Linux-Setup Digest #25, Volume #21 Tue, 10 Apr 01 18:13:06 EDT
Contents:
Re: Help! - Loading Sound Module Prevents Booting (bill davidsen)
Help needed with Linux software install (pezdro)
kernel / hardware problem ([EMAIL PROTECTED])
Re: Suppressing Redhat bootup output (Paul Haley)
Re: LILO at start prints "LI" (Lynn Morrison)
Linux and Solaris X86 ([EMAIL PROTECTED])
Re: Suppressing Redhat bootup output ("ne...")
Re: DRI Drivers with XFree86-4.0.2 (Reto Wigger)
Re: Switching between KDE and GNOME (John Todd)
Re: Suppressing Redhat bootup output (Craig Kelley)
Re: Yamaha PCI (Dell m/b) and 2.4 (Craig Kelley)
Where to find mkinitrd-2.9.1.src.rpm? (Tim J)
Re: Help! - Loading Sound Module Prevents Booting (Craig Kelley)
Re: Two frustrating Samba problems... ("Tony")
Re: Sharing Files. ("robert smith")
Re: RH7 and Samba with encrypted passwds (Rod Smith)
Re: Where to find mkinitrd-2.9.1.src.rpm? (tech2kjason)
Re: Yamaha PCI (Dell m/b) and 2.4 ("Jonas Due Vesterheden")
Re: Two frustrating Samba problems... (tech2kjason)
Epson Stylus 740 printer problem (Stephen Mattick)
----------------------------------------------------------------------------
From: [EMAIL PROTECTED] (bill davidsen)
Subject: Re: Help! - Loading Sound Module Prevents Booting
Date: 10 Apr 2001 19:10:14 GMT
In article <[EMAIL PROTECTED]>,
Richard A. Bilonick <[EMAIL PROTECTED]> wrote:
| I tried to install a sound module using sndconfig. Now when I try to
| boot, the boot stops at the load sound module line and just sits there.
| How can I get it to skip loading the sound module so the boot process
| can complete? Do I have to re-install the system to fix this?
Boot from a recovery floppy/CD and edit the line. With Slackware the
install floppy will do enough to allow you to mount the hd root, with RH
select recovery on the CD boot. Or use what comes with you Brdistro.
--
bill davidsen <[EMAIL PROTECTED]> CTO, TMR Associates, Inc
At LinuxExpo Sun was showing Linux applications running on Solaris.
They don't get it, the arrow points the other way. There's a reason why
there's no SolarisExpo, Solaris is a tool; Linux is a philosophy, a
religion, a way of life, and only incidentally an operating system.
------------------------------
From: pezdro <[EMAIL PROTECTED]>
Subject: Help needed with Linux software install
Date: Tue, 10 Apr 2001 19:30:09 -0000
my friend sent me an copy of the linux CD ( which I'm not sure if he
ripped it properly) and I burned the iso. The cd contains the files I
would need to install linux, but it won't autoboot. So I was told that I
could just copy the files onto my comp and just tell the install program
to check the hard disk. Linux installer finds the files but it won't
contiune the install product. Instead it tells me its checking the cd-rom
and renders me to a screen where I type things that have no effect. I am
totally lost and need what ever kind of help there can be.
my icq number is 23649206
--
Posted via CNET Help.com
http://www.help.com/
------------------------------
From: [EMAIL PROTECTED]
Subject: kernel / hardware problem
Date: Tue, 10 Apr 2001 21:41:37 +0200
Hi everyone,
I have a problem compiling joystick-support into my brand new kernel
2.4.2. My older (SuSE) kernel 2.2.16 recognized my M$*%=A7-Sidewinder 3D
Pro, but my original (no SuSE) 2.4.2 won't. Obviously there is some
hardeware conflict or whatever, but I cannot reproduce the working
settings from the 2.2.16 kernel in the 2.4.2 maybe someone of you has
got some hint on what my problem might be.
