Hi there, I am currently using a SuperMicro DM3 motherboard with on board controller, and Linux version 2.4.0-test5. I can deterministically freeze the machine (for about 1 minute) by running some stress test. Any advice? Thanks for your help Fab kernel: (scsi0) <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> found at PCI 3/4/0 kernel: (scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs kernel: (scsi0) Downloading sequencer code... 392 instructions downloaded kernel: scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0 kernel: <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> kernel: scsi : 1 host. kernel: (scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 31. kernel: Vendor: QUANTUM Model: ATLAS 10K 9SCA Rev: UCH0 kernel: Type: Direct-Access ANSI SCSI revision: 03 kernel: Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 kernel: scsi : detected 1 SCSI disk total. kernel: SCSI device sda: hdwr sector= 512 bytes. Sectors= 17938986 [8759 MB] [8.8 GB] Jul 30 18:02:12 crescendo2 kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 03 17 6e 00 00 10 00 Jul 30 18:02:12 crescendo2 kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 03 17 f6 00 00 10 00 Jul 30 18:02:12 crescendo2 kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 03 18 3e 00 00 08 00 Jul 30 18:02:12 crescendo2 kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 03 18 86 00 00 08 00 Jul 30 18:02:12 crescendo2 kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 03 18 f6 00 00 08 00 Jul 30 18:02:12 crescendo2 kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 03 19 6e 00 00 08 00 Jul 30 18:02:12 crescendo2 kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 03 19 96 00 00 08 00 Jul 30 18:02:12 crescendo2 kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 03 19 ce 00 00 10 00 -- Fabrizio Petrini Computer Research & Applications (CIC-3) phone : (505) 665-2969 MS B256, Los Alamos National Laboratory fax : (505) 667-1126 Los Alamos, NM 87545 -- USA e-mail: [EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED]
