Dear All,
Starting off with a 29160 and 2 IBM 160 drives I have now been reduced to a
2940UW Pro with the same hard drives.
I have patched the 2.0.36 kernel to no avail, I have upgraded to the 2.2.16
and further the 2.2.17 kernel.
I have patched all the patches on the aic7xxx site.
I am near tears.
I cant get the system to boot now on the 2.2.17 as It bombs out with a
SELTO problem, 2.2.16 works sometimes but then falls over with the scsi bus
reseting. The 2.0.36 patched kernel works fine except when I do something
active on the harddrive like compliling a kernel at which point the file
system slowly starts corrupting.
PLEASE PLEASE PLEASE HAS ANYONE MANAGED TO GET A WORKING STABLE SYSTEM WITH
ANY OF THE FOLLOWING SCSI CARDS AND WHAT DO I NEED TO DO TO ACHIEVE IT:
ADAPTEC 29160
ADAPTEC 2940 U2W
ADAPTEC 2940UW Pro
ADAPTEC 2940UW
I have reached the point of begging humbly.
Will supply any info required.
With thanks
Michael
====================================================
http://www.ishop.co.uk/
Build a shop on-line.
Buy online.
====================================================
Michael Parkinson BSc.(Hons)
Project Manager
Intellnet Limited
Heath House
51 Dane Street
Bishops Stortford.
Hertfordshire
CM23 3BT
Phone : 01279 602800
DDI : 01279 602805
Fax : 01279 600678
Mobile : 0370 380511
E-mail : [EMAIL PROTECTED]
ICQ : 47666166
URL : http://www.intellnet.net.uk/
http://www.ishop.co.uk/
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