Here is what the 2.2.16 kernel says about the soundcard and the joystick
at boot-time:
==================
es1371: version v0.22 time 16:32:31 Feb 14 2001
es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02
es1371: found es1371 rev 2 at io 0xdc00 irq 5
es1371: features: joystick 0x200
es1371: codec vendor v (0x838476) revision 9 (0x09)
es1371: codec features 18bit DAC 18bit ADC
es1371: stereo enhancement: SigmaTel SS3D
Sound initialization started
Sound initialization complete
js: Joystick driver v1.2.15 (c) 1999 Vojtech Pavlik <[EMAIL PROTECTED]>
js0: SideWinder 3D Pro [PnP 1.00 id PNP0F1F rev 01.00.08] at 0x201 [1022
ns res 3-bit id 160 data 66]
==================
and this is what the 2.4.2 kernal says:
==================
es1371: version v0.27 time 20:25:25 Apr 10 2001
es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02
PCI: Found IRQ 5 for device 00:0b.0
PCI: The same IRQ used for device 00:07.2
es1371: found es1371 rev 2 at io 0xdc00 irq 5
es1371: features: joystick 0x0
ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
===================
Ok, so there is some IRQ conflict (or not??) with the soundcard,
although the soundcard itself works with the 2.4.2 kernel.
What are the devices 00:0b.0 and 00:07.2? Are 0b.0 and 07.2 the major
and minor numbers of the device?
How do I get the 2.4.2 kernel to reconfigure the irqs so that there are
no conflicts?
Or is there anything else I can do to make things work.
Thanks for any hints!!
Volker
(For personal e-mail please remove all 'n' from my given adress!)
------------------------------
Crossposted-To: comp.os.linux.development.system,comp.os.linux.misc
Subject: Re: Suppressing Redhat bootup output
From: [EMAIL PROTECTED] (Paul Haley)
Date: Tue, 10 Apr 2001 19:41:41 GMT
Kasper Dupont <[EMAIL PROTECTED]> wrote in
<[EMAIL PROTECTED]>:
>--------------55870E7A2CA7274571662124
>Paul Haley wrote:
>>
>> Hello,
>>
>> I'm running Redhat 6.2 and would like to suppress the output on
>> bootup, such as "Loading cron..... [OK]", etc. All I want is to have
>> lilo say "loading linux" and then give me a login prompt, though of
>> course I still want all the programs/processes to run, I just don't
>> want them to output to the screen. I checked out the init scripts and
>> nothing jumped out at me.
>>
>> Can somebody help?
>>
>> Regards,
>> Paul
>
>Why don't you want the output?
>
>With output to the screen you can see how
>far the startup has come, and in case
>something goes wrong you will have a chance
>to find the problem.
>
>If you really want to do this change the
>console to null in the file /etc/lilo.conf
>and run /sbin/lilo. Next time you boot you
>will get no output.
>
>See my previous posting for details.
Thanks for your followup to my post on this subject. I entered:
append="console=null" at the bottom of the kernel settings in lilo.conf,
however it gets rid of only kernel messages I'm guessing. The PCI probes
and SCSI output are gone, but there is still quite a bit of output such as:
Mounting filesystems
Starting cron daemon [OK]
Starting pcmcia [OK]
etc.
Any way to get rid of that?
Regards,
Paul
------------------------------
Date: Tue, 10 Apr 2001 15:55:27 -0400
From: Lynn Morrison <[EMAIL PROTECTED]>
Subject: Re: LILO at start prints "LI"
This is not BIOS related, it is a problem with exactly "where" on the bootdisk is
the kernel. This is indicative of larger SCSI drives where the kernel does not
reside in the first 1024 cylinders of the drive. In this case, using the keywork
LINEAR in your LILO configuration file is essential and will fix it 9 times out of
10...
Lynn
Bloody Viking wrote:
> Some computers have flaky BIOSes, in which case no LILO fix will work. If your
> computer is not flaky, someone might well give you clues, or if your computer
> is flaky, you may never be able to use LILO at all apart from the install
> disks. My computer is a flaky one, so I use the Loadlin method of lighting off
> Linux.
>
> --
------------------------------
From: [EMAIL PROTECTED]
Subject: Linux and Solaris X86
Date: Tue, 10 Apr 2001 19:55:12 GMT
has anyone had any success on installing Linux by
a) resizing a partition on solaris x86 and then
b) installing Linux on the new partition
Thanks
--
Sent by rohitver from hotmail within field com
This is a spam protected message. Please answer with reference header.
