Karl wrote:
> I use a similar setup in the boxes I sell, DC390U2B, IBM DMVS09V.
> The harddisk is without a terminator, and I strongly believe yours
> don't have it either. Are you sure about the DMVS36G, shouldn't
> it be a D at the end.
You're right, it's DMVS36D.
WRT terminator: Yes, I have an LVD/SE terminator at the end of the
cable (it's a relatively largish black box).
> Please check that first before you dwelve inte further debuggin.
> One thing you could do is to enter the scsi bios (F2 at boot) and
> verify the disk (it is nondestructive, verify that the scan start
> at block 0).
I verified the disk yesterday before receiving your mail. It did
start from block zero, and it went all the way through.
Thanks for your suggestions,
Kai
--
Kai Harrekilde-Petersen
Exbit Technology A/S
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
