If you compile the driver for the Adaptec into the kernel, and use a
module for the Mylex driver, you should get the enumeration you want.
Matt Dharm
On Tue, 25 Jan 2000, [iso-8859-1] Baumgartner J�rg (RAD) wrote:
>
> Hello Folks,
>
> I am setting up a system with Linux 2.2.12 RedHat 6.1
>
> This system has two controllers:
> Adaptec managed by aic7xxx handling 4 drives I want to have as /dev/sda,
> sdb, sdc, sdd
> Mylex managed by BusLogic handling two units I want to have as /dev/sde, sdf
>
> Problem is when having Mylex linked with the two drives, BusLogic driver is
> called by hosts.c
> initialization procedure before aic7xxx, so I get a wrong devices sequence.
>
> How can I turn around this problem ?
>
> Thanks for your help.
>
> Pls answer my directly rather than to the forum: I am not declared on.
>
>
> J�rg Baumgartner
> Kantonsspital Schaffhausen
> Radiologie
> Tel.: 0041 52 634 22 45
> Fax.: 0041 52 634 22 98
>
> [EMAIL PROTECTED]
> <www.kssh.ch>
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to [EMAIL PROTECTED]
>
--
Matthew Dharm Home: [EMAIL PROTECTED]
Engineer, Qualcomm, Inc. Work: [EMAIL PROTECTED]
It's monday. It must be monday.
-- Greg
User Friendly, 5/4/1998
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