Posted via http://www.usenet-replayer.com/cgi/content/new
------------------------------
Crossposted-To: comp.os.linux.development.system,comp.os.linux.misc
From: "ne..." <[EMAIL PROTECTED]>
Subject: Re: Suppressing Redhat bootup output
Date: Tue, 10 Apr 2001 20:20:11 GMT
On Apr 10, 2001 at 19:41, Paul Haley eloquently wrote:
[...]
>Mounting filesystems
>Starting cron daemon [OK]
>Starting pcmcia [OK]
>etc.
>
>Any way to get rid of that?
This is from the rc scripts. I guess you'll to hack them.
--
Registered Linux User # 125653 (http://counter.li.org)
This week only, all our fiber-fill jackets are marked down!
4:15pm up 24 days, 16:14, 9 users, load average: 0.06, 0.03, 0.01
------------------------------
From: Reto Wigger <[EMAIL PROTECTED]>
Subject: Re: DRI Drivers with XFree86-4.0.2
Date: Wed, 11 Apr 2001 21:40:29 +0200
So the Problem is fixed. DRI is now loaded. But my
/var/log/XFree86.0.log meant the following.
(II) R128(0): Using 8 MB AGP aperture
(II) R128(0): Using 1 MB for the ring buffer
(II) R128(0): Using 2 MB for vertex/indirect buffers
(II) R128(0): Using 5 MB for AGP textures
That makes 16MB GraphicCard memory. But my Card
supports 32MB.
And Quake is still running not very liquid.
Even unplayable. Every 2 seconds a new frame.
But the graphic quality equals to Quake under Windows.
How can I get it liquid?
rewi
--
Warum durch ein Fenster gucken, wenn die T�r schon offen steht?
have a lot of fun
rewi
------------------------------
From: [EMAIL PROTECTED] (John Todd)
Subject: Re: Switching between KDE and GNOME
Date: 10 Apr 2001 19:35:44 GMT
Reply-To: [EMAIL PROTECTED]
Easiest: in a terminal, type "switchdesk" and
follow instructions.
On Tue, 10 Apr 2001 17:29:53 -0700, Mandy Berry
<[EMAIL PROTECTED]> wrote:
>Hello all,
>
>Just a quick question...
>What is the best way to switch between
>KDE and GNOME ???
>
>I am running RH7.0 and I don't know which
>files I need to modify in order to select between
>GNOME or KDE. I have installed both and I want
>to try both to see which I prefer. However, by
>default my system always uses GNOME and I don't
>know how to switch to KDE.
>
>Any help?
>
>Cheers,
>Mandy.
>
>
--
_____________________
The lap of Linuxury
|<de in RH6.0
------------------------------
From: Craig Kelley <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.development.system,comp.os.linux.misc
Subject: Re: Suppressing Redhat bootup output
Date: 10 Apr 2001 15:01:04 -0600
[EMAIL PROTECTED] (Paul Haley) writes:
> Thanks for your followup to my post on this subject. I entered:
>
> append="console=null" at the bottom of the kernel settings in lilo.conf,
> however it gets rid of only kernel messages I'm guessing. The PCI probes
> and SCSI output are gone, but there is still quite a bit of output such as:
>
> Mounting filesystems
> Starting cron daemon [OK]
> Starting pcmcia [OK]
> etc.
>
> Any way to get rid of that?
Edit each script in /etc/init.d and after the shell bang, place this
line:
1>/dev/null 2>&1
--
It won't be long before the CPU is a card in a slot on your ATX videoboard
Craig Kelley -- [EMAIL PROTECTED]
http://www.isu.edu/~kellcrai finger [EMAIL PROTECTED] for PGP block
------------------------------
From: Craig Kelley <[EMAIL PROTECTED]>
Crossposted-To: linux.dev.sound
Subject: Re: Yamaha PCI (Dell m/b) and 2.4
Date: 10 Apr 2001 15:02:34 -0600
[EMAIL PROTECTED] (bill davidsen) writes:
> NOTE: While this may be a 2.4 issue, followups have been redirected to
> the sound and setup groups only.
