On Tue, 16 May 2000, M G Berberich wrote:
> Hello,
>
> thanks for your answer.
>
> Am Montag, den 15. Mai 2000 23:26:40 schrieb G�rard Roudier:
> > On Mon, 15 May 2000, M G Berberich wrote:
>
> > > 1) How can I determine the problematic part.
> > > First guess: the sym53c8xx driver,
> >
> > Wasn't this one, IMO.
>
> I have a machine at work with a older MO (Fujitsu M2513A), and a
> Adaptec AHA-294X HA, which does no show the problem. A Friend of mine
> has another (older) MO on a Symbios HA and there I can trigger the
> problem too. So I assumed the problem may be the Symbios driver.
Hmmm... If you are not sure that the actual SCSI parameters values and
SCSI features actually used are the same on the both systems, then your
assumption is not valid. Could you check that?
For example, the aic7xxx driver may default to no tagged commands, while
the sym53c8xx driver default to tagged commands if the device claims
support for this feature.
Btw, I would get a lot more informed if you sent me accurate informations
about your system and config. Minimal could be the kernel messages at boot
for the system using the 294X and for the one that uses the 875.
> > I would suggest to to try different kernel versions, preferently stable
> > ones: 2.2.X).
>
> I already tried: 2.2.14, 2.2.15, 2.3.99.pre? with no visible
> difference.
Ok.
Gerard.
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
