Linux-Setup Digest #938, Volume #19 Mon, 30 Oct 00 13:13:08 EST
Contents:
Re: geforce2 GTS problem (LONG) (Hagbard)
Re: Dual Boot with Scovery Flash Disk and Hard Disk ([EMAIL PROTECTED])
Linux on a 66Mhz 486 with a 240MB disk? (Victor S. Miller)
HELP? Acrobat3 on Debian.... (Walt Shekrota)
Re: How to Auto Insert USB module? ("John Hall")
Redhat 7.0, faulty disk geometry problem (andersn@//nospam//isy.liu.se)
proxy on linux ("Frank")
Re: more than 26 SCSI disks ([EMAIL PROTECTED])
Re: Changing ethernet card (Michal Jaegermann)
Re: I/O address of PCMCIA Ethernet Card ("William Alexander Segraves")
Re: ALSA sound modules (Mike Oliver)
Re: How to configure Apache Web Server! (NAVARRO LOPEZ, =?iso-8859-1?Q?Jes=FAs?=
Manuel)
----------------------------------------------------------------------------
From: Hagbard <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.x,;
Subject: Re: geforce2 GTS problem (LONG)
Date: Mon, 30 Oct 2000 12:08:36 -0500
just a follow-up ...
according to the nvidia website, when i do :
# insmod NVdriver
and then
# lsmod | grep NV
I should see:
NVdriver 0 (autoclean)
instead, I see:
NVdriver 527136 (unused)
i'm a newbie to all this, so i don't really know what that means, but
i'm hoping someone else can point me in the right direction.
tia,
hagbard
my XF86Config follows:
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person
obtaining a
# copy of this software and associated documentation files (the
"Software"),
# to deal in the Software without restriction, including without
limitation
# the rights to use, copy, modify, merge, publish, distribute,
sublicense,
# and/or sell copies of the Software, and to permit persons to whom
the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be
included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project
shall
# not be used in advertising or otherwise to promote the sale, use or
other
# dealings in this Software without prior written authorization from
the
# XFree86 Project.
#
#
**********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format
of
# this file.
#
**********************************************************************
#
**********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
#
**********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA
extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx"
EndSection
#
**********************************************************************
# Files section. This allows default font and rgb paths to be set
#
**********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated
together),
# as well as specifying multiple comma-separated entries in one
FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or
other
# programs take long to start up, try moving the Type1 and Speedo
directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
#
**********************************************************************
# Server flags section.
#
**********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode
switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
#
**********************************************************************
# Input devices
#
**********************************************************************
#
**********************************************************************
# Core keyboard's InputDevice section
#
**********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to
"Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with
xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
Option "XkbCompat" ""
EndSection
#
**********************************************************************
# Core Pointer's InputDevice section
#
**********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/mouse"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
Option "ChordMiddle"
EndSection
#
**********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
#
**********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
**********************************************************************
# Monitor section
#
**********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "NEC"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31-65
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 55-100
EndSection
#
**********************************************************************
# Graphics device section
#
**********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to
override
# the driver's chipset detection, and should not normally be
specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable
driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this
section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a
device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should
not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "NVIDIA"
Driver "nvidia"
# unsupported card
#VideoRam 32768
# Insert Clocks lines here if appropriate
EndSection
#
**********************************************************************
# Screen sections
#
**********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen
section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "NVIDIA"
Monitor "NEC"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
EndSection
#
**********************************************************************
# ServerLayout sections.
#
**********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is
used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and
right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
------------------------------
From: [EMAIL PROTECTED]
Crossposted-To: comp.os.linux.hardware
Subject: Re: Dual Boot with Scovery Flash Disk and Hard Disk
Date: Mon, 30 Oct 2000 17:03:05 GMT
Why use the Flash Drive? There are times when I would like to quickly
check something on the Internet, but don't want to deal with booting
Linux (BTW, I do have Linux 2.2.17 installed on the HD), logging in,
shutting down properly and all that jazz. Yeah, the version of
Netscape is old, but using the flash drive is quick and simple.
