It is possible to manually do this through the /proc filesystem. In
scsi.c there are comments which describe how this works:
/*
* Usage: echo "scsi add-single-device 0 1 2 3" >/proc/scsi/scsi
* with "0 1 2 3" replaced by your "Host Channel Id Lun".
* Consider this feature BETA.
* CAUTION: This is not for hotplugging your peripherals. As
* SCSI was not designed for this you could damage your
* hardware !
* However perhaps it is legal to switch on an
* already connected device. It is perhaps not
* guaranteed this device doesn't corrupt an ongoing data transfer.
*/
-Eric
----- Original Message -----
From: Ralston, Steve <[EMAIL PROTECTED]>
To: 'linux-scsi' <[EMAIL PROTECTED]>
Sent: Thursday, March 23, 2000 11:57 AM
Subject: inducing SCSI bus scan
> Is there any way for a SCSI driver to induce the scsi
> mid-layer into rescanning its bus(ses)?
> (well, besides unloading a scsi driver module and
> reloading it)
>
> Example: Someone powers up devices after boot
> or scsi driver module is loaded.
>
> Thanks,
> -SteveR
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to [EMAIL PROTECTED]
>
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
