I have:
Bus 0, device 14, function 0:
SCSI storage controller: NCR 53c895 (rev 1).
Medium devsel. IRQ 11. Master Capable. Latency=64. Min Gnt=30.Max Lat=64.
I/O at 0xdc00 [0xdc01].
Non-prefetchable 32 bit memory at 0xdfffef00 [0xdfffef00].
Non-prefetchable 32 bit memory at 0xdfffd000 [0xdfffd000].
and got ~same behavior when I connected an external tape drive, I
tested tree cables without resolving it.
I had an extra internal terminator so I attached an extra cable after
the drive and then the internal terminator, and now it works without
any problems.
So I would guess you have bad cable/terminator in some combination.
Regards,
/Karl
-----------------------------------------------------------------------
Karl Hammar Asp� Data [EMAIL PROTECTED]
Lilla Asp� 2340 0173 140 57 N�tverk
S-742 94 �sthammar 070 511 97 84 PC/Sun datorer
Sweden Linux/Unix konsulting
-----------------------------------------------------------------------
From: bartlists <[EMAIL PROTECTED]>
Subject: sym53c8xx problems
Date: Mon, 10 Jul 2000 19:56:52 +0800 (CST)
> Hi,
>
> Im still having problems with a sym53c895 SCSI card.
> I swaped to a non LVD cable to give me just UW SCSI, and the problem is still
> there.
>
> Can anyone put some light on this I tryed all sorts to fix it. Is it the card maybe.
>
>
> sym53c895-0: restart (scsi reset).
> sym53c895-0: enabling clock multiplier
> sym53c895-0: Downloading SCSI SCRIPTS.
> sym53c895-0: restart (scsi reset).
> sym53c895-0: enabling clock multiplier
> sym53c895-0: Downloading SCSI SCRIPTS.
> sym53c895-0: restart (scsi reset).
> sym53c895-0: enabling clock multiplier
> sym53c895-0: Downloading SCSI SCRIPTS.
> sym53c895-0: restart (scsi reset).
> sym53c895-0: enabling clock multiplier
> sym53c895-0: Downloading SCSI SCRIPTS.
> scsi : aborting command due to timeout : pid 41169, scsi0, channel 0, id 6,
>lun 0
> Write (10) 00 00 f3 e5 44 00 00 04 00
> sym53c8xx_abort: pid=41169 serial_number=818630
>serial_number_at_timeout=818630
> sym53c895-0: abort ccb=c7f94000 (cancel)
> scsi : aborting command due to timeout : pid 41170, scsi0, channel 0, id 6,
>lun 0
> Write (10) 00 00 f3 c8 2c 00 00 02 00
> sym53c8xx_abort: pid=41170 serial_number=818631
>serial_number_at_timeout=818631
> sym53c895-0: abort ccb=c7bed800 (cancel)
> SCSI host 0 abort (pid 41169) timed out - resetting
> SCSI bus is being reset for host 0 channel 0.
> sym53c8xx_reset: pid=41169 reset_flags=2 serial_number=818630
> serial_number_at_timeout=818630
> sym53c895-0: resetting, command processing suspended for 2 seconds
> sym53c895-0: restart (scsi reset).
> sym53c895-0: enabling clock multiplier
> sym53c895-0: Downloading SCSI SCRIPTS.
> sym53c895-0: command processing resumed
> sym53c895-0-<6,*>: WIDE SCSI (16 bit) enabled.
> sym53c895-0-<6,*>: FAST-40 WIDE SCSI 80.0 MB/s (25 ns, offset 31)
>
> Startup:
> Jul 7 19:32:49 bmw kernel: sym53c8xx: at PCI bus 0, device 11, function 0
> Jul 7 19:32:49 bmw kernel: sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
> Jul 7 19:32:49 bmw kernel: sym53c8xx: 53c895 detected with Symbios NVRAM
> Jul 7 19:32:49 bmw kernel: sym53c895-0: rev=0x01, base=0xd5910000,
>io_port=0xe400,
> irq=10
> Jul 7 19:32:49 bmw kernel: sym53c895-0: Symbios format NVRAM, ID 7, Fast-40,
>Parity
> Checking
> Jul 7 19:32:49 bmw kernel: sym53c895-0: initial
>SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex)
> 07/4e/a0/01/00/2$
> Jul 7 19:32:49 bmw kernel: sym53c895-0: final
>SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex)
> 07/4e/80/00/08/2$
> Jul 7 19:32:49 bmw kernel: sym53c895-0: on-chip RAM at 0xd5912000
> Jul 7 19:32:49 bmw kernel: sym53c895-0: resetting, command processing
>suspended for 2
> seconds
> Jul 7 19:32:49 bmw kernel: sym53c895-0: restart (scsi reset).
> Jul 7 19:32:49 bmw kernel: sym53c895-0: enabling clock multiplier
> Jul 7 19:32:49 bmw kernel: sym53c895-0: Downloading SCSI SCRIPTS.
> Jul 7 19:32:49 bmw kernel: scsi0 : sym53c8xx - version 1.3g
> Jul 7 19:32:49 bmw kernel: scsi : 1 host.
> Jul 7 19:32:49 bmw kernel: sym53c895-0: command processing resumed
> Jul 7 19:32:49 bmw kernel: Vendor: QUANTUM Model: ATLAS_V__9_WLS Rev:
>0230
> Jul 7 19:32:49 bmw kernel: Type: Direct-Access ANSI
>SCSI
> revision: 03
> Jul 7 19:32:49 bmw kernel: Detected scsi disk sda at scsi0, channel 0, id 6,
>lun 0
> Jul 7 19:32:49 bmw kernel: sym53c895-0-<6,0>: tagged command queue depth set
>to 4
> Jul 7 19:32:49 bmw kernel: scsi : detected 1 SCSI disk total.
> Jul 7 19:32:49 bmw kernel: sym53c895-0-<6,*>: WIDE SCSI (16 bit) enabled.
> Jul 7 19:32:49 bmw kernel: sym53c895-0-<6,*>: FAST-40 WIDE SCSI 80.0 MB/s
>(25 ns,
> offset 31)
> Jul 7 19:32:49 bmw kernel: SCSI device sda: hdwr sector= 512 bytes. Sectors=
>17930694
> [8755 MB] [8.8 G$
>
> Thanks for any ideas!!!
>
> BaRT
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