Honestly, most of the time, the machine will be booted of the HD, so
it's not a big deal. I would just like to use the flash drive for
something rather than having it just sitting there. As for the LRP
box, I've already got a separate PC doing my routing and firewalling
using GNATbox Light. Perhaps not as potentially useful and flexible as
the LRP, but it does what I need it to do and does it well. But I
digress...
Thanks, tho'.
--ehobz
In article <8tfem2$90a$[EMAIL PROTECTED]>,
[EMAIL PROTECTED] wrote:
> What's the point of booting off from the flash drive if you have a
hard
> disk installed? Just dual boot a regular linux distro off the hard
disk.
> The version of Netscape on the Scovery's flash drive is out of date
and
> other than that all you have on the machine that is of any use is the
> ash shell.
>
> Remove the 16MB flash drive and use it to build a LRP router.
>
> -bret
>
> In article <8t6stv$d33$[EMAIL PROTECTED]>, <[EMAIL PROTECTED]> wrote:
> >Greetings,
> >
> >I recently bought a Fujitsu/Siemens Scovery 211 off of Egghead's
> >auction site. It's an fabulously kewl machine, by the way...
> >
> >Out of the box, it boots off a 16Meg flash disk. You can interrupt
the
> >normal boot process and boot from a real hard drive, at least that is
> >what the menu option says.
> >
> >I have added a CDROM drive and a hard drive to the box, and I was
> >hoping to retain the 16Meg flash drive and optionally be able to boot
> >off the hard drive using that boot up menu option
[cut]
Sent via Deja.com http://www.deja.com/
Before you buy.
------------------------------
Subject: Linux on a 66Mhz 486 with a 240MB disk?
From: [EMAIL PROTECTED] (Victor S. Miller)
Date: Mon, 30 Oct 2000 17:13:22 GMT
I have an old 66Mhz 486 with a 240MB disk which runs perfectly
reliably on Windows 95, but I basically don't use it anymore since we
now have -- mostly for my wife -- a Gateway 733 with a 30 GB hard
disk, and a 166Mhz Pentium MMX with a 10GB hard disk running RH 7.0.
Is it conceivable that I could get some version of Linux (doing
something useful) to run on the old machine? If so, what version (and
what features) would you suggest?
--
Victor S. Miller | " ... Meanwhile, those of us who can compute can hardly
[EMAIL PROTECTED] | be expected to keep writing papers saying 'I can do the
CCR, Princeton, NJ | following useless calculation in 2 seconds', and indeed
08540 USA | what editor would publish them?" -- Oliver Atkin
------------------------------
From: [EMAIL PROTECTED] (Walt Shekrota)
Subject: HELP? Acrobat3 on Debian....
Date: 30 Oct 2000 17:24:37 GMT
2.0.36 kernel deb 2.1
untar file ar302_tar.Z and ./INSTALL
/usr/local/Acrobat3/bin.acroread
generates the message "can't load libXt.so.6"
the ".6" libs are there! (including the one in question) So I assume there
is an indirect reason for not loading?
Any direction in the problem would be greatly appreciated.
Thanks
-Walt
--
Walt Shekrota
Remove 'nul' from my id to reply!
------------------------------
From: "John Hall" <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.misc,comp.os.linux.hardware
Subject: Re: How to Auto Insert USB module?
Date: Mon, 30 Oct 2000 17:29:31 GMT
as already mentioned /etc/rc.d/rc.local or if you want to get into the guts
of your machine make your own rc.sysinit [make sure to backup!]
But alternatively, today's kernels can auto-probe for modules and install
them automatically; if you're ready to compile a kernel yourself, look into
it.
"root" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> Dear sir
>
> I am using a Creative Web3 Cam and have installed a usb driver ov511.o.
> However, I need to use the command "insmod ov511.o" to activate it. I
> have tried to use xconfig to set "y" instead of "m" and then build
> kernel again but cannot work :-(. Is there any place in Linux can
> automatically run some commands during startup (such as AUTOEXEC.BAT in
> DOS) ?