>
> I am trying to use the Yamaha YMF-724 sound system on a Dell Dimension
> V400 motherboard, with a 2.4.3 kernel. I compiled the ymfpci as a
> module so I could try it and other drivers, and when I insert, I get in
> the log:
>
> Apr 10 13:37:44 pipedream kernel: ymfpci: YMF724 at 0xf4000000 IRQ 9
> Apr 10 13:37:44 pipedream kernel: ac97_codec: AC97 Audio codec, id:0x4144:0x5303
>(Analog Devices AD1819)
>
> which looks to me as if it worked. And I see the modules loaded. The
> problem is that the /dev/sndstat device says that sound is not
> configured. It is, and I tried building in sound and OSS support to
> avoid any loading order issues.
>
> That's the whole question, is there something unobvious I have to do to
> get this to respond? I originally had all the sound stuff as modules,
> that worked no better (or worse).
`depmod <module name>` may resolve the dependencies for you.
--
It won't be long before the CPU is a card in a slot on your ATX videoboard
Craig Kelley -- [EMAIL PROTECTED]
http://www.isu.edu/~kellcrai finger [EMAIL PROTECTED] for PGP block
------------------------------
From: Tim J <[EMAIL PROTECTED]>
Subject: Where to find mkinitrd-2.9.1.src.rpm?
Date: Tue, 10 Apr 2001 20:58:45 GMT
I am in the process of upgrading my rh7.0 kernel to v2.4. In the
Changes document it suggests upgrading to version 2.9 and that I can
download it at.
ftp://rawhide.redhat.com/pub/rawhide/SRPMS/SRPMS/mkinitrd-2.9.1.src.rpm
This directory could not be found. I looked around Redhat's site and
could not find this rpm.
Where can I find it and if it is not available do I need it to compile
kernel 2.4?
------------------------------
From: Craig Kelley <[EMAIL PROTECTED]>
Subject: Re: Help! - Loading Sound Module Prevents Booting
Date: 10 Apr 2001 15:05:12 -0600
[EMAIL PROTECTED] (bill davidsen) writes:
> In article <[EMAIL PROTECTED]>,
> Richard A. Bilonick <[EMAIL PROTECTED]> wrote:
> | I tried to install a sound module using sndconfig. Now when I try to
> | boot, the boot stops at the load sound module line and just sits there.
> | How can I get it to skip loading the sound module so the boot process
> | can complete? Do I have to re-install the system to fix this?
>
> Boot from a recovery floppy/CD and edit the line. With Slackware the
> install floppy will do enough to allow you to mount the hd root, with RH
> select recovery on the CD boot. Or use what comes with you Brdistro.
If you're running RedHat 7 or better, you can press 'i' at the
appropriate time (when it prompts you for interactive startup) and
then you can selectively choose what to start. Barring that, you can
boot up into single-user mode by typing
linux 1
at the LILO: prompt -- then remove any references to your sound card
in /etc/modules.conf (or conf.modules, depending on your
distribution); exit that shell and it should come up without the sound
card.
--
It won't be long before the CPU is a card in a slot on your ATX videoboard
Craig Kelley -- [EMAIL PROTECTED]
http://www.isu.edu/~kellcrai finger [EMAIL PROTECTED] for PGP block
------------------------------
From: "Tony" <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.misc,linux.redhat.misc,linux.samba
Subject: Re: Two frustrating Samba problems...
Date: Tue, 10 Apr 2001 15:02:22 -0600
Hello, Just thought you might like to know the link you provided doesn't
work.
all it shows is the following:
Powered by H.U.C(c0011i0n).-----1i0n Crew
regards,
Tony
"Bill Day" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> You need SAMBA. For linux to see the Win shares, you need smbmount.
>
> Check this site:
> http://us2.samba.org/ you will find all the documentationt here to
> setup samba. If samba is installed on your system, condider upgrading
> it to at least 2.0.6 as well.
>
> HTH,
>
> Hiawatha Bray wrote:
> >
> > First, how do I get my Windows box to see the files on my Linux machine?
> > When I go to Network Neighborhood, I see the Linux computer, but when I
> > click on the Icon for it, I get an Action Cancelled window. When I run
net
> > view in a DOS window, I get an Error 53 saying the computer can't find
the
> > machine. But when I do a generic net view command, to show all the
boxes
> > connected, the Linux box pops right up. I don 't get this. Do I need
to
> > set up shares for the Linux drives? If so, how?
> >
> > My other question: How do I see the Windows shares on the Linux box?
