John LeMay wrote:
>
> I've seen a bit of this in the list lately, but I'm still not clear on
> what these messages, which have just started popping up lately, mean:
>
> Mar 1 10:47:55 logan kernel: (scsi0:0:2:0) reducing SCSI transfer speed
> due to Domain validation failure.
> Mar 1 10:47:55 logan kernel: (scsi0:0:2:0) Performing Domain
> validation.
> Mar 1 10:47:55 logan kernel: (scsi0:0:2:0) Successfully completed
> Domain validation.
>
> I believe these started shortly after I updated the bios on my Adaptec
> 2940UW from 1.25 to 2.20, or whatever the latest is. Can anyone shed
> some light?
They are harmless. Certain types of errors cause us to perform a domain
validation. In the current version of the driver that includes
CHECK_CONDITION target status bytes (it's possible that the SENSE info could
indicate a parity error during one of the card->device data transfer phases,
which the card wouldn't catch unless the device told the card about it via the
sense info). In later versions of the driver, I may actually parse the sense
info and only perform a validation if there was a device detected parity
error, but it doesn't do so right now, that's on my todo list.
--
Doug Ledford <[EMAIL PROTECTED]> http://people.redhat.com/dledford
Please check my web site for aic7xxx updates/answers before
e-mailing me about problems
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