>
> Please give me some advices on this case.
>
> Thanks a lot
>
> Alan Po
>
------------------------------
From: andersn@//nospam//isy.liu.se
Subject: Redhat 7.0, faulty disk geometry problem
Date: 30 Oct 2000 17:36:00 GMT
Hi all.
I'm trying to install Redhat 7.0 on a hard disk with the geometry C/H/S =
6296/16/63. The BIOS autodetects it as such, but during installation Linux
says that the geometry is C/H/S = 3148/32/63. However installation works fine
but after rebooting only the letter L (of LILO) shows up and the system hangs.
Installing Redhat 6.2 on the same hard disk yields the very same result with
the geometry (that is Linux says 3148/32/63) but now Redhat 6.2 boots up
properly.
Is it possible to actually use one geometry during installation and another
when booting up the system? (I think not)
I'm confused about Linux saying C/H/S is 3148/32/63 and booting is possible
with 6.2 but not 7.0 (a bug?).
Is Linux dependant upon C/H/S in BIOS for more than just loading MBR,
bootrecord in active partition and then LILO?
Any ideas as to why 6.2 will work but not 7.0?
/Anders
------------------------------
From: "Frank" <[EMAIL PROTECTED]>
Subject: proxy on linux
Date: Mon, 30 Oct 2000 12:33:46 -0500
Does linux Redhat 6.2 or Suse 6.4 have a proxy server in their release
packages? Is so, could you please tell me what is the name of the package.
And if not, where I can download it? Thans.
Frank
------------------------------
From: [EMAIL PROTECTED]
Subject: Re: more than 26 SCSI disks
Date: Mon, 30 Oct 2000 17:41:53 GMT
In article <[EMAIL PROTECTED]>,
[EMAIL PROTECTED] wrote:
> On Mon, 16 Oct 2000 16:58:54 GMT, [EMAIL PROTECTED]
<[EMAIL PROTECTED]> wrote:
> >Hello,
> >
> >I have a linux machine (SUSE 6.4, Kernel 2.2.14) with 30 SCSI Disks
> >attached, but I can access only 26.
> >
> >The scsi driver detects all 30 disks with the corresponding device
> >(sda-sdz, sdaa-sdad), but only registers the first 26 disks
(sda-sdz).
> >
> >How can I tell linux to access the remaining disks ?
> Do you have /dev/sda[a-d] scsi devices? if not you will need
> to make them with mknod. Since my Linux 2.0.38 kernel does not go
> beyound 16 SCSI units I am unable to tell you how to access the rest.
> Look in your /usr/src/linux/Documenation/device.txt file for the
> major/minor numbers to feed into mknod for adding devices sdaa-sdad.
I did this already, otherwise I couldn't access disks from 17-26.
Any other idea ?
Cheers
Bernhard
Sent via Deja.com http://www.deja.com/
Before you buy.
------------------------------
From: [EMAIL PROTECTED] (Michal Jaegermann)
Crossposted-To: comp.os.linux.alpha
Subject: Re: Changing ethernet card
Date: 30 Oct 2000 17:43:14 GMT
Reply-To: [EMAIL PROTECTED]
John Beardmore ([EMAIL PROTECTED]) wrote:
: I've got a DEC 2100 Alpha server which came with an old 10 MHz half
: duplex UTP ethernet card in an EISA slot.
....
: Can I just add an Intel PCI card to this box ?
There is no such thing as an "Intel PCI card". There are broken
pseudo-PCI cards which cut spec corners not deep enough for that to be
visible under Windows. This happens most often with sound cards.
: Assuming Linux can recognise and enable the new card, how do I control
: the bindings to the two cards ?
Usually the easiest is do that with modules. If you run 'netconf'
then you can tell which module to use with which card and this
will rewrite /etc/modules.conf for you. Otherwise see
BootPrompt-HOWTO, Section 10.1
: Could I for example configure the new card to handle all ethernet
: traffic at the moment, but still leave the old card undisturbed 'just in
: case' ?