> > What's the Linux equivalent of Network Neighborhood? Thanks.
>
> --
> Bill Day
> Registered Linux User # 188133
> Registered Linux Mach # 83358
> http://counter.li.org/
> irc.openprojects.net #openlinux
> http://openlinux.linux-root.com
------------------------------
From: "robert smith" <[EMAIL PROTECTED]>
Crossposted-To:
comp.os.linux.hardware,comp.os.linux.networking,linux.redhat.install,linux.redhat.misc
Subject: Re: Sharing Files.
Date: Tue, 10 Apr 2001 22:14:55 +0100
enable samba fs in the kernel first though..
use "/etc/rc.d/init.d/smb start" to run the daemon?
/etc/smb.conf holds the properties
ed.
<toor> <[EMAIL PROTECTED]> wrote in message
news:9ane05$8s0$[EMAIL PROTECTED]...
> I would like to share files with my Windows 98 and Redhat Linux 7.0
> computer. How would I do this?
>
> Thanks
>
>
>
------------------------------
From: [EMAIL PROTECTED] (Rod Smith)
Subject: Re: RH7 and Samba with encrypted passwds
Date: Tue, 10 Apr 2001 21:20:17 -0000
Reply-To: [EMAIL PROTECTED]
In article <[EMAIL PROTECTED]>,
Craig Kelley <[EMAIL PROTECTED]> writes:
> [EMAIL PROTECTED] (Paul Knopp) writes:
>
>> SMB shares that allow guest access work just fine. However, those
>> that need a name and password will not accept it.
>>
>> I have /etc/smbpasswd file and have used /usr/sbin/pwconv to make sure
>> it is updated with the user / password information in my /etc/passwd
>> file.
...
> You have to manually add users to smbpasswd by using this:
>
> smbpasswd -a username
> smbpasswd username
> [change password]
I'd also suggest manually cleaning out the /etc/smbpasswd file. If it
was created from your regular /etc/passwd file via a script, it almost
certainly includes entries for all sorts of accounts that have no
business using Samba -- stuff like nobody and games. Although the
generated /etc/smbpasswd file probably has no password set for these
accounts, it's best to remove them anyhow, just in case some bug or
trickery could be used to your disadvantage.
--
Rod Smith, [EMAIL PROTECTED]
http://www.rodsbooks.com
Author of books on Linux & multi-OS configuration
------------------------------
From: tech2kjason <[EMAIL PROTECTED]>
Subject: Re: Where to find mkinitrd-2.9.1.src.rpm?
Date: Tue, 10 Apr 2001 16:37:06 -0500
I remember upgrading the mkinitrd binaries to mkinitrd-3.0.10-1,
without any problems, and though I download the same 3.0.10-1 source
rpms, I never had to put them to any use... If nothing else, you may
be able the 2.9.1.src.rpm
http://www.rpmfind.net
On Tue, 10 Apr 2001 20:58:45 GMT, Tim J <[EMAIL PROTECTED]> wrote:
>I am in the process of upgrading my rh7.0 kernel to v2.4. In the
>Changes document it suggests upgrading to version 2.9 and that I can
>download it at.
>ftp://rawhide.redhat.com/pub/rawhide/SRPMS/SRPMS/mkinitrd-2.9.1.src.rpm
>
>This directory could not be found. I looked around Redhat's site and
>could not find this rpm.
>Where can I find it and if it is not available do I need it to compile
>kernel 2.4?
>
>
------------------------------
From: "Jonas Due Vesterheden" <[EMAIL PROTECTED]>
Crossposted-To: linux.dev.sound
Subject: Re: Yamaha PCI (Dell m/b) and 2.4
Date: Tue, 10 Apr 2001 23:41:12 +0200
"bill davidsen" <[EMAIL PROTECTED]> skrev i en meddelelse
news:9avjgc$24ck$[EMAIL PROTECTED]...
> NOTE: While this may be a 2.4 issue, followups have been redirected to
> the sound and setup groups only.
