-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Sat, 6 May 2000, John Muir wrote:
> Hi,
>
> I recently sent the message below to Castlewood. When the ORB drive
> spins-down (sleeps), attempts to access the drive afterwards fail (I/O
> errors). In order to access the disk I have to unmount the disk, and
> remount it.
I have a Castlewood drive hooked up to an Adaptec 2940 UW, running kernel
2.2.14. Spinning up and down isn't a problem. It doesn't matter how long
or whether it was unmounted or mounted, it always spins up and IO works
fine. However, I have another problem where If the disk is unmounted and
then ejected, then put back in. As soon as I mount it again, the machine
grinds puts major activity on the SCSI bus and it the machine eventually
grinds to a halt. I have to hard reboot it to recover.
Unmounting and mounting is fine, but only if I don't eject in between. I
upgraded to kernel 2.2.15pre19, and the ORB drive stopped working all
together. I couldn't even mount it, I just got the error:
mount: /dev/sdc5 has wrong major or minor number
though, I can fdisk /dev/sdc under 2.2.15pre19. I'll try out 2.2.15 in a
little while and see if anything changes with the release version.
- -cya
.sig
-----BEGIN PGP SIGNATURE-----
Version: PGP for Personal Privacy 5.0
Charset: noconv
iQA/AwUBORUcJEzrqJsFu33/EQKMIQCfbC+wsyU/upOQym3m3hOg20ud1BkAoPG9
XWJWHYSMy0AIKYaHzNExi1Nc
=9EOu
-----END PGP SIGNATURE-----
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
