Hi
I have some problems with my AHA2940U2W
I get a lot of the following errors:
scsi : aborting command due to timeout : pid 17680, scsi0, channel 0, id 0,
lun 0 Read (10) 00 00 78 1a 8c 00 00 18 00
SCSI host 0 abort (pid 17680) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
(scsi0:0:0:0) missed CMDCMPLT interrupt!
Here are some extracts also from dmesg:
(scsi0) <Adaptec AHA-294X Ultra2 SCSI host adapter> found at PCI 0/14/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 396 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.28/3.2.4
<Adaptec AHA-294X Ultra2 SCSI host adapter>
scsi : 1 host.
(scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 31.
Vendor: IBM Model: DMVS18V Rev: 0100
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
(scsi0:0:3:0) Synchronous at 10.0 Mbyte/sec, offset 32.
Vendor: HP Model: C1537A Rev: L907
Type: Sequential-Access ANSI SCSI revision: 02
scsi : detected 1 SCSI disk total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 35843670 [17501 MB] [17.5
GB]
Please CC to me also, as I do not subscribe to the list.
Regards
\Lars{}
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
