAT. The BIOS for it is concerned, detects correctly the SCSI card and this one detects correctly her DAT on ID n�3. It's very strange because I manage to make the same configuration on another machine (another HP netserver E60 with same caracterictics) without problem. If somebody has an idea ? Thanks in advance. S�bastien - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED]