Yes.
: If I want to use the old card to talk to a firewall in the future, where
: will I need to look to find how to bind the new 100 MHz nic to my LAN,
: and the old 10 MHz card to firewall ?
Just configure your cards with proper addresses.
Michal
------------------------------
From: "William Alexander Segraves" <[EMAIL PROTECTED]>
Subject: Re: I/O address of PCMCIA Ethernet Card
Date: Mon, 30 Oct 2000 11:49:26 -0600
Reply-To: "William Alexander Segraves" <[EMAIL PROTECTED]>
Tim,
>From my Slackware 7.0 laptop installation (to ramdisk):
1. Boot with Bareapm.i Boot disk.
2. Use Color.gz for Root disk.
3. Login as "root", no password.
4. Type "pcmcia".
5. Use "Pcmcia.dsk". (This will wake up your PCMCIA services. The light on
my NIC came on.)
6. Type "network".
7. Use "Network.dsk". (This will probe for network modules. In my case,
3c575 NIC, there was no module found; so this is as far as I've gotten with
Slackware 7.0)
IIRC, Slackware 7.0 DOES have the 3c575 NIC module in the set for the full
installation; but a full installation was not my objective.
BTW, you didn't mention what card you have that was not recognized.
You may wish to try what DID work for me, with almost no effort. I bought a
copy of Bill Ball's book, LINUX FOR YOUR LAPTOP, see www.williamball.com ,
which has a copy of LinuxCare's Bootable Business Card (BBC) packaged with
it. I booted from the BBC, getting a fully networked (ramdisk) installation
going in just a few minutes.
Bill's boot was definitely a worthwhile investment, as it saved me the time
it would have taken to build my own floppy-based installation on the Toshiba
445CDT Laptop that now sports a means of booting into Linux on ramdisk,
which was my original objective.
Bill Segraves
Auburn, AL
"Dave Brown" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> In article <8tf02p$s8i$[EMAIL PROTECTED]>, [EMAIL PROTECTED] wrote:
> >I have a new PCMCIA ethernet card. Everything about the card and
> >network installation seems fine, except identifying the card.
> >
> >The probe at the end of my "netconfig" on Slackware7 does not find it.
> >
> >When the card is inserted or "crdctl insert" is run, the beeps are HIGH
> >then LOW. (From the HOWTO, this indicates an inidentified card).
> >
> >On boot I get: "eth0 - unknown interface no such device"
> >...
>
> I suspect the card you have is not supported. (You didn't mention the
> brand.)
>
> Depending on your startup scripts, network initialization may be
> called prior to pc card services being started, and you'll see a
> network startup failure message. Then when the card-services module
> is loaded, you hear the beeps, and if your card is supported, the
> card-services process will restart the network initialization.
>
>
>
>
> --
> Dave Brown Austin, TX
------------------------------
From: Mike Oliver <[EMAIL PROTECTED]>
Subject: Re: ALSA sound modules
Date: Mon, 30 Oct 2000 10:01:19 -0800
Reply-To: [EMAIL PROTECTED]
"Dr. Jason J. Hogan-O'Neill" wrote:
>
> Whats RTFM???
>
It stands for "Read the fine manual". Don't let anyone
give you a different adjective here.
------------------------------
From: NAVARRO LOPEZ, =?iso-8859-1?Q?Jes=FAs?= Manuel
Subject: Re: How to configure Apache Web Server!
Date: Mon, 30 Oct 2000 18:27:12 +0100
Ivan wrote:
>
> "low" <[EMAIL PROTECTED]> ha scritto nel messaggio
> >
>
> You must use Linuxconf or Webmin - go into the apache section and insert the
> name of your server in Server Name .....
>
You... *must*...???
--
SALUD,
Jes�s
***
[EMAIL PROTECTED]
***
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.setup) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Setup Digest
******************************
