Dear all, OK heres the problem, Just recieved to new servers with Adaptec 29160N Scsi Card with IBM DDYS-T09170N Drives in them. Unfortunately there does not appear to be any drivers for them. So I dutifully went off grabbed the latest patches, created a new kernel: Kernel boots, detects the card OK, goes to grab the first host 1: (scsi 0:0:0:0) Synchronous at 160.0Mbyte/sec, offset 63, (scsi 0:0:0:0) CRC error during Data-In phase (scsi 0:0:0:0) error in intermediate CRC packet. scsi : aborting command due to timeout : pid 0, scsi 0, channel 0, id 0, lun 0, Test Unit Ready 00 00 00 00 00 Everything goes pear shaped........ Can anybody help as I have run out of ideas. With thanks Michael ==================================================== http://www.ishop.co.uk/ Build a shop on-line. Buy online. ==================================================== Michael Parkinson BSc.(Hons) Project Manager Intellnet Limited Heath House 51 Dane Street Bishops Stortford. Hertfordshire CM23 3BT Phone : 01279 602800 DDI : 01279 602805 Fax : 01279 600678 Mobile : 0370 380511 E-mail : [EMAIL PROTECTED] ICQ : 47666166 URL : http://www.intellnet.net.uk/ http://www.ishop.co.uk/ - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED]