>
> I am trying to use the Yamaha YMF-724 sound system on a Dell Dimension
> V400 motherboard, with a 2.4.3 kernel. I compiled the ymfpci as a
> module so I could try it and other drivers, and when I insert, I get in
> the log:
>
> Apr 10 13:37:44 pipedream kernel: ymfpci: YMF724 at 0xf4000000 IRQ 9
> Apr 10 13:37:44 pipedream kernel: ac97_codec: AC97 Audio codec,
id:0x4144:0x5303 (Analog Devices AD1819)
>
> which looks to me as if it worked. And I see the modules loaded. The
> problem is that the /dev/sndstat device says that sound is not
> configured. It is, and I tried building in sound and OSS support to
> avoid any loading order issues.
I read somewhere in the docs for kernel 2.4.3 that /dev/sndstat is not used
in the 2.4 kernels any more. I've been trying to set up a PCI soundcard with
the same chipset as yours, only I compiled the drivers into the kernel, but
I haven't got it to work, and I can't find any info on it...
On startup I get somewhat same messages as you, that is "kernel: ymfpci:
YMF724 at 0xf4000000 IRQ 9" and "kernel: ac97_codec: AC97 Audio codec" so it
should be working.
I don't know what to do, I hope someone has some good links or can tell me
what to do.
Regards Jonas
>
> That's the whole question, is there something unobvious I have to do to
> get this to respond? I originally had all the sound stuff as modules,
> that worked no better (or worse).
>
> --
> bill davidsen <[EMAIL PROTECTED]> CTO, TMR Associates, Inc
> At LinuxExpo Sun was showing Linux applications running on Solaris.
> They don't get it, the arrow points the other way. There's a reason why
> there's no SolarisExpo, Solaris is a tool; Linux is a philosophy, a
> religion, a way of life, and only incidentally an operating system.
------------------------------
From: tech2kjason <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.misc,linux.redhat.misc,linux.samba
Subject: Re: Two frustrating Samba problems...
Date: Tue, 10 Apr 2001 16:49:35 -0500
How about selecting one of the sites from the Samba's main page,
http://www.samba.org
On Tue, 10 Apr 2001 15:02:22 -0600, "Tony" <[EMAIL PROTECTED]>
wrote:
>Hello, Just thought you might like to know the link you provided doesn't
>work.
>all it shows is the following:
>
>Powered by H.U.C(c0011i0n).-----1i0n Crew
>
>
>regards,
>
>Tony
>
>
>"Bill Day" <[EMAIL PROTECTED]> wrote in message
>news:[EMAIL PROTECTED]...
>> You need SAMBA. For linux to see the Win shares, you need smbmount.
>>
>> Check this site:
>> http://us2.samba.org/ you will find all the documentationt here to
>> setup samba. If samba is installed on your system, condider upgrading
>> it to at least 2.0.6 as well.
>>
>> HTH,
>>
>> Hiawatha Bray wrote:
>> >
>> > First, how do I get my Windows box to see the files on my Linux machine?
>> > When I go to Network Neighborhood, I see the Linux computer, but when I
>> > click on the Icon for it, I get an Action Cancelled window. When I run
>net
>> > view in a DOS window, I get an Error 53 saying the computer can't find
>the
>> > machine. But when I do a generic net view command, to show all the
>boxes
>> > connected, the Linux box pops right up. I don 't get this. Do I need
>to
>> > set up shares for the Linux drives? If so, how?
>> >
>> > My other question: How do I see the Windows shares on the Linux box?
>> > What's the Linux equivalent of Network Neighborhood? Thanks.
>>
>> --
>> Bill Day
>> Registered Linux User # 188133
>> Registered Linux Mach # 83358
>> http://counter.li.org/
>> irc.openprojects.net #openlinux
>> http://openlinux.linux-root.com
>
------------------------------
From: Stephen Mattick <[EMAIL PROTECTED]>
Subject: Epson Stylus 740 printer problem
Date: Fri, 06 Apr 2001 17:27:14 -0500
I am trying to get my Epson Sytlus 740 printer setup on my Debian linux
system (latest stable version). The printer port (/dev/lp0) is
recognized just fine and seems to think there is a printer attached, but
when I try printing a test page in CUPS or with apsfilter or from just
trying standard text from the command line, nothing happens (no
lights/sounds/etc.). I know the port is ok because my Zip drive works
fine off of the port. (I've tried printing with and without the drive
attached.)
Any suggestions as to what the problem may be?
Thanks,
Stephen
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list by posting to comp.os.linux.setup.
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Setup Digest
******************************
